I installed Microsoft SQL Server 2005 Express edition on my Vista Ultimate computer. However, when it opens I enter my computer name / SQLEXPRESS. When I click the Connect button, it gives me an error message.
Under the configuration tools I cannot find the SQL Server Surface Area Configuration. It only has SQL Server Error and Usage Reporting.
The error message I receive when I click the Connect button is:
A network related or instance specific error occurred while establsihing a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that the SQL server is confugured to allow remote connection (provider: Named Pipes Provider, error 40- Could not open a connection to SQL Server) (Microsoft SQL Server : error 67)
From your question, as you'd written, it appears the slash is incorrect. Try:
.\SQLEXPRESS
Also ensure that your SQL Server services are started. Run services.msc and find SQL Server(SQLExpress).
Another thing to check for is the account that the SQL Express service is running under. I think it defaults to network service, but I typically run it under Local System (or if you're feeling ambitious, make a service account for it). This has taken care of a handful of permission issues I've had with SQL Express in the past.
Related
I am using Windows-server-2008 with Microsoft SQL Server 2008.
And there are a lot of questions about this, but nothing on the internet solved it.
The problem is that i can't connect to the my SQL Server 2008 R2 after rebooting my server.
I placed some new memory in my server, and after rebooting my client/server application didn't work anymore because it cannot reach the database.
So i tried to get in SQL Server Management Studio (SSMS), and tried to loggin with Administrator and another user but both do not work.
When i logg in the following message is displayed:
Cannot connect to (local)
A network-related or instance-specific error occurred while establishing a connection
to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
(Microsoft SQL Server, Error: 2)
I Tried a lot of different things like:
Rebooting server
Try to start the server manually from Sql Server Configuration Manager
Named Pipes - Enabled
TCP/IP - Enabled
Tried to create an new system user or database user as described in the following article: Click Here
Can somebody please help me? I am really confused because i need to get this online. Otherwise i have to reinstall the database server but i do not have a back-up. (is there some folder with a back-up of the settings/tables/columns are stored and can be imported from reinstall?
I was having the exact same problem. net start mssqlserver was giving me the blurb about a failed login attempt. The problem was that I had recently changed the password for the administrator account, and the new password didn't get updated in services.
Here's how I fixed it:
First locate SQL Server from the list here:
Right click and select properties, and navigate to the Log On tab:
Then I typed the new password, and like magic I was able to start SQL Server right through the services manager.
I also did this for any other processes which were marked as "stopped" even though Startup Type was marked as "automatic" (namely, SQL Server Agent).
Is it a named instance or default? Also, is this a local instance? (I see the "(local)" but just wanted to make sure.)
Start the sql server services from services.msc and try to connect
I might be the million'th person posting about this, but others' solutions haven't helped me. I have a database on Microsoft SQL Azure. I an trying to connect to it using the Visual Studio 2010's "Connect to Database" Tool.
From my Windows 7 machine, I can connect to it very easily. But from my Windows Server 2008R2 machine i am getting the classic error -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
All the posts around the web seem to be focussing on the problems on the server side, no one cares if the client goes rogue. :(
Thanks for the replies.
I have seen similar problems with VS2010 DB Tool and Windows Server so I would not suggest try using SSMS 2008 R2 (must be R2). Once you have download SSMS 2008 R2 and configured properly to work on Windows Server it sure will work. In most of the case you really need to open SSMS settings to get it workon on Windows Server.
Next a few points to check:
Verify that the telnet is working from your Windows Server Machine:
c:>telnet _your_sqlazure_database_name.database.windows.net 1433
Disable your real time security and the try again
Finally following the link to keep applying settings in your Windows Server and SSMS which are applicable and I am sure it will work:
http://www.mssqltips.com/sqlservertip/2340/resolving-could-not-open-a-connection-to-sql-server-errors/
One issue is that you need to connect via tcp, not named pipes (per your error message).
Are both servers behind the same firewall (e.g. the same external IP address)? The SQL Azure firewall needs to be configured to allow access from remote IP addresses.
I just installed SQL Server 2005 SP2 on Vista and am attempting to connect to my object explorer in Management Studio. When doing so I get the following error:
Cannot connect to localhost.
A network-related or instance-specific
error occurred while establishing a
connection to SQL Server. The server
was not found or was not accessible.
