Related
I'm trying to create a view where I want a column to be only true or false. However, it seems that no matter what I do, SQL Server (2008) believes my bit column can somehow be null.
I have a table called "Product" with the column "Status" which is INT, NULL. In a view, I want to return a row for each row in Product, with a BIT column set to true if the Product.Status column is equal to 3, otherwise the bit field should be false.
Example SQL
SELECT CAST( CASE ISNULL(Status, 0)
WHEN 3 THEN 1
ELSE 0
END AS bit) AS HasStatus
FROM dbo.Product
If I save this query as a view and look at the columns in Object Explorer, the column HasStatus is set to BIT, NULL. But it should never be NULL. Is there some magic SQL trick I can use to force this column to be NOT NULL.
Notice that, if I remove the CAST() around the CASE, the column is correctly set as NOT NULL, but then the column's type is set to INT, which is not what I want. I want it to be BIT. :-)
You can achieve what you want by re-arranging your query a bit. The trick is that the ISNULL has to be on the outside before SQL Server will understand that the resulting value can never be NULL.
SELECT ISNULL(CAST(
CASE Status
WHEN 3 THEN 1
ELSE 0
END AS bit), 0) AS HasStatus
FROM dbo.Product
One reason I actually find this useful is when using an ORM and you do not want the resulting value mapped to a nullable type. It can make things easier all around if your application sees the value as never possibly being null. Then you don't have to write code to handle null exceptions, etc.
FYI, for people running into this message, adding the ISNULL() around the outside of the cast/convert can mess up the optimizer on your view.
We had 2 tables using the same value as an index key but with types of different numerical precision (bad, I know) and our view was joining on them to produce the final result. But our middleware code was looking for a specific data type, and the view had a CONVERT() around the column returned
I noticed, as the OP did, that the column descriptors of the view result defined it as nullable and I was thinking It's a primary/foreign key on 2 tables; why would we want the result defined as nullable?
I found this post, threw ISNULL() around the column and voila - not nullable anymore.
Problem was the performance of the view went straight down the toilet when a query filtered on that column.
For some reason, an explicit CONVERT() on the view's result column didn't screw up the optimizer (it was going to have to do that anyway because of the different precisions) but adding a redundant ISNULL() wrapper did, in a big way.
All you can do in a Select statement is control the data that the database engine sends to you as a client. The select statement has no effect on the structure of the underlying table. To modify the table structure you need to execute an Alter Table statement.
First make sure that there are currently no nulls in that bit field in the table
Then execute the following ddl statement:
Alter Table dbo.Product Alter column status bit not null
If, otoh, all you are trying to do is control the output of the view, then what you are doing is sufficient. Your syntax will guarantee that the output of the HasStatus column in the views resultset will in fact never be null. It will always be either bit value = 1 or bit value = 0. Don't worry what the object explorer says...
Why would someone use WHERE 1=1 AND <conditions> in a SQL clause (Either SQL obtained through concatenated strings, either view definition)
I've seen somewhere that this would be used to protect against SQL Injection, but it seems very weird.
If there is injection WHERE 1 = 1 AND injected OR 1=1 would have the same result as injected OR 1=1.
Later edit: What about the usage in a view definition?
Thank you for your answers.
Still,
I don't understand why would someone use this construction for defining a view, or use it inside a stored procedure.
Take this for example:
CREATE VIEW vTest AS
SELECT FROM Table WHERE 1=1 AND table.Field=Value
If the list of conditions is not known at compile time and is instead built at run time, you don't have to worry about whether you have one or more than one condition. You can generate them all like:
and <condition>
and concatenate them all together. With the 1=1 at the start, the initial and has something to associate with.
I've never seen this used for any kind of injection protection, as you say it doesn't seem like it would help much. I have seen it used as an implementation convenience. The SQL query engine will end up ignoring the 1=1 so it should have no performance impact.
Just adding a example code to Greg's answer:
dim sqlstmt as new StringBuilder
sqlstmt.add("SELECT * FROM Products")
sqlstmt.add(" WHERE 1=1")
''// From now on you don't have to worry if you must
''// append AND or WHERE because you know the WHERE is there
If ProductCategoryID <> 0 then
sqlstmt.AppendFormat(" AND ProductCategoryID = {0}", trim(ProductCategoryID))
end if
If MinimunPrice > 0 then
sqlstmt.AppendFormat(" AND Price >= {0}", trim(MinimunPrice))
end if
I've seen it used when the number of conditions can be variable.
