I have an NSView that display an image, and i'd like to make this view acts like a cropping image effect. Then i make 3 rectangles (imageRect, secRect and IntersectRect), the imageRect is the rect which show an image, secRect is rect which just act to darken whole imageRect, and the intersectRect is a rect which like an observe rect, what i want to do is like make a "hole" on secRect to see directly into imageRect (without the darken). here's my drawRect method :
- (void)drawRect:(NSRect)rect {
// Drawing code here.
NSImage *image = [NSImage imageNamed:#"Lonely_Tree_by_sican.jpg"];
NSRect imageRect = [self bounds];
[image compositeToPoint:NSZeroPoint operation:NSCompositeSourceOver ];
if (NSIntersectsRect([myDrawRect currentRect], [self bounds])) {
//get the intersectionRect
intersectionRect = NSIntersectionRect([myDrawRect currentRect], imageRect);
//draw the imageRect
[image compositeToPoint:imageRect.origin operation:NSCompositeSourceOver];
//draw the secRect and fill it with black and alpha 0.5
NSRect secRect = NSMakeRect(imageRect.origin.x, imageRect.origin.y, imageRect.size.width, imageRect.size.height);
[[NSColor colorWithCalibratedRed:0.0 green:0.0 blue:0.0 alpha:0.5] set];
[NSBezierPath fillRect:secRect];
//have no idea for the intersectRect
/*[image compositeToPoint:intersectionRect.origin
fromRect:secLayer
operation:NSCompositeXOR
fraction:1.0];*/
}
//draw the rectangle
[myDrawRect beginDrawing];
}
I have my own class (myDrawRect) to draw a rectangle based on mouse click on [self bounds], so just ignore the beginDrawing command.
Any help would be fine, thanks. Hebbian.
You're doing far more work than you need to, and you're using deprecated methods (the compositeToPoint:operation: and compositeToPoint:fromRect:operation:fraction: methods) to do it.
All you need to do is send the image a single drawInRect:fromRect:operation:fraction: message. The fromRect: parameter is the rectangle you want to crop to; if you don't want to scale the cropped section, then the destination rect (the drawInRect: parameter) should have the same size.
About the only extra work you may need to do is if the image may be bigger than the view and you want to only draw the section that's within the view's bounds: When that happens, you'll need to inset the crop rectangle by the difference in size between the crop rectangle and the view bounds.
Related
I am making a pdf in an iPad app. Now i can make the pdf however want to add a picture with a rounded corner border. For example to achieve the effect i want on the border on a simple view item i use the following code.
self.SaveButtonProp.layer.cornerRadius=8.0f;
self.SaveButtonProp.layer.masksToBounds=YES;
self.SaveButtonProp.layer.borderColor=[[UIColor blackColor]CGColor];
self.SaveButtonProp.layer.borderWidth= 1.0f;
With the pdf i am using the following method to add the picture with the border to the pdf.
CGContextRef currentContext = UIGraphicsGetCurrentContext();
UIImage * demoImage = [UIImage imageWithData : Image];
UIColor *borderColor = [UIColor blackColor];
CGRect rectFrame = CGRectMake(20, 125, 200, 200);
[demoImage drawInRect:rectFrame];
CGContextSetStrokeColorWithColor(currentContext, borderColor.CGColor);
CGContextSetLineWidth(currentContext, 2);
CGContextStrokeRect(currentContext, rectFrame);
How do i round the corners?
Thanks
While drawing you can set clipping masks. For example, it's relatively easy to create a Bezier path with the shape of a rounded rectangle and apply that as clipping mask to your graphics context. Everything subsequently drawn will be clipped.
If you want remove the clipping mask later (for example because you have an image with rounded corners but follow that by other elements) you'll have to save the graphic state first, then apply your clipping mask and restore the graphics state when you're done with your rounded corners.
You can see actual code that comes pretty close to what I think you need here:
UIImage with rounded corners
You can use a method to get any UIView/UIImageView to PDF NSData:
UIImageView *imageView = [[UIImageView alloc] initWithImage:image];
NSData *data = [self makePDFfromView:imageView];
Method:
- (NSData *)makePDFfromView:(UIView *)view
{
NSMutableData *pdfData = [NSMutableData data];
UIGraphicsBeginPDFContextToData(pdfData, view.bounds, nil);
UIGraphicsBeginPDFPage();
CGContextRef pdfContext = UIGraphicsGetCurrentContext();
[view.layer renderInContext:pdfContext];
UIGraphicsEndPDFContext();
return pdfData;
}
Maybe you can change or use this code to help you with your problem.
OK, this is what I'm trying to do :
Get an NSImage containing, let's say a photo (1000+ x 1000+ dimensions).
Get another NSImage containing just a tranparent background and a simple black border (500x500).
"Combine" the 2 images, so that the resulting image is the photo with a border.
