What advantage is there, if any, to using Modules rather than classes in VB? How do they differ, and what advantages/disadvantages are there in using modules? In VB or VB.NET, I use both.
(A) Modules
and
(B) Classes with only Shared functions
solve the same problem: Both allow you to logically group a set of functions.
Advantages of using a module:
It allows you to define extension methods.
For someone reading your code, it is immediately obvious that this is not a class representing a group of stateful objects but just a "function container".
Advantages of using a class with shared functions:
It's easy to extend it with instance (= non-shared) variables, functions and properties later on.
So, if you are writing a set of helper functions and want to logically group them (where the concept of a state of this group just doesn't make sense), use a module -- this is exactly what they are here for. On the other hand, if you have a function that conceptually fits to an already existing class, add it as a shared function to that class.
A major difference is that methods in modules can be called globally whereas methods in classes can't. So instead of ModuleName.MyMethod() you can just call MyMethod(). Whether that is an advantage or disadvantage depends on the circumstances.
Module are come earlier and now VB.NET just let it for backward compatibility. Modules and Class are nearly same. You can call Module.Function() directly as it treat as Shared Function in a class. Class you can define Shared Function/Method and additionally can create an instance like Dim c as Class = New Class().
Avoid use of Module, instead use Class. it is good for you to write a better OOP programming.
Related
I see some usages of Extension functions in Kotlin I don't personally think that makes sense, but it seems that there are some guidelines that "apparently" support it (a matter of interpretation).
Specifically: defining an extension function outside a class (but in the same file):
data class AddressDTO(val state: State,
val zipCode: String,
val city: String,
val streetAddress: String
)
fun AddressDTO.asXyzFormat() = "${streetAddress}\n${city}\n${state.name} $zipCode"
Where the asXyzFormat() is widely used, and cannot be defined as private/internal (but also for the cases it may be).
In my common sense, if you own the code (AddressDTO) and the usage is not local to some class / module (hence behing private/internal) - there is no reason to define an extension function - just define it as a member function of that class.
Edge case: if you want to avoid serialization of the function starting with get - annotate the class to get the desired behavior (e.g. #JsonIgnore on the function). This IMHO still doesn't justify an extension function.
The counter-response I got to this is that the approach of having an extension function of this fashion is supported by the Official Kotlin Coding Conventions. Specifically:
Use extension functions liberally. Every time you have a function that works primarily on an object, consider making it an extension function accepting that object as a receiver.
Source
And:
In particular, when defining extension functions for a class which are relevant for all clients of this class, put them in the same file where the class itself is defined. When defining extension functions that make sense only for a specific client, put them next to the code of that client. Do not create files just to hold "all extensions of Foo".
Source
I'll appreciate any commonly accepted source/reference explaining why it makes more sense to move the function to be a member of the class and/or pragmatic arguments support this separation.
That quote about using extension functions liberally, I'm pretty sure means use them liberally as opposed to top level non-extension functions (not as opposed to making it a member function). It's saying that if a top-level function conceptually works on a target object, prefer the extension function form.
I've searched before for the answer to why you might choose to make a function an extension function instead of a member function when working on a class you own the source code for, and have never found a canonical answer from JetBrains. Here are some reasons I think you might, but some are highly subject to opinion.
Sometimes you want a function that operates on a class with a specific generic type. Think of List<Int>.sum(), which is only available to a subset of Lists, but not a subtype of List.
Interfaces can be thought of as contracts. Functions that do something to an interface may make more sense conceptually since they are not part of the contract. I think this is the rationale for most of the standard library extension functions for Iterable and Sequence. A similar rationale might apply to a data class, if you think of a data class almost like a passive struct.
Extension functions afford the possibility of allowing users to pseudo-override them, but forcing them to do it in an independent way. Suppose your asXyzFormat() were an open member function. In some other module, you receive AddressDTO instances and want to get the XYZ format of them, exactly in the format you expect. But the AddressDTO you receive might have overridden asXyzFormat() and provide you something unexpected, so now you can't trust the function. If you use an extension function, than you allow users to replace asXyzFormat() in their own packages with something applicable to that space, but you can always trust the function asXyzFormat() in the source package.
Similarly for interfaces, a member function with default implementation invites users to override it. As the author of the interface, you may want a reliable function you can use on that interface with expected behavior. Although the end-user can hide your extension in their own module by overloading it, that will have no effect on your own uses of the function.
For what it's worth, I think it would be very rare to choose to make an extension function for a class (not an interface) when you own the source code for it. And I can't think of any examples of that in the standard library. Which leads me to believe that the Coding Conventions document is using the word "class" in a liberal sense that includes interfaces.
Here's a reverse argument…
One of the main reasons for adding extension functions to the language is being able to add functionality to classes from the standard library, and from third-party libraries and other dependencies where you don't