You can concatenate conditions using an " AND " string. Then, instead of counting the number of conditions you're passing in, you place a "WHERE 1=1" at the end of your stock SQL statement and throw on the concatenated conditions.
Basically, it saves you having to do a test for conditions and then add a "WHERE" string before them.
Seems like a lazy way to always know that your WHERE clause is already defined and allow you to keep adding conditions without having to check if it is the first one.
Indirectly Relevant: when 1=2 is used:
CREATE TABLE New_table_name
as
select *
FROM Old_table_name
WHERE 1 = 2;
this will create a new table with same schema as old table. (Very handy if you want to load some data for compares)
I found this pattern useful when I'm testing or double checking things on the database, so I can very quickly comment other conditions:
CREATE VIEW vTest AS
SELECT FROM Table WHERE 1=1
AND Table.Field=Value
AND Table.IsValid=true
turns into:
CREATE VIEW vTest AS
SELECT FROM Table WHERE 1=1
--AND Table.Field=Value
--AND Table.IsValid=true
1 = 1 expression is commonly used in generated sql code. This expression can simplify sql generating code reducing number of conditional statements.
Actually, I've seen this sort of thing used in BIRT reports. The query passed to the BIRT runtime is of the form:
select a,b,c from t where a = ?
and the '?' is replaced at runtime by an actual parameter value selected from a drop-down box. The choices in the drop-down are given by:
select distinct a from t
union all
select '*' from sysibm.sysdummy1
so that you get all possible values plus "*". If the user selects "*" from the drop down box (meaning all values of a should be selected), the query has to be modified (by Javascript) before being run.
Since the "?" is a positional parameter and MUST remain there for other things to work, the Javascript modifies the query to be:
select a,b,c from t where ((a = ?) or (1==1))
That basically removes the effect of the where clause while still leaving the positional parameter in place.
I've also seen the AND case used by lazy coders whilst dynamically creating an SQL query.
Say you have to dynamically create a query that starts with select * from t and checks:
the name is Bob; and
the salary is > $20,000
some people would add the first with a WHERE and subsequent ones with an AND thus:
select * from t where name = 'Bob' and salary > 20000
Lazy programmers (and that's not necessarily a bad trait) wouldn't distinguish between the added conditions, they'd start with select * from t where 1=1 and just add AND clauses after that.
select * from t where 1=1 and name = 'Bob' and salary > 20000
where 1=0, This is done to check if the table exists. Don't know why 1=1 is used.
While I can see that 1=1 would be useful for generated SQL, a technique I use in PHP is to create an array of clauses and then do
implode (" AND ", $clauses);
thus avoiding the problem of having a leading or trailing AND. Obviously this is only useful if you know that you are going to have at least one clause!
Here's a closely related example: using a SQL MERGE statement to update the target tabled using all values from the source table where there is no common attribute on which to join on e.g.
MERGE INTO Circles
USING
(
SELECT pi
FROM Constants
) AS SourceTable
ON 1 = 1
WHEN MATCHED THEN
UPDATE
SET circumference = 2 * SourceTable.pi * radius;
If you came here searching for WHERE 1, note that WHERE 1 and WHERE 1=1 are identical. WHERE 1 is used rarely because some database systems reject it considering WHERE 1 not really being boolean.
Why would someone use WHERE 1=1 AND <proper conditions>
I've seen homespun frameworks do stuff like this (blush), as this allows lazy parsing practices to be applied to both the WHERE and AND Sql keywords.
For example (I'm using C# as an example here), consider the conditional parsing of the following predicates in a Sql query string builder:
var sqlQuery = "SELECT * FROM FOOS WHERE 1 = 1"
if (shouldFilterForBars)
{
sqlQuery = sqlQuery + " AND Bars > 3";
}
if (shouldFilterForBaz)
{
sqlQuery = sqlQuery + " AND Baz < 12";
}
The "benefit" of WHERE 1 = 1 means that no special code is needed:
For AND - whether zero, one or both predicates (Bars and Baz's) should be applied, which would determine whether the first AND is required. Since we already have at least one predicate with the 1 = 1, it means AND is always OK.
For no predicates at all - In the case where there are ZERO predicates, then the WHERE must be dropped. But again, we can be lazy, because we are again guarantee of at least one predicate.