This is what I've achieved so far :
NSImage* resultImage = [[[self drop] image] copy];
[resultImage lockFocus];
NSRect newRect = NSMakeRect(0, 0, [[[self drop] image] size].width, [[[self drop] image] size].height);
[[[self drop2] image] drawInRect:newRect
fromRect:NSZeroRect
operation:NSCompositeSourceOver
fraction:1.0];
[resultImage unlockFocus];
[[self drop] setImage:resultImage];
Where [self drop] is an ImageWell containing the photo, and [self drop2] an ImageWell containing the border.
The thing is that it IS working. However, the resulting image is - quite obviously - showing a somewhat "stretched" border.
How could I resolve that? Given that the original photo should be of ANY dimensions, how could I make it to use a border (of some fixed dimensions) and still avoid stretching?
How about doing the border directly with CALayer, e.g.:
#import <QuartzCore/QuartzCore.h>
CALayer *layer = imageView.layer;
layer.borderColor = [[NSColor blackColor] CGColor];
layer.borderWidth = 10;
I would do this differently. Just size the image as desired and then add the border. You could do this just by having a simple view with black background, or a suitable image (assuming you want to have customizable image borders, like frames), sized to always keep the resulting border constant. Then you can generate a new image from that view, if you need to.
I have an NSView with a drawRect
- (void)drawRect:(CGRect)rect {
// Drawing code
NSPoint origin = [self visibleRect].origin;
[[NSGraphicsContext currentContext]
setPatternPhase:NSMakePoint(origin.x, origin.y)];
[[NSColor colorWithPatternImage: self.image] set];
[NSBezierPath fillRect: [self bounds]];
}
It draws my pattern perfectly, but i can see the pattern scroll when i change the the size of my window.
i have tried to set the view isFlipped to YES but that doesn't change anything.
You need to do some off-screen drawing first and then draw that result onto the view. For example you can use a blank NSImage of the exact same size as the view, draw the pattern on that image and then draw that image on the view.
Your code may look something like that:
- (void)drawRect:(NSRect)dirtyRect
{
// call super
[super drawRect:dirtyRect];
// create blank image and lock drawing on it
NSImage* bigImage = [[[NSImage alloc] initWithSize:self.bounds.size] autorelease];
[bigImage lockFocus];
// draw your image patter on the new blank image
NSColor* backgroundColor = [NSColor colorWithPatternImage:bgImage];
[backgroundColor set];
NSRectFill(self.bounds);
[bigImage unlockFocus];
// draw your new image
[bigImage drawInRect:self.bounds
fromRect:NSZeroRect
operation:NSCompositeSourceOver
fraction:1.0f];
}
// I think you may also need to flip your view
- (BOOL)isFlipped
{
return YES;
}
Swift
A lot has changed, now things are easier, unfortunately part of objective-C's patrimony is lost and when it comes to Cocoa, Swift is like an orphan child. Anyways, based on Neovibrant's we can deduct the solution.
Subclass NSView
Override draw method
Call parent method (this is important)
Set a fill on buffer within the bounds of the view
Draw fill on buffer
code
override func draw(_ dirtyRect: NSRect) {
super.draw(dirtyRect)
let bgimage : NSImage = /* Set the image you want */
let background = NSColor.init(patternImage: bgimage)
background.setFill()
bgimage.draw(in: self.bounds, from: NSZeroRect, operation: .sourceOver, fraction: 1.0)
}
I'm trying to overlay a custom semi-transparent image over a base image. The overlay image is stretchable and created like this:
[[UIImage imageNamed:#"overlay.png"] stretchableImageWithLeftCapWidth:5.0 topCapHeight:5.0]
Then I pass that off to a method that overlays it onto the background image for a button:
- (void)overlayImage:(UIImage *)overlay forState:(UIControlState)state {
UIImage *baseImage = [self backgroundImageForState:state];
CGRect frame = CGRectZero;
frame.size = baseImage.size;
// create a new image context
UIGraphicsBeginImageContext(baseImage.size);
// get context
CGContextRef context = UIGraphicsGetCurrentContext();
// clear context
CGContextClearRect(context, frame);
// draw images
[baseImage drawInRect:frame];
[overlay drawInRect:frame];// blendMode:kCGBlendModeNormal alpha:1.0];
// get UIImage
UIImage *overlaidImage = UIGraphicsGetImageFromCurrentImageContext();
// clean up context
UIGraphicsEndImageContext();
[self setBackgroundImage:overlaidImage forState:state];
}
The resulting overlaidImage looks mostly correct, it is the correct size, the alpha is blended correctly, etc. however it has vertical artifacts/noise.
UIImage artifacts example http://acaciatreesoftware.com/img/UIImage-artifacts.png
(example at http://acaciatreesoftware.com/img/UIImage-artifacts.png)
I tried clearing the context first and then turning off PNG compression--which reduces the artifacting some (completely on non stretched images I think).
