I have a group of RadioButtons in VB.NET. I would like to create one function that will handle all of them together. My code is below.
Private Sub employmentStatusChanged(ByVal sender As System.Object,_
ByVal e As System.EventArgs) Handles rbtnEmployed.CheckedChanged, _
rbtnUnemp.CheckedChanged, rbtnStudent.CheckedChanged, rbtnRetired.CheckedChanged
If rbtnEmployed.Checked Then
Dim employ As New Employer
employ.ShowDialog()
ElseIf rbtnStudent.Checked Then
Dim stud As New Students
stud.ShowDialog()
ElseIf rbtnRetired.Checked Then
Dim employ As New Employer
employ.ShowDialog()
End If
End Sub
This function works fine the first time I click a button. The problem comes when I click on a different button. It fires once for the first button's changed state (from checked to unchecked) and then again for the second button (unchecked to checked).
Any ideas on how to stop this from happening? Thanks in advance!
You can't. However, sender is the radio button that was clicked. Just check the state of that. If sender.Checked is False, return from the event handler.
Related
I have a Textbox where you can write a Subject into it and press a button to send the new subject into a database. My combobox shows all subjects in the database and you can choose one and delete it. All programmed with Entity Framework. The Combobox is filled with values during Form.Load-Event.
When I write a new entry in the textbox the combobox has to refresh coz I want the possibility to delete the new entry as well.
I tried
cmb.refresh,
cmb.update
both not working, probably because the code to fill the comboboxes is in the form.load event. So i tried to refresh the form with
me.update
but this is not working too. Any idea how I can update (refill) my combobox?
Okay so take all the code in your Form.load event
Put this code into a new method called UpdateCbo.
Private Sub UpdateCbo()
// your form.load code
End Sub
Then in your form.load event, call this new method.
Public Sub FormLoad(ByVal sender As Object, ByVal e As EventArgs) Handles MyBase.Load
UpdateCbo()
End Sub
Then also if you want the combobox to refresh when you add a new entry, you can either hook UpdateCbo up to a button click event or the textchanged event of your combo box.
e.g:
Private Sub Cbo_TextChanged(sender As System.Object, e As System.EventArgs) Handles cbo.TextChanged
UpdateCbo()
End Sub
How do you fill and bind values to the combobox? You can take that code out into a separate function "fillComboBox", and call that upon filling the textbox.
If you post a code sample I can show you what I mean.
I'm showing a ToolTip on a certain button's MouseHover event. If I go over it once it works but if I leave, wait for the tooltip to disapear and come back on the button, it appears twice. I tried cancelling it on MouseLeave but it still appear twice the seocnd time.
Private Sub someButton_MouseHover(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles someButton.MouseHover
Dim tooltipSearch As New ToolTip()
tooltipSearch.Show("I'm a tooltip"), someButton)
End Sub
Private Sub someButton_MouseLeave(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles someButton.MouseLeave
Dim toolTip As New ToolTip()
toolTip.GetToolTip(someButton)
toolTip.Hide(someButton)
toolTip.Dispose()
End Sub
Am I missing something obvious?
You are using the ToolTip not in the way it should be used (also look at the documentation :) ). It is just like any other control, start by dragging it onto your form (like you do with other controls).
If you have no dynamic text to be displayed in your tooltip, you can easily set the text in your constructor, using the method SetToolTip. If you do want some dynamic text, you can use this method in your MouseHover event.
Apart from that, you shouldn't do anything anything else. Just set the right delays on your tooltip and it should work all fine.
Private Sub someButton_MouseHover(sender As Object, e As System.EventArgs) _
Handles someButton.MouseHover
ToolTip1.SetToolTip(someButton, "My name is Steve chamba from south Africa")
End Sub
The answer about dragging the ToolTip control to the form is great. There is a subtlety with Button controls though. They seem to automatically set the tool tip to the text of the button, so if you also call ToolTip1.SetToolTip(myButton, "Button Text") then dot-net draws two copies of the tool tip text when you hover over the button.
I can't seem to get input focus on a textbox when a tab page first comes up (I'm using Windows Forms, VB.NET 3.5).
I have a textbox on a panel on a tab page, and I want the focus to be on the textbox when the tab page comes up. I want the user to be able to start typing immediately in the focused textbox without having to click on the textbox. I have tab stops set in the order I want and the textbox is the first tab stop. The tab stops work except that when the tab page comes up the focus is not on the textbox, i.e. the one that's first in the tab order.
In the Enter event handler of the tab page I call the Focus method of the text box, but it returns False and does nothing, no error messages. I know I can access the text box because
at the same point in the code I can set the text of the text box.
If it matters, the layout of the tab page is a little complicated:
frmFoo/TabControl1/TabPageX/Panel1/Panel2/TextBox1
I want to set the focus on TextBox1.
What's the best way to get the focus on the desired textbox?
If setting focus is the best way, why is the textbox.Focus() method failing?
I would assume you are attempting to set focus in the form load event handler? If so, you need to do a Me.Show() to actually create the onscreen controls before focus can be set. Something along the lines of:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs)
Me.Show()
Application.DoEvents()
TextBox1.Focus()
End Sub
If you don't do the Me.Show(), the form is NOT displayed until the load event is complete.
For the tab control, handle the _SelectedIndexChanged event:
Private Sub TabControl1_SelectedIndexChanged(sender As Object, e As System.EventArgs) _
Handles TabControl1.SelectedIndexChanged
If TabControl1.SelectedTab.Name = "TabPage1" Then
TextBox2.Focus()
End If
If TabControl1.SelectedTab.Name = "TabPage2" Then
TextBox4.Focus()
End If
You will still want to set the initial focus in the load event as shown above if the first field selected is to be the textbox on the tab control.
