Googles documentation on installing the library, found here: https://github.com/googleads/googleads-php-lib/blob/master/README.md#getting-started, instructs us to copy adsapi_php.ini, as constructed here: https://github.com/googleads/googleads-php-lib/blob/master/examples/AdWords/adsapi_php.ini, to your home directory.
I filled out the necessary variables in the .ini, and I am using docker so I have placed this file inside my container at /var/www/home/node/ and when I run the command composer require googleads/googleads-php-lib I am given the following error in the command prompt:
Your requirements could not be resolved to an installable set of packages.
Problem 1
- Installation request for googleads/googleads-php-lib ^37.1 -> satisfiable by googleads/googleads-php-lib[37.1.0].
- googleads/googleads-php-lib 37.1.0 requires ext-soap * -> the requested PHP extension soap is missing from your system.
To enable extensions, verify that they are enabled in your .ini files:
- /usr/local/etc/php/php.ini
- /usr/local/etc/php/conf.d/adsapi_php.ini
- /usr/local/etc/php/conf.d/docker-php-ext-pdo_pgsql.ini
- /usr/local/etc/php/conf.d/docker-php-ext-sodium.ini
- /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
You can also run `php --ini` inside terminal to see which files are used by PHP in CLI mode.
Installation failed, reverting ./composer.json to its original content.
I assumed the issue was my adsapi_php.ini was simply in the wrong location as it contains what I believe is necessary to avoid the above issue, but I have tried placing it in several different places and yet I always get the same error.
Any help would be appreciated!
Just try to edit php.ini inside docker (docker exec -t {container} bashand enable there the extenstion soap
How do you find out on OpenShift which apache modules are loaded?
I tried following the instructions here, and can see the compiled in modules by running /usr/sbin/httpd -l. However if I try to run /usr/sbin/httpd -M, or an equivalent command, I get an error: "Could not open configuration file /etc/httpd/conf/httpd.conf: Permission denied". I also get a permission denied error if I try to open the config file in read only with a text editor, via nano -v /etc/httpd/conf/httpd.conf.
I'm using the Python 3.3 cartridge. I can't find any way of finding the apache modules directly from python (the list of loaded modules doesn't seem to be passed via the environ argument to the WSGI app object).
Also, trying via php doesn't help. php -r "phpinfo();" doesn't give the info - I've grepped in the output for 'apache' and 'mod_', and looked with the naked eye, and there's no sign of any apache module data. Trying apache_get_modules also didn't work, the function is undefined.
I was particularly wondering if the mod_setenvif module was available (the SetEnvIf command doesn't seem to be working for me..)
You can view the currently loaded apache modules by looking at the following file on your gear: /php/usr/shared/etc/conf/httpd.conf
My goal is to demonstrate creating a local debian repository with controlled versions of tools used (e.g. compiler versions) to make a build system more predictable.
I've tried to follow this example: http://linuxconfig.org/easy-way-to-create-a-debian-package-and-local-package-repository
but when I get to the apt-get update stage, I always get a 404 not found on the repository I've added.
The apache2 server is running, I can view the default page installed at http://localhost/html/index.html.
I am trying this with the file fortune-mod_1%3a1.99.1-7_amd64.deb installed to /var/www/debs. I create the Packages.gz file as the tutorial suggests:
dpkg-scanpackages debs /dev/null | gzip -9c > debs/Packages.gz
I also add a new file: /etc/apt/sources.list.d/myppa.list with this line:
deb http://localhost debs/
I restart the apache2 service just in case:
sudo service apache2 restart
but running:
sudo apt-get update
still produces this error:
W: Failed to fetch http://localhost/debs/Packages 404 Not Found
Is there something basic I'm missing? Ultimately, I'd like to get this working over a LAN, but first have to get it working on a single machine.
EDIT: I'm doing this on Ubuntu 14.04.
EDIT: Show contents of file /etc/apt/sources.list.d/myppa.list
tldr; use aptly
It's the easiest apt repository management tool I've found and it comes with neat tutorial showing how to create, populate, and publish your own apt repository.
References:
https://www.aptly.info/
https://www.aptly.info/tutorial/repo/
I ended up solving the problem. It was an issue with the default document root being different for the tutorial than on my system. All I did was move my debs folder to html (document root turns out to be /var/www/html, not just /var/www on my install). That did the trick.
I have been using php for CGI scripting for some time now and recently got interested in lua.
I installed the latest version of luarocks(2.1.2) and the bundled version of lua(5.1.4). I wanted to start from the basics and hence installed cgilua(5.1.4-2) and all its dependencies using "luarocks install cgilua".
I am able to run simple lua scripts using the shebang line to point to my lua interpreter but when i use it to point to the cgi launcher "cgilua.cgi.exe" to run .lp files it just won't work. I edited my httpd configuration file to allow cgi execution in my htdocs and cgi-bin directory and used the cgi-script handler for .lp pages. I am trying to run the login.lp example in the cgilua examples directory. I even added the line "Content-type:text/html" to no avail. Executing the cgilua.cgi.exe file from the command line without arguments just closes the application with the message "cgilua.cgi.exe" stopped working".
Could anyone tell me what am I missing? Maybe the launcher is supposed to be used in a different way?
I don't suppose permissions have a part to play in this as in windows all users have at least read and execute permissions.
