maven tomcat plugin or cargo plugin? - maven-2

The spring source code examples use maven tomcat plugin and i am able to run these projects using the command mvn tomcat:run but what i dont see the application is not deployed in local tomcat server("C:\apache tomcat\webapps\")..
And how it is different from cargo plugin? (In this case when i ran the command mvn cargo:redeploy, i see the application deployed in the location "C:\apache tomcat\webapps\")
If i add cargo plugin to the POM of spring examples (like mvn-showcase,petclinic)..will it screw up the things?

The spring source code examples use maven tomcat plugin and i am able to run these projects using the command mvn tomcat:run but what i dont see the application is not deployed in local tomcat server("C:\apache tomcat\webapps\")
The command tomcat:run starts an embedded Tomcat, it doesn't deploy an application to your local Tomcat (why does it matter anyway?).
And how it is different from cargo plugin?
Cargo is a container agnostic tool so you could configure it to use a remote container, a locally installed container, an embedded container (as long as implementations are provided for a given container) and still use an unified API (or set of commands).
In this case when I ran the command mvn cargo:redeploy, I see the application deployed in the location "C:\apache tomcat\webapps\"
Cargo doesn't support running Tomcat+6.x in embedded mode. So you are very likely using it with a locally installed container and your app gets physically deployed on it.
If i add cargo plugin to the POM of spring examples (like mvn-showcase,petclinic)..will it screw up the things?
It won't screw up anything, why would it.

You can use tomcat maven plugin and deploy it to external tomcat server.
see this link for all the available goals. tomcat-run will start a embedded server but tomcat:deploy works for external tomcat.

Related

Deploying appfuse app on cloudbees as war

I have appfuse maven project , is it better to deploy it using Click start Tomcat or as a Jenkin Maven project? I have tried both but it does not seem to be working in any ways. I have created database and bound it to the app. still it gives error for spring bean creation etc. Can anyone help in this scenario?
If I would need to deploy my appfuse maven application on CloudBees platform, I will try two different ways:
Use the Tomcat 7 Maven ClickStart as a template changing the SCM to your repo.
Use the CloudBees SDK to deploy your application.
In this last case, you just need to generate your .war file, in case you use maven, launching:
mvn clean package
And then you can deploy your application from the CLoudBees SDK using:
bees app:deploy -t tomcat7 -a APPID MYFILE.war
You say that when you deploy your application it gives error for spring bean creation. However, you don't attach any stacktrace to your question, so it is difficult to do any kind of diagnosis on our end.

Deploy from maven released repository to application

I just figured out, how to release to CB hosted maven "release" repository. I am trying to figure out, how to deploy tagged version to CB application.
I understand, I can manually upload WAR file but is there any script. As far as I know maven plugin for CB doesn't support it.
I have one appserver is running snapshot builds from jenkins.
I have other appserver, which I want to deploy only tagged/released artifact.
There are four ways to deploy applications to the CloudBees RUN#cloud service:
Using the bees command provided by the SDK
Using the bees-maven-plugin
Using the manual upload via the web GUI
Using the CloudBees Deployer plugin for Jenkins
Which option you choose depends on where the deployment will take place from... And the from I am talking about is which machine is doing the deployment not where the file is sourced.
If running from a Jenkins job, the best bet is the Jenkins plugin.
If running from your own laptop, the web ui or the bees command is simplest.
If running as part of a maven build, the maven plugin is simplest... (Though I should warn that the maven plugin (temporarily removing my cloudbees hat and putting on my maven PMC hat) is shite and does it all arsewise ;-) )
Your best bet is to set up a Jenkins job that uses dependency:get to pull the artifact from the repo and then add a cloudbees deployer build step to push to RUN#cloud
The good news is that bashing the maven plugin into something more maven like is on our roadmap... Hopefully that will enable actions like you can achieve with the ship-maven-plugin#mojo where you can specify a specific released version for "shipping" to production.
I suppose, that what you want to do is to deploy a release artifact to your repository.
have a look at maven-release-plugin.
Briefly, what you need to do is:
$ mvn release:prepare
$ mvn release:perform
it's not so trivial, since you need to configure appropriately your pom.xml to get it working. Have a look at the maven-release-plugin examples and usage pages.
Are you creating the tag/release from a Jenkins build? If so you could probably use the Deploy to CloudBees post-build step with target/checkout/something.war.
More generally I guess you would want to write a script to use mvn dependency:get followed by the Bees SDK to obtain the latest released artifact and deploy it.

How do you deploy a non-web Java app through CloudBees Jenkins "Deploy Now" feature?