Try either:
Me.ActiveControl = TextBox1
or
TextBox1.Select()
Do the control.Focus() in the OnShown event. You don't need any of the DoEvents logic which didn't work for me anyway.
You Should Use Selected Event of TabControl
Private Sub TabControl1_Selected(ByVal sender As Object, ByVal e As System.Windows.Forms.TabControlEventArgs) Handles TabControl1.Selected
If e.TabPage.Name = "TabPage1" Then
TextBox1.Select()
End If
End Sub
As I have Checked in Both TabControl.Selected and TabPage.Enter Event can set Select TextBox. I think there is some other elements stealing focus. please varify
Any of the solutions I found online don't solve the problem when the control is on a tab page.
However, this works:
(1) set the TabIndex of the control to 0.
(2) In your code that handles the tabpage event, do the following:
SendKeys.Send("{TAB}")
If SendKeys doesn't seem to be a valid statment, make sure you have the following import at the top of your code file:
Imports System.Windows.Forms
I found that the TabControl gets the focus when the Selected event completes. To make this work I used the Paint event of the TabPage to set the focus of the desired object.
Private Sub TabChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Tab1.Paint, Tab2.Paint, Tab3.Paint
Select Case sender.Name
Case "Tab1"
Textbox1.Focus()
Case "Tab2"
T3extbox2.Focus()
Case "Tab3"
Textbox3.Focus()
End Select
End Sub
Try the Activated event of the form like this:
Private Sub Form2_Activated(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Activated
'SendKeys.Send("{TAB}") this line works too
TextBox1.Focus()
End Sub
That is guaranteed to work.
I once had the same problem but i solved it using the Me.activate() function.
there is a feature I'd like to implement in my application:
The user right clicks on my picturebox object. Good.
When that happens, some code of mine executes and will generate a list of options.
Then a menu appears where the mouse right-clicked, made up of these options.
When the user clicks on one of these options, the menu is deleted and some code is run given the option index as parameter.
My two problems:
How can I tell when the user right clicks? I can see an event handler for "click", but that includes left clicks....
How do I create one of these menus? I mean, go ahead and right click something. That's the kind of menu I'm looking for.
You need to implement the picturebox' MouseUp event. Check if the right button was clicked, then create a ContextMenuStrip with the menu items you want. You can use, say, the Tag property of the items you add to help identify them so you can give them a common Click event handler. Like this:
Private Sub PictureBox1_MouseUp(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles PictureBox1.MouseUp
If e.Button <> Windows.Forms.MouseButtons.Right Then Return
Dim cms = New ContextMenuStrip
Dim item1 = cms.Items.Add("foo")
item1.Tag = 1
AddHandler item1.Click, AddressOf menuChoice
Dim item2 = cms.Items.Add("bar")
item2.Tag = 2
AddHandler item2.Click, AddressOf menuChoice
'-- etc
'..
cms.Show(PictureBox1, e.Location)
End Sub
Private Sub menuChoice(ByVal sender As Object, ByVal e As EventArgs)
Dim item = CType(sender, ToolStripMenuItem)
Dim selection = CInt(item.Tag)
'-- etc
End Sub
To your first question: you actually handle just the "click" event, there is no separate event for right-click. But look at the EventArgs object you get passed for the event: it includes information of which button was pressed (and would give you more info if a mouse click had anything beyond that). So you check the button within an if block, and you're good to go.
To your second question: http://msdn.microsoft.com/en-us/library/system.windows.forms.contextmenustrip.aspx. If your menu is pre-defined, just look for that component on the Designer and prepare the menu from there and call its Show() method from the click handler. If you need to decide the menu entries on the fly, the linked documentation page actually includes an example on that ;)
PS: oops, I just noticed Jon's comment on the question. The answer I gave you is for Windows Forms. If you are on WPF let us know and I'll update with the details (although the concepts ain't too different).
There is actually an easier way to do this. Double-click on the control you wish to be able to right click. Now go to the top of the page and it should say in comboboxes; 'Control' and 'Click' Click on the 'click' combobox and look for: Right-Click. Use a ContextMenuStrip for your right click menu.
Now you can choose which function you want.
Private Sub PictureBox1_RightClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.RightClick
ContextMenuStrip1.Show()
MsgBox("Content Activated.", MsgBoxStyle.Information, "Success!")
End Sub
Hope I could help. :)
Coridex73
i have a databound datagrid in vb.net 2008. This is a program where i use the double click event multipal times.. but for some reason on a new form it's not working anymore. In code behind i selected the datagrid and double click event. when i double click on teh grid in debug mode, it never fires off the event(i put a breakpoint in). I've tried several other events and none of them are firing.
Here is what the event look like
Private Sub dgWho2_DoubleClick(ByVal sender As Object, ByVal e As System.EventArgs) Handles dgWho2.DoubleClick
End Sub
and here is what it looks like for one that is working on another form
Private Sub dgQueryStats_DoubleClick(ByVal sender As Object, ByVal e As System.EventArgs) Handles dgQueryStats.DoubleClick
For Each O As asr.QueryStat In Os
If O.RowID = CInt(Me.dgQueryStats.Tag.ToString) Then
Me.lblQuery.Text = O.Text
End If
Next
Me.cmdCopyQuery.Visible = True
End Sub
in comparing the properties of the two datagrid, other than the name and the binding, they look the same as well. wondering if anyone has an idea.
thanks
shannon
Err... found my problem.. i had a datagrid.enabled=false stuck down in some code...
Sorry about that
shannon