Does anyone know a method for drawing stretchable UIImages with out this sort of artifacting happening?
So the answer is: Don't do this. Instead you can paint your overlay procedurally. Like so:
- (void)overlayWithColor:(UIColor *)overlayColor forState:(UIControlState)state {
UIImage *baseImage = [self backgroundImageForState:state];
CGRect frame = CGRectZero;
frame.size = baseImage.size;
// create a new image context
UIGraphicsBeginImageContext(baseImage.size);
// get context
CGContextRef context = UIGraphicsGetCurrentContext();
// draw background image
[baseImage drawInRect:frame];
// overlay color
CGContextSetFillColorWithColor(context, [overlayColor CGColor]);
CGContextSetBlendMode(context, kCGBlendModeSourceAtop);
CGContextFillRect(context, frame);
// get UIImage
UIImage *overlaidImage = UIGraphicsGetImageFromCurrentImageContext();
// clean up context
UIGraphicsEndImageContext();
[self setBackgroundImage:overlaidImage forState:state];
}
Are you being too miserly with your original image, and forcing it to stretch rather than shrink? I've found best results out of images that fit the same aspect ratio and were reduced in size. Might not solve your problem tho.
Can anyone guide me in the correct way to build a colored bubble/circle programmatically?
I can't use images as I need it to be able to be any color depending on user interaction.
My thought was maybe to make a white circle image and then overlay a color on top of it.
However I am not sure if this would work, or how to really go about it.
If someone could point me the right direction I would appreciate it.
There are a couple steps to drawing something in Cocoa.
First you need a path that will be used to define the object that you are going to be drawing. Take a look here Drawing Fundamental Shapes for a guide on creating paths in Cocoa. You will be most interested in sending the "appendBezierPathWithOvalInRect" message to an "NSBezierPath" object, this takes a rectangle that bounds the circle you want to draw.
This code will create a 10x10 circle at coordinates 10,10:
NSRect rect = NSMakeRect(10, 10, 10, 10);
NSBezierPath* circlePath = [NSBezierPath bezierPath];
[circlePath appendBezierPathWithOvalInRect: rect];
Once you have your path you want to set the color for the current drawing context. There are two colors, stroke and fill; stroke is the outline of the path and the fill is the interior color. To set a color you send "set" to an "NSColor" object.
This sets the stroke to black and the fill to red:
[[NSColor blackColor] setStroke];
[[NSColor redColor] setFill];
Now that you have your path and you have your colors set just fill the path and then draw it:
[path stroke];
[path fill];
All of this will need to be done in a graphics context like in drawRect of a view perhaps. All of this together with a graphics context would look like this:
- (void)drawRect:(NSRect)rect
{
// Get the graphics context that we are currently executing under
NSGraphicsContext* gc = [NSGraphicsContext currentContext];
// Save the current graphics context settings
[gc saveGraphicsState];
// Set the color in the current graphics context for future draw operations
[[NSColor blackColor] setStroke];
[[NSColor redColor] setFill];
// Create our circle path
NSRect rect = NSMakeRect(10, 10, 10, 10);
NSBezierPath* circlePath = [NSBezierPath bezierPath];
[circlePath appendBezierPathWithOvalInRect: rect];
// Outline and fill the path
[circlePath stroke];
[circlePath fill];
// Restore the context to what it was before we messed with it
[gc restoreGraphicsState];
}
You may use simple UIView to create perfect circle with only parameter radius:
// Add framework CoreGraphics.framework
#import <QuartzCore/QuartzCore.h>
-(UIView *)circleWithColor:(UIColor *)color radius:(int)radius {
UIView *circle = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 2 * radius, 2 * radius)];
circle.backgroundColor = color;
circle.layer.cornerRadius = radius;
circle.layer.masksToBounds = YES;
return circle;
}
Create an NSView subclass that holds an NSColor as an ivar. In the drawRect method, create an NSBezierPath of the appropriate size, using the view's bounds. Then set the color [myColor set] and fill the path [myPath fill]. There's a lot more you can do, such as set transparency, a border, and so on and so on, but I'll leave that to the docs unless you have a specific question.
To use the NSView subclass, just drag a view object onto your nib, and choose the name of your subclass in custom class in IB's inspector. You'll need to also set an outlet to it in your controller, so you can change the color as needed.
CGContextRef c = UIGraphicsGetCurrentContext();
CGContextSetRGBFillColor(c, 40, 0, 255, 0.1);
CGContextSetRGBStrokeColor(c, 0, 40, 255, 0.5);
// Draw a green solid circle
CGContextSetRGBFillColor(c, 0, 255, 0, 1);
CGContextFillEllipseInRect(c, CGRectMake(100, 100, 25, 25));
Download sketch from apple. http://developer.apple.com/library/mac/#samplecode/Sketch
It can do a lot more, but one of the things is draw circles.