With CloudBees now supporting deployment of Java applications, is it possible to use the post-build action in Jenkins "Deploy to CloudBees" to deploy your app? Furthermore, I'd like to use the Maven assembly plugin's jar-with-dependencies goal so that I can simply and automatically deploy my entire app to CloudBees right through Jenkins.
While the current CloudBees deployer Jenkins plugin appears to not support this, in fact it does. Here are the steps that after much trial and error worked for me:
Include the jar-with-dependencies maven plugin in your pom.xml. I used the <goal>single</goal> and <descriptorRef>jar-with-dependencies</descriptorRef> described here. That will put an additional jar file in your target folder {artifactId}-{version}-jar-with-dependencies.jar
Deploy that jar via the CloudBees API. The last line of this page explains how to do that. Specify your runnable jar, make sure the runtimeContainer=java, and the jar file to be uploaded, and it should deploy. Even though CloudBees says to use a zip file, a jar file works just fine.
Once that has been deployed once via the command line, your app ID now "remembers" those settings so that it can be done via Jenkins so long as you're doing the CloudBees Deploy to that same app. In your Jenkins job, add the "Deploy to CloudBees" Post-build action to your configuration. Click "Add Web Application" (strange, I know, since it's not a web-app! CloudBees says they will work to change that...), select First Match (even if it's a Maven project, use First Match), enter your application ID that you deployed your app to in step 2, and then enter the full name of your jar file and try your build again. It should upload your jar file and activate the instance in your CloudBees PaaS. Note that this still hard-codes the version in the jar file - I am working to see how to setup a variable for the version of the jar file so that it corresponds to the Maven build version.
Once you have it setup correctly and deployed initially with the bees sdk, it should just deploy from the deployer plugin on Jenkins as a war normally would.
Once set up, the settings that define where your main class is persist between deploys.

To use ServiceMix my project has to be an OSGi bundle?

I' starting to use ServiceMix and Camel and I've run through many examples.
It seems that the examples that are OSGi can be deployed in ServiceMix via hot deploy or via console, but I don't know how to deploy a project that is not an OSGI. Can it be done?
For example, I'm looking at the example project from Camel 2.10.0 called camel-example-cxf-proxy. I did some alterations and now I wanted to load it in ServiceMix. If I copy/paste to the deploy directory it is loaded but when I try to run it via osgi:start id it fails.
However if I run it from the IDE as a standalone it runs just fine and I can send and receive requests via SoapUI.
When I'm done with the examples I'll want to create my own project in eclipse and do tests in the IDE and in ServiceMix. I don't really understand the advantage of OSGi yet. SO I'm not too compelled to use OSGi for my project.
My main question is: Can I deploy a non-OSGi non-JBI compliant project in servicemix? Something like the camel-example-cxf-proxy. If yes, how can I do it? If no, how can I OSGi-fy the camel-example-cxf-proxy?
Thank you :)
Apache ServiceMix which uses Apache Karaf as its kernel, support pluggable deployment units. Though OSGi is the main unit.
You can deploy JBI artifacts (eg JBI was used as deployment units for Apache ServiceMix 3.x). So we offer that as a migration path to run JBI in SMX 4.x.
A plain WAR file can be deployed as well. You can for example just drop a .war file in the deploy directory. If you deploy from the shell, you need to prefix the deployer with war so it knows to use the war deployer.
There is some documentation about the various pluggable deployers here
http://fusesource.com/docs/esbent/7.0/esb_deploy_osgi/UrlHandlers.html
For example to install an Apache Wicket WAR example using Maven you can do from the shell:
osgi:install war:mvn:org.apache.wicket/wicket-examples/1.4.7/war?Web-ContextPath=wicket
The Apache documentation about deployer is mainly documented at Apache Karaf
http://karaf.apache.org/manual/2.2.9/users-guide/deployer.html
Now to deploy OSGi applications can be a bit of pain to assemble. And that is why FuseSource created FAB to make it much easier. I blogged about this a bit, which references to videos and more material: http://www.davsclaus.com/2012/08/osgi-deployment-made-easy-with-fab.html
With FAB you can just deploy regular Maven projects out of the box without any OSGi pain.
If your project is a maven project, you can try :
mvn install
Then start your servicemix, and in servicemix command line :
install mvn:groupId/artifactId/version
This will prompt a bundle ID. Then, juste start the bundle :
start <bundle_id>
You can check the state of your bundle with command "list"
The project has to be a bundle to be installed in servicemix / karaf. So the steps to make a camel project work in OSGi are the following.
Use the maven bundle plugin in the pom and configure it to import / export the necessary packages if necessary.
Make sure your camel context is defined in a way that OSGi can start. This is either in the activator of the bundle or in a spring config in the right location or with a blueprint config in the right location.
See two of my karaf tutorials for the details:
CXF: http://www.liquid-reality.de/x/EoBk
Camel: http://www.liquid-reality.de/x/G4Bk

How to use hot deployment and development mode with jboss and gwt

How to configure eclipse to hot deploy to jboss server side code? And how to configure google eclipse plugin to use development mode with jboss and the hot deployed code? What projects should I create?
Could someone give me step by step configuration how to do it.
I just want to use ejb/jpa/jms(optional) on the server side with hot deployment and at the same time to use ejbs in the gwt rpc implementations(or gwt-dispatch lib) with development mode. And at the end, i also want to build every thing with maven for production. Is this possible?
The three
gwt development mode
jboss hot deployment
mvn build and dependencies management
separately work, but combined how?
Everything I tried was unsuccessful.