The url I'm trying to access is http://localhost/login.lp. My apache error log shows "Premature end of script headers: login.lp" with a 500 internal server error and the same thing if I access http://localhost/cgilua.cgi.exe
I don't know what your requirements are, but perhaps it will be easier to simply use apache's mod_lua.
http://httpd.apache.org/docs/trunk/mod/mod_lua.html
php -v gives this
PHP Warning: PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20060613
PHP compiled with module API=20090626
These options need to match in Unknown on line 0
PHP Warning: PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20060613
PHP compiled with module API=20090626
These options need to match in Unknown on line 0
bogus test name tests/
ps. i've upgraded from php 5.2 to 5.3. before this everything worked okay.
When you update the version of PHP (especially when going from version X.Y to version X.Z), you must update the PHP extensions as well.
This is because PHP extensions are developped in C, and are "close" to the internals of PHP -- which means that, if the APIs of those internals change, the extension must be re-compiled, to use the new versions.
And, between PHP 5.2 and PHP 5.3, for what I remember, there have been some modifications in the internal data-structures used by the PHP engine -- which means extensions must be re-compiled, in order to match that new version of those data-structures.
How to update your PHP extensions will depend on which system you are using.
If you are on windows, you can find the .dll for some extensions here : http://downloads.php.net/pierre/
For more informations about the different versions, you can take a look at what's said on the left-sidebar of windows.php.net.
If you are on Linux, you must either :
Check what your distribution provides
Or use the pecl command, to re-download the sources of the extensions in question, and re-compile them.
just
pecl uninstall module_name
then
pecl install module_name
Your problem is within the php5-dev package. I guess you went from php5.2 on an older linux version to php5.3. I did the same thing, and when I managed to install php 5.3 there was a conflict with php5-dev. For some reason it doesn't get upgraded to the new version. Dunno why is that and I don't care, however this makes your extension compiled with the older API version, while php ofc is with the newer api version. What I did to solve this problem was:
I removed php5-dev with
sudo apt-get remove php5-dev, then I ran sudo apt-get autoremove to get rid of the leftovers that were giving me the trouble, and after that I just installed php5-dev again.
sudo apt-get install php5-dev.
Once that was done, I removed my memcache with sudo pecl uninstall memcache and installed it again sudo pecl install memcache. Now both the module and the php had the same api version so I knew right away that I had the issue solved :)
Hope it helps.
It's possible that the modules are installed, but your PHP.ini still points to an old directory.
Check the contents of /usr/lib/php/extensions. In mine, there were two directories: no-debug-non-zts-20060613 and no-debug-non-zts-20060613. Around line 428 of your php.ini, change:
extension_dir = "/usr/local/lib/php/extensions/no-debug-non-zts-20060613"
to
extension_dir = "/usr/local/lib/php/extensions/no-debug-non-zts-20090626"
Then restart apache. This should resolve the issue.
I struggled with this issue for a long time and found out that when you run configure, just pass it the path to the correct php-config tool.
In my case, it was
./configure --with-php-config=/usr/local/zend/bin/php-config
... If you're unsure, run a locate php-config on your machine and find the right one amongst the different versions installed.
Hope this helps somebody in the future.
PS. My default php-config was set to 20090926 which is PHP 5.3. The one I manually entered as a param for ./configure was for PHP 5.4 (2010...)
I had this part enabled in my php.ini
extension=php_memcache.dll
[Memcache]
memcache.allow_failover = 1
memcache.max_failover_attempts=20
memcache.chunk_size =8192
memcache.default_port = 11211
After commenting these lines composer was installed in my windows 10
I had a similar issue after upgrading from PHP 5.5 to PHP 5.6. The phpize and php-config libraries being used to compile the phalcon extension were still the ones from PHP 5.5. I had to run the command below:
sudo apt-get install php5.6-dev
There will be a long stacktrace, the key information I saw was this:
update-alternatives: using /usr/bin/php-config5.6 to provide /usr/bin/php-config (php-config) in auto mode
update-alternatives: using /usr/bin/phpize5.6 to provide /usr/bin/phpize (phpize) in auto mode
I hope this helps someone.
Before you phpize, make sure to update your path ($PS1) to point to the new PHP! phpize uses your environment, and if you still have vestiges of your old PHP in your path or other parts of the environment, things will get hairy!
I'd the same error even after recompiling the modules.
But I solved it you just have to specify the absolute path of your phpize.
Here is the one that works with php 5.5. Download xampp 1.8.3 from here and download memcache dll from here
In my case in php.ini
[CLDbg]
extension=php_cl_dbg_5_3_VC9.dll
clport=6000
I removed Codelobster which support different PHP version, so need to update to:
[CLDbg]
;extension=php_cl_dbg_5_3_VC9.dll
;clport=6000
This problem has just happened to me and has been solved simply by increasing
memory_limit from 32 M to 64 M
You can adjust the value on the file where php.ini exists
locate php.ini
then choose the right file and search for memory_limit and after modifying it
you must reboot the apache
/etc/init.d/httpd restart
All the best.
In my case, I used lnmp to install php with version 5.4.45. But maybe because I installed php5-dev after lnmp (which I guess is not necessary if you installed lnmp), my phpize and php-config both point to older version tools than php.
I solved this by change the soft link of /etc/alternatives/phpize and /etc/alternatives/php-config to /usr/local/php/bin/phpize and /usr/local/php/bin/php-config.
Hopes this is helpful.
What worked for me was simply to do the following:
open the php.ini file.
Under the DYNAMIC EXTENSIONS heading, comment out the following line as
;extension=php_java.dll
Restarted Apache and all was fine