This is obviously a bad idea and would recommend using an established data access framework or ORM for parsing optional and conditional predicates in this way.
Having review all the answers i decided to perform some experiment like
SELECT
*
FROM MyTable
WHERE 1=1
Then i checked with other numbers
WHERE 2=2
WHERE 10=10
WHERE 99=99
ect
Having done all the checks, the query run town is the same. even without the where clause. I am not a fan of the syntax
This is useful in a case where you have to use dynamic query in which in where
clause you have to append some filter options. Like if you include options 0 for status is inactive, 1 for active. Based from the options, there is only two available options(0 and 1) but if you want to display All records, it is handy to include in where close 1=1.
See below sample:
Declare #SearchValue varchar(8)
Declare #SQLQuery varchar(max) = '
Select [FirstName]
,[LastName]
,[MiddleName]
,[BirthDate]
,Case
when [Status] = 0 then ''Inactive''
when [Status] = 1 then ''Active''
end as [Status]'
Declare #SearchOption nvarchar(100)
If (#SearchValue = 'Active')
Begin
Set #SearchOption = ' Where a.[Status] = 1'
End
If (#SearchValue = 'Inactive')
Begin
Set #SearchOption = ' Where a.[Status] = 0'
End
If (#SearchValue = 'All')
Begin
Set #SearchOption = ' Where 1=1'
End
Set #SQLQuery = #SQLQuery + #SearchOption
Exec(#SQLQuery);
Saw this in production code and asked seniors for help.
Their answer:
-We use 1=1 so when we have to add a new condition we can just type
and <condition>
and get on with it.
I do this usually when I am building dynamic SQL for a report which has many dropdown values a user can select. Since the user may or may not select the values from each dropdown, we end up getting a hard time figuring out which condition was the first where clause. So we pad up the query with a where 1=1 in the end and add all where clauses after that.
Something like
select column1, column2 from my table where 1=1 {name} {age};
Then we would build the where clause like this and pass it as a parameter value
string name_whereClause= ddlName.SelectedIndex > 0 ? "AND name ='"+ ddlName.SelectedValue+ "'" : "";
As the where clause selection are unknown to us at runtime, so this helps us a great deal in finding whether to include an 'AND' or 'WHERE'.
Making "where 1=1" the standard for all your queries also makes it trivially easy to validate the sql by replacing it with where 1 = 0, handy when you have batches of commands/files.
Also makes it trivially easy to find the end of the end of the from/join section of any query. Even queries with sub-queries if properly indented.
I first came across this back with ADO and classic asp, the answer i got was: performance.
if you do a straight
Select * from tablename
and pass that in as an sql command/text you will get a noticeable performance increase with the
Where 1=1
added, it was a visible difference. something to do with table headers being returned as soon as the first condition is met, or some other craziness, anyway, it did speed things up.
Using a predicate like 1=1 is a normal hint sometimes used to force the access plan to use or not use an index scan. The reason why this is used is when you are using a multi-nested joined query with many predicates in the where clause where sometimes even using all of the indexes causes the access plan to read each table - a full table scan. This is just 1 of many hints used by DBAs to trick a dbms into using a more efficient path. Just don't throw one in; you need a dba to analyze the query since it doesn't always work.
Here is a use case... however I am not too concerned with the technicalities of why I should or not use 1 = 1.
I am writing a function, using pyodbc to retrieve some data from SQL Server. I was looking for a way to force a filler after the where keyword in my code. This was a great suggestion indeed:
if _where == '': _where = '1=1'
...
...
...
cur.execute(f'select {predicate} from {table_name} where {_where}')
The reason is because I could not implement the keyword 'where' together inside the _where clause variable. So, I think using any dummy condition that evaluates to true would do as a filler.
Why would someone use WHERE 1=1 AND <conditions> in a SQL clause (Either SQL obtained through concatenated strings, either view definition)
I've seen somewhere that this would be used to protect against SQL Injection, but it seems very weird.
If there is injection WHERE 1 = 1 AND injected OR 1=1 would have the same result as injected OR 1=1.
Later edit: What about the usage in a view definition?
Thank you for your answers.
Still,
I don't understand why would someone use this construction for defining a view, or use it inside a stored procedure.
Take this for example:
CREATE VIEW vTest AS
SELECT FROM Table WHERE 1=1 AND table.Field=Value
If the list of conditions is not known at compile time and is instead built at run time, you don't have to worry about whether you have one or more than one condition. You can generate them all like:
and <condition>
and concatenate them all together. With the 1=1 at the start, the initial and has something to associate with.
