I am breaking my head on this issue since long. I have stored procedure in MS SQl and when I try to execute that procedure by providing all the parameters in SQL Query, it takes long time to execute but when I try to directly run the query which is there in SP it executes in no time. This is affecting my application performance also as we are using stored procedures to fetch the data from DB Server.
Please help.
Regards,
Vikram
Looks like parameter sniffing.
Here is a nice explanation: I Smell a Parameter!
Basically, sql server has cached query execution plan for the parameters it was first run with so the plan is not optimal for the new values you are passing. When you run the query directly the plan is generated at that moment so that's why it's fast.
You can mark the procedure for recompilation manually using sp_recompile or use With Recompile option in its definition so it is compiled on every run.
Related
I have run into an enigma of sorts while researching a performance issue with a specific stored procedure. I did not create that stored procedure, and the logic is fairly ugly with nested selects in join statements, etc...
However, when I copy the logic of the stored procedure directly into a new query window, add the parameters at the top and execute it, this runs in under 400 milliseconds. Yet, when I call the stored procedure and execute it with the exact same parameter values, it takes 23 seconds to run!
This makes absolutely no sense at all to me!
Are there some server-level settings that I should check which could potentially be impacting this?
Thanks
Recompile your stored procedure.
The Microsoft documentation says
When a procedure is compiled for the first time or recompiled, the procedure's query plan is optimized for the current state of the database and its objects. If a database undergoes significant changes to its data or structure, recompiling a procedure updates and optimizes the procedure's query plan for those changes. This can improve the procedure's processing performance.
and
Another reason to force a procedure to recompile is to counteract the "parameter sniffing" behavior of procedure compilation. When SQL Server executes procedures, any parameter values that are used by the procedure when it compiles are included as part of generating the query plan. If these values represent the typical ones with which the procedure is subsequently called, then the procedure benefits from the query plan every time that it compiles and executes. If parameter values on the procedure are frequently atypical, forcing a recompile of the procedure and a new plan based on different parameter values can improve performance.
If you run the SP's queries yourself (in SSMS maybe) they get compiled and run.
How to recompile your SP? (See the doc page linked above.)
You can rerun its definition to recompile it once. That may be enough if the procedure was first defined long ago in the life of your database and your tables have grown a lot.
You can put CREATE PROCEDURE ... WITH RECOMPILE AS into its definition so it will recompile every time you run it.
You can EXEC procedure WITH RECOMPILE; when you run it.
You can restart your SQL Server. (This can be a nuisance; booting the server magically makes bad things stop happening and nobody's quite sure why.)
Recompiling takes some time. But it takes far less time than a complex query with a bad execution plan would.
So... I ended up turning the nested selects on the joins to table variables, and now the sproc is executing in 60-milliseconds, while the in-line sql is taking 250=ms.
However, I still do not understand why the sproc was performing so much slower than the in-line sql version with the original nested sql logic?
I mean, both were using the exact same sql logic, so why was the sproc taking 23-seconds while the in-line was 400-ms?
I have one stored procedure in sybase which is taking more time for the first run than for runs directly after.
While creating this stored procedure, I am using with recompile option. So it shouldn't save any plan for the stored procedure. It will create new plan everytime the procedure executes.
Why would a stored procedure run faster the second time it is run?
This is most likely because of sybase internal cache.
So the first time stored the relevant data in the cache and that's why the second time is faster.
You can check with sp_helpcache to see what's configured.
In SSIS Execute SQL Task currently I am calling a stored procedure and inside the procedure I have a MERGE statement.
Is there any difference if I call that query (T-SQL MERGE) directly in the Execute SQL Task?
(are there any differences like Log will create if we used SP?)
Please reply me...
Thanks in advance
Stored procedure will provide you with a more maintainable solution as you will be able to leverage code reuse and there will be no need to change / re-release the package if your query logic changes
A stored procedure is also likely to provide you with the fastest execution time as it will be compiled and the execution plan will be reused on subsequent runs
I have two SQL queries with about 2-3 INNER JOINS each. I need to do an INTERSECT between them.
Problem is that indiividually the queryes work fast, but after intersecting take about 4 seconds in total.
Now, if I put an OPTION (RECOMPILE) at the end of this whole query, the query works great again working quite fast returning almost instantly!.
I understand that option recopile forces a rebuild of execution plan, so I am confused now if my earler query taking 4 seconds is better or now the one with recompile, but taking 0 seconds is better.
Rather than answer the question you asked, here's what you should do:
Update your statistics:
EXEC sp_updatestats
If that doesn't work, rebuild indexes.
If that doesn't work, look at OPTIMIZE FOR
WITH RECOMPILE is specified SQL Server does not cache a plan for this stored procedure,
the stored procedure is recompiled each time it is executed.
Whenever a stored procedure is run in SQL Server for the first time, it is optimized and a query plan is compiled and cached in SQL Server's memory. Each time the same stored procedure is run after it is cached, it will use the same query plan eliminating the need for the same stored procedure from being optimized and compiled every time it is run. So if you need to run the same stored procedure 1,000 times a day, a lot of time and hardware resources can be saved and SQL Server doesn't have to work as hard.
you should not use this option because by using this option, you lose most of the advantages you get by substituting SQL queries with the stored procedures.