Verify that the instance name is
correct and that SQL Server is
configured to allow remote
connections. (provider: Named Pipes
Provider, error: 40 - Could not open a
connection to SQL Server) (Microsoft
SQL Server, Error: 2)
I am using the following credentials:
Server type: Database Engine; Server name: localhost; Authentication: Windows Authentication
I am just using SQL Server for a local application. I have tried using 127.0.0.1, my comp name, "." and localhost. I have searched and tried every relevant help topic I could find. I have reinstalled, turned on IIS (just a guess), updated to latest service packs all around, run as admin, etc.
What am I missing here?
JJ
Did you run the User Provisioning Tool for Vista? See KB929907 You may be unable to perform most database operations after you log on to an instance of SQL Server 2005 Express Edition Service Pack 1 on a Windows Vista-based computer
Try using (local)
Also if you have an instance name you can try myComputerName\instanceName
You're missing the instance name. You don't just connect to localhost, but to any of the following (assuming that your machine is called dago and your instance sqlexpress):
localhost\sqlexpress
dago\sqlexpress
.\sqlexpress
I am not using express. It turns out I had a "client" version of SQL Server installed. I didn't even know there was a client version. I ran the full install and added the sa user as Windows Authentication wasn't working for me (next goal). I am connecting via "localhost" (just localhost), so I don't fully understand what the instance suggestion was all about.
Basically the solution was to get the full version installed. My bad. Easy fix.
JJ
I've just started work on a new computer in which I had to download all the software fresh.
I've just download a copy of SQL Server 2008 R2, and I'm trying to connect to SQL Server Management Studio without success. I vaguely remember last time I installed this, it asked me to choose between windows, or sql server authentication, however this didn't happen for this installation.
If I try to login via Windows Authentication (where the username and password fields are greyed out, localhost as server name) it gives the following error:
"A Network-related or instance
specific error occured while
establishing a connection to SQL
Server. The server was not found or
was not accessible. Verify that the
instance name is correct and that SQL
Server is configured to allow remote
connections. (provider: Named Pipes
Provider, error: 40 - Could not open a
connection to SQL Server) (Microsoft
SQL Server, Error: 2)"
I have checked everything in SQL Server Configuration Manager, and everything bar VIA is enabled.
If I try SQL Server Authentication, It asks me for a username and password which I definiately have not set yet. Also, under SQL Server Services in configuration manager, there is nothing there.
Any help would be appreciated :)
Thanks
PS: I don't know if it's worth mentioning but I am running Windows 7 as a virtual machine on a Mac.
Are you sure you have the correct instance name? If it was SQL Server 2008 R2 Express Edition then the default instance name is .\SQLEXPRESS.
Also if your using sql authentication to connect try running sql management studio as admin, if you are a limited user your identity might not be mapped to an account in sql server yet but i believe the Administrators user group is.
You need to check if your services are running.
Please type
net start mssqlserver
in your command prompt. Then try to login.
Ended up reinstalling completely and doing a fresh install from a fresh download. When I did this I was brought through the steps of selecting the default instance, and selecting authentication modes.
Working fine now :)
After checking tons of sites looking for an answer to this question, I think I have a simple solution.
Open the sql Server Configuration
Click on the sql server services node
Right Click on Sql server
Click Start.
I have been screwing around with this forever, and this simple method actually worked.
I have SQL server 2008 and it was working fine ,but today while starting SQL server I am getting the following error :
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)"
In SQL Server Configuration Manager--> sql server services --> MS sql server and all other service status is showing as stopped(previously it was running). I have tried to make it start but the request failed..I have checked the event log ,its showing "The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure" ....My SQL server is taking windows authentication and few days back I have changed the PWD ..can it b the reason..pls help.
Note: Its not remote connection..the server is My system only..
Thanks Stuart for ur suggestions but the problem was a bit different.
I got the sloution from http://dotnet.org.za/thea/archive/2004/06/09/2069.aspx
Its working Now :-)
In server properties in security, check that server authentication is set to
SQL SErver and Windows Authentication mode.
EDIT: I had similar error after installation of service pack, the install switched the server authentication mode to windows only.
1.Management Studio
2.Object browser should be open in the left hand pane
3.Right click on the server instance name
4.Select properties from the menu choices
5.Server Properties dialog opens
6.Select security on the left hand menu items
7.On the right, there will be server authentication, select 'SQL Server and Windows Authentication Mode'
This should allow you to log in as sa, once running and you are in, make changes if required to Logins and Roles