I've never seen this used for any kind of injection protection, as you say it doesn't seem like it would help much. I have seen it used as an implementation convenience. The SQL query engine will end up ignoring the 1=1 so it should have no performance impact.
Just adding a example code to Greg's answer:
dim sqlstmt as new StringBuilder
sqlstmt.add("SELECT * FROM Products")
sqlstmt.add(" WHERE 1=1")
''// From now on you don't have to worry if you must
''// append AND or WHERE because you know the WHERE is there
If ProductCategoryID <> 0 then
sqlstmt.AppendFormat(" AND ProductCategoryID = {0}", trim(ProductCategoryID))
end if
If MinimunPrice > 0 then
sqlstmt.AppendFormat(" AND Price >= {0}", trim(MinimunPrice))
end if
I've seen it used when the number of conditions can be variable.
You can concatenate conditions using an " AND " string. Then, instead of counting the number of conditions you're passing in, you place a "WHERE 1=1" at the end of your stock SQL statement and throw on the concatenated conditions.
Basically, it saves you having to do a test for conditions and then add a "WHERE" string before them.
Seems like a lazy way to always know that your WHERE clause is already defined and allow you to keep adding conditions without having to check if it is the first one.
Indirectly Relevant: when 1=2 is used:
CREATE TABLE New_table_name
as
select *
FROM Old_table_name
WHERE 1 = 2;
this will create a new table with same schema as old table. (Very handy if you want to load some data for compares)
I found this pattern useful when I'm testing or double checking things on the database, so I can very quickly comment other conditions:
CREATE VIEW vTest AS
SELECT FROM Table WHERE 1=1
AND Table.Field=Value
AND Table.IsValid=true
turns into:
CREATE VIEW vTest AS
SELECT FROM Table WHERE 1=1
--AND Table.Field=Value
--AND Table.IsValid=true
1 = 1 expression is commonly used in generated sql code. This expression can simplify sql generating code reducing number of conditional statements.
Actually, I've seen this sort of thing used in BIRT reports. The query passed to the BIRT runtime is of the form:
select a,b,c from t where a = ?
and the '?' is replaced at runtime by an actual parameter value selected from a drop-down box. The choices in the drop-down are given by:
select distinct a from t
union all
select '*' from sysibm.sysdummy1
so that you get all possible values plus "*". If the user selects "*" from the drop down box (meaning all values of a should be selected), the query has to be modified (by Javascript) before being run.
Since the "?" is a positional parameter and MUST remain there for other things to work, the Javascript modifies the query to be:
select a,b,c from t where ((a = ?) or (1==1))
That basically removes the effect of the where clause while still leaving the positional parameter in place.
I've also seen the AND case used by lazy coders whilst dynamically creating an SQL query.
Say you have to dynamically create a query that starts with select * from t and checks:
the name is Bob; and
the salary is > $20,000
some people would add the first with a WHERE and subsequent ones with an AND thus:
select * from t where name = 'Bob' and salary > 20000
Lazy programmers (and that's not necessarily a bad trait) wouldn't distinguish between the added conditions, they'd start with select * from t where 1=1 and just add AND clauses after that.
select * from t where 1=1 and name = 'Bob' and salary > 20000
where 1=0, This is done to check if the table exists. Don't know why 1=1 is used.
While I can see that 1=1 would be useful for generated SQL, a technique I use in PHP is to create an array of clauses and then do
implode (" AND ", $clauses);
thus avoiding the problem of having a leading or trailing AND. Obviously this is only useful if you know that you are going to have at least one clause!
Here's a closely related example: using a SQL MERGE statement to update the target tabled using all values from the source table where there is no common attribute on which to join on e.g.
MERGE INTO Circles
USING
(
SELECT pi
FROM Constants
) AS SourceTable
ON 1 = 1
WHEN MATCHED THEN
UPDATE
SET circumference = 2 * SourceTable.pi * radius;
If you came here searching for WHERE 1, note that WHERE 1 and WHERE 1=1 are identical. WHERE 1 is used rarely because some database systems reject it considering WHERE 1 not really being boolean.
Why would someone use WHERE 1=1 AND <proper conditions>
I've seen homespun frameworks do stuff like this (blush), as this allows lazy parsing practices to be applied to both the WHERE and AND Sql keywords.