So basically I have this relatively long stored procedure. The basic execution flow is that it SELECTS INTO some data into temp tables declared with the # sign and then runs a cursor through these tables to generate a 'running total' into a third temp table which is created using CREATE. Then this resulting temp table is joined with other tables in the DB to generated the result after some grouping etc. The problem is, this SP had been running fine until now returning results in 1-2 minutes. And now, suddenly, its taking 12-15 minutes. If I extract the query from the SP and executed it in management studio by manually setting the same parameters, it returns results in 1-2 minutes but the SP takes very long. Any idea what could be happening? I tried to generate the Actual Execution plans of both the query and the SP but it couldn't generate it because of the cursor. Any idea why the SP takes so long while the query doesn't?
This is the footprint of parameter-sniffing. See here for another discussion about it; SQL poor stored procedure execution plan performance - parameter sniffing
There are several possible fixes, including adding WITH RECOMPILE to your stored procedure which works about half the time.
The recommended fix for most situations (though it depends on the structure of your query and sproc) is to NOT use your parameters directly in your queries, but rather store them into local variables and then use those variables in your queries.
its due to parameter sniffing. first of all declare temporary variable and set the incoming variable value to temp variable and use temp variable in whole application here is an example below.
ALTER PROCEDURE [dbo].[Sp_GetAllCustomerRecords]
#customerId INT
AS
declare #customerIdTemp INT
set #customerIdTemp = #customerId
BEGIN
SELECT *
FROM Customers e Where
CustomerId = #customerIdTemp
End
try this approach
Try recompiling the sproc to ditch any stored query plan
exec sp_recompile 'YourSproc'
Then run your sproc taking care to use sensible paramters.
Also compare the actual execution plans between the two methods of executing the query.
It might also be worth recomputing any statistics.
I'd also look into parameter sniffing. Could be the proc needs to handle the parameters slighlty differently.
I usually start troubleshooting issues like that by using
"print getdate() + ' - step '". This helps me narrow down what's taking the most time. You can compare from where you run it from query analyzer and narrow down where the problem is at.
I would guess it could possible be down to caching. If you run the stored procedure twice is it faster the second time?
To investigate further you could run them both from management studio the stored procedure and the query version with the show query plan option turned on in management studio, then compare what area is taking longer in the stored procedure then when run as a query.
Alternativly you could post the stored procedure here for people to suggest optimizations.
For a start it doesn't sound like the SQL is going to perform too well anyway based on the use of a number of temp tables (could be held in memory, or persisted to tempdb - whatever SQL Server decides is best), and the use of cursors.
My suggestion would be to see if you can rewrite the sproc as a set-based query instead of a cursor-approach which will give better performance and be a lot easier to tune and optimise. Obviously I don't know exactly what your sproc does, to give an indication as to how easy/viable this is for you.
As to why the SP is taking longer than the query - difficult to say. Is there the same load on the system when you try each approach? If you run the query itself when there's a light load, it will be better than when you run the SP during a heavy load.
Also, to ensure the query truly is quicker than the SP, you need to rule out data/execution plan caching which makes a query faster for subsequent runs. You can clear the cache out using:
DBCC FREEPROCCACHE
DBCC DROPCLEANBUFFERS
But only do this on a dev/test db server, not on production.
Then run the query, record the stats (e.g. from profiler). Clear the cache again. Run the SP and compare stats.
1) When you run the query for the first time it may take more time. One more point is if you are using any corellated sub query and if you are hardcoding the values it will be executed for only one time. When you are not hardcoding it and run it through the procedure and if you are trying to derive the value from the input value then it might take more time.
2) In rare cases it can be due to network traffic, also where we will not have consistency in the query execution time for the same input data.
I too faced a problem where we had to create some temp tables and then manipulating them had to calculate some values based on rules and finally insert the calculated values in a third table. This all if put in single SP was taking around 20-25 min. So to optimize it further we broke the sp into 3 different sp's and the total time now taken was around 6-8 mins. Just identify the steps that are involved in the whole process and how to break them up in different sp's. Surely by using this approach the overall time taken by the entire process will reduce.
This is because of parameter snipping. But how can you confirm it?
Whenever we supposed to optimize SP we look for execution plan. But in your case, you will see an optimized plan from SSMS because it's taking more time only when it called through Code.
For every SP and Function, the SQL server generates two estimated plans because of ARITHABORT option. One for SSMS and second is for the external entities(ADO Net).
ARITHABORT is by default OFF in SSMS. So if you want to check what exact query plan your SP is using when it calls from Code.
Just enable the option in SSMS and execute your SP you will see that SP will also take 12-13 minutes from SSMS.
SET ARITHABORT ON
EXEC YourSpName
SET ARITHABORT OFF
To solve this problem you just need to update the estimate query plan.
There are a couple of ways to update the estimate query plan.
1. Update table statistics.
2. recompile SP
3. SET ARITHABORT OFF in SP so it will always use query plan created for SSMS (this option is not recommended)
For more options please refer to this awesome article -
http://www.sommarskog.se/query-plan-mysteries.html
I would suggest the issue is related to the type of temp table (the # prefix). This temp table holds the data for that database session. When you run it through your app the temp table is deleted and recreated.
You might find when running in SSMS it keeps the session data and updates the table instead of creating it.
Hope that helps :)