Can you set TTBR (Time To Be Received) on a message sent using NServiceBus?
Absolutely - put the TimeToBeReceived attribute on the relevant message class. Here's an example setting it to 10 minutes:
[TimeToBeReceived("00:10:00")]
Related
I want to use the Message Header ID generated in Queue 1 to Queue 2.
Can you please tell me how to achieve this in ActiveMQ?
Scenario:
Queue 1 message was not processed by ESB bus due to some failure
We will be using Queue 2 to post the message again after fixing it with
the same Message Header ID created in Queue 1
Queue 1 (Process):
Message Header ID : ID:XYZ-1234-1555664319032-4:2:1:1:1
Queue 2 (Re-process):
Message Header ID : ID:XYZ-1234-1555664319032-4:2:1:1:1
Many Thanks,
Samuel
ActiveMQ itself assigns the message IDs. It's not something which can be done from a client application. You'll need to use a different message header or property for your application-specific ID.
I am not completely sure of the meaning or the interplay between slowClientQueueLimit and messageQueueLimit.
As per the documentation, they both should ideally be set to the same value, https://ignite.apache.org/releases/2.4.0/javadoc/org/apache/ignite/spi/communication/tcp/TcpCommunicationSpi.html#setSlowClientQueueLimit-int-
However when i do set that i see this in the logs, is it a minor bug in the check or should i change this?
[WARN ] 2018-06-27 22:32:18.429 [main] org.apache.ignite.spi.communication.tcp.TcpCommunicationSpi - Slow client queue limit is set to a value greater than message queue limit (slow client queue limit will have no effect) [msgQueueLimit=1024, slowClientQueueLimit=1024]
Thanks
From code the warning is correct, but javadoc is not. slowClientQueueLimit has to be less than msgQueueLimit, because when message is being prepared to sending, first are checked back pressure limits, and only then slowClientQueueLimit. If these two numbers are equal, sender thread will be blocked by back pressure before it could go to slow client check. What means client would not be dropped.
Set slowClientQueueLimit to msgQueueLimit - 1 or less, and I'll suggest community to fix the docs.
I have an application with RabbitMQ where I get the number of messages in a Rabbit queue using the HTTP API (/api/queues/vhost/name).
However, it appears that this information is refreshed from time to time (by default every 5 seconds). I thought the information was always up to date, and it was the administration page that was updated in a given interval.
Is there any way to get the number of messages in a queue with real-time information?
Thank you
The management database is updated each 5 seconds by default.
use the command line rabbitmqctl list_queues for real-time values.
Try to use:
channel.messageCount(you_queue)
see if it works for you
/**
* Returns the number of messages in a queue ready to be delivered
* to consumers. This method assumes the queue exists. If it doesn't,
* an exception will be closed with an exception.
* #param queue the name of the queue
* #return the number of messages in ready state
* #throws IOException Problem transmitting method.
*/
long messageCount(String queue) throws IOException;
I need to set message priority so that High priority messages are consumed before Low priority messages by Receivers.
First I tried with message.setJMSPriority() method to set the priority but it was not working in HornetQ and ActiveMQ so finally I set the priority of the Message Producer using setPriority() method and it works fine now.
Why isn't Messsge.setJMSPriority() working in any of the JMS vendor implementations and why do we need to set the priority of the Producer not the message itself to set the priority of the message? What is the use of Messsge.setJMSPriority() method then?
Any suggestion or comment is appreciated.
To answer this question all you need to do is read the API docs for the setJMSPriority method and it tells you why. Here's the relevant text.
Sets the priority level for this message.
JMS providers set this field when a message is sent. This method can be used to change the value for a message that has been received.
The JMS Provider (ActiveMQ, HornetMQ, etc) set the priority in the producer on send to either the default value of 4, or to whatever value you've set the producer to use, so setting the value before send on the message itself won't have any effect.
The following will not work:
msg.setJMSPriority(9); // Not working!
In this code, the message priority is set to 9, indicating this is a high-priority message.
However, when the message is sent, the message will have a priority of 4 (normal
priority). The reason? Like the message expiration, the JMS provider will look at the
message priority property on the sender, or on the send(..) invocation, and then invoke the setJMSPriority on the message method prior
to placing the message on the queue. Since the default message priority is 4 (normal
priority), the message priority will not be set to a high priority message, as the developer had originally intended.
Like the message expiration, there are two ways of setting the message priority: you
can invoke the setPriority() method on the MessageProducer (QueueSender or Topic
Publisher) or set the message priority when sending the message:
//set the default message priority for all messages to 9 (high)
QueueSender qSender = qSession.createSender(requestQ);
qSender.setPriority(9);
qSender.send(msg1);
//this message is low priority
qSender.send(msg2, DeliveryMode.PERSISTENT, 1, 30000);
In this example, msg1 will be sent with a priority of 9 (high priority), whereas msg2 will
be sent with a priority of 1 (low priority).
This is a JMS Specification requirement.
You should change the priority on the Message Producer.
You can read JmsTemplate http://static.springsource.org/spring/docs/3.0.6.RELEASE/spring-framework-reference/html/jms.html
Some JMS providers allow the setting of default QOS values administratively through the configuration of the ConnectionFactory.
Check isExplicitQosEnabled property.
In beanstalkd
telnet localhost 11300
USING foo
put 0 100 120 5
hello
INSERTED 1
How can I know what is the priority of this job when I reserve it? And can I release it by making the new priority equals to current priority +100?
Beanstalkd doesn't return the priority with the data - but you could easily add it as metadata in your own message body. for example, with Json as a message wrapper:
{'priority':100,'timestamp':1302642381,'job':'download http://example.com/'}
The next message that will be reserved will be the next available entry from the selected tubes, according to priority and time - subject to any delay that you had requested when you originally sent the message to the queue.
Addition: You can get the priority of a beanstalk job (as well as a number of other pieces of information, such as how many times it has previously been reserved), but it's an additional call - to the stats-job command. Called with the jobId, it returns about a dozen different pieces of information. See the protocol document, and your libraries docs.