For example (I'm using C# as an example here), consider the conditional parsing of the following predicates in a Sql query string builder:
var sqlQuery = "SELECT * FROM FOOS WHERE 1 = 1"
if (shouldFilterForBars)
{
sqlQuery = sqlQuery + " AND Bars > 3";
}
if (shouldFilterForBaz)
{
sqlQuery = sqlQuery + " AND Baz < 12";
}
The "benefit" of WHERE 1 = 1 means that no special code is needed:
For AND - whether zero, one or both predicates (Bars and Baz's) should be applied, which would determine whether the first AND is required. Since we already have at least one predicate with the 1 = 1, it means AND is always OK.
For no predicates at all - In the case where there are ZERO predicates, then the WHERE must be dropped. But again, we can be lazy, because we are again guarantee of at least one predicate.
This is obviously a bad idea and would recommend using an established data access framework or ORM for parsing optional and conditional predicates in this way.
Having review all the answers i decided to perform some experiment like
SELECT
*
FROM MyTable
WHERE 1=1
Then i checked with other numbers
WHERE 2=2
WHERE 10=10
WHERE 99=99
ect
Having done all the checks, the query run town is the same. even without the where clause. I am not a fan of the syntax
This is useful in a case where you have to use dynamic query in which in where
clause you have to append some filter options. Like if you include options 0 for status is inactive, 1 for active. Based from the options, there is only two available options(0 and 1) but if you want to display All records, it is handy to include in where close 1=1.
See below sample:
Declare #SearchValue varchar(8)
Declare #SQLQuery varchar(max) = '
Select [FirstName]
,[LastName]
,[MiddleName]
,[BirthDate]
,Case
when [Status] = 0 then ''Inactive''
when [Status] = 1 then ''Active''
end as [Status]'
Declare #SearchOption nvarchar(100)
If (#SearchValue = 'Active')
Begin
Set #SearchOption = ' Where a.[Status] = 1'
End
If (#SearchValue = 'Inactive')
Begin
Set #SearchOption = ' Where a.[Status] = 0'
End
If (#SearchValue = 'All')
Begin
Set #SearchOption = ' Where 1=1'
End
Set #SQLQuery = #SQLQuery + #SearchOption
Exec(#SQLQuery);
Saw this in production code and asked seniors for help.
Their answer:
-We use 1=1 so when we have to add a new condition we can just type
and <condition>
and get on with it.
I do this usually when I am building dynamic SQL for a report which has many dropdown values a user can select. Since the user may or may not select the values from each dropdown, we end up getting a hard time figuring out which condition was the first where clause. So we pad up the query with a where 1=1 in the end and add all where clauses after that.
Something like
select column1, column2 from my table where 1=1 {name} {age};
Then we would build the where clause like this and pass it as a parameter value
string name_whereClause= ddlName.SelectedIndex > 0 ? "AND name ='"+ ddlName.SelectedValue+ "'" : "";
As the where clause selection are unknown to us at runtime, so this helps us a great deal in finding whether to include an 'AND' or 'WHERE'.
Making "where 1=1" the standard for all your queries also makes it trivially easy to validate the sql by replacing it with where 1 = 0, handy when you have batches of commands/files.
Also makes it trivially easy to find the end of the end of the from/join section of any query. Even queries with sub-queries if properly indented.
I first came across this back with ADO and classic asp, the answer i got was: performance.
if you do a straight
Select * from tablename
and pass that in as an sql command/text you will get a noticeable performance increase with the
Where 1=1
added, it was a visible difference. something to do with table headers being returned as soon as the first condition is met, or some other craziness, anyway, it did speed things up.
Using a predicate like 1=1 is a normal hint sometimes used to force the access plan to use or not use an index scan. The reason why this is used is when you are using a multi-nested joined query with many predicates in the where clause where sometimes even using all of the indexes causes the access plan to read each table - a full table scan. This is just 1 of many hints used by DBAs to trick a dbms into using a more efficient path. Just don't throw one in; you need a dba to analyze the query since it doesn't always work.
Here is a use case... however I am not too concerned with the technicalities of why I should or not use 1 = 1.
I am writing a function, using pyodbc to retrieve some data from SQL Server. I was looking for a way to force a filler after the where keyword in my code. This was a great suggestion indeed:
if _where == '': _where = '1=1'
...
...
...
cur.execute(f'select {predicate} from {table_name} where {_where}')
The reason is because I could not implement the keyword 'where' together inside the _where clause variable. So, I think using any dummy condition that evaluates to true would do as a filler.
We have a stored procedure that takes in a few parameters, but only one of these parameters has a value and that is used to filter the result set. The SELECT statement itself contains multiple joins and is somewhat long.
To avoid copy-pasting the query multiple times, I want to be able to use an IF or CASE statement in the WHERE clause. The problem is, we are using full-text index and the CONTAINS statement, and I'm not quite sure how to inject an IF or CASE statement inside/outside the CONTAINS clause, something like this:
SELECT * FROM [QUERY]
WHERE(
IF #Filter1 IS NOT NULL
BEGIN
CONTAINS(SomeColumn, #Filter1)
END
ELSE IF #Filter2 IS NOT NULL
BEGIN
CONTAINS(AnotherColumn, #Filter2)
END)
which obviously doesn't work. I can't put the SELECT query in a view or function either because the result set currently doesn't specify a unique index key, i.e. cannot be full-text indexed (right now tables are full-text indexed individually to address this issue).
So is there a way to achieve this? I could potentially copy-pase the long SELECT query inside different IF statement for each filter, but that gets very ugly. Any help is appreciated.
Maybe I'm overlooking something, but couldn't you structure the WHERE as follows...
WHERE ((#Filter1 IS NOT NULL) AND CONTAINS(..)) OR ((#Filter2 IS NOT NULL) AND CONTAINS(..))
That's how we do it for a similar scenario.
I'm trying to create a view where I want a column to be only true or false. However, it seems that no matter what I do, SQL Server (2008) believes my bit column can somehow be null.
I have a table called "Product" with the column "Status" which is INT, NULL. In a view, I want to return a row for each row in Product, with a BIT column set to true if the Product.Status column is equal to 3, otherwise the bit field should be false.
Example SQL
SELECT CAST( CASE ISNULL(Status, 0)
WHEN 3 THEN 1
ELSE 0
END AS bit) AS HasStatus
FROM dbo.Product
If I save this query as a view and look at the columns in Object Explorer, the column HasStatus is set to BIT, NULL. But it should never be NULL. Is there some magic SQL trick I can use to force this column to be NOT NULL.
Notice that, if I remove the CAST() around the CASE, the column is correctly set as NOT NULL, but then the column's type is set to INT, which is not what I want. I want it to be BIT. :-)
You can achieve what you want by re-arranging your query a bit. The trick is that the ISNULL has to be on the outside before SQL Server will understand that the resulting value can never be NULL.
SELECT ISNULL(CAST(
CASE Status
WHEN 3 THEN 1
ELSE 0
END AS bit), 0) AS HasStatus
FROM dbo.Product
One reason I actually find this useful is when using an ORM and you do not want the resulting value mapped to a nullable type. It can make things easier all around if your application sees the value as never possibly being null. Then you don't have to write code to handle null exceptions, etc.
FYI, for people running into this message, adding the ISNULL() around the outside of the cast/convert can mess up the optimizer on your view.
We had 2 tables using the same value as an index key but with types of different numerical precision (bad, I know) and our view was joining on them to produce the final result. But our middleware code was looking for a specific data type, and the view had a CONVERT() around the column returned
I noticed, as the OP did, that the column descriptors of the view result defined it as nullable and I was thinking It's a primary/foreign key on 2 tables; why would we want the result defined as nullable?
I found this post, threw ISNULL() around the column and voila - not nullable anymore.
Problem was the performance of the view went straight down the toilet when a query filtered on that column.
For some reason, an explicit CONVERT() on the view's result column didn't screw up the optimizer (it was going to have to do that anyway because of the different precisions) but adding a redundant ISNULL() wrapper did, in a big way.
All you can do in a Select statement is control the data that the database engine sends to you as a client. The select statement has no effect on the structure of the underlying table. To modify the table structure you need to execute an Alter Table statement.
First make sure that there are currently no nulls in that bit field in the table
Then execute the following ddl statement:
Alter Table dbo.Product Alter column status bit not null
If, otoh, all you are trying to do is control the output of the view, then what you are doing is sufficient. Your syntax will guarantee that the output of the HasStatus column in the views resultset will in fact never be null. It will always be either bit value = 1 or bit value = 0. Don't worry what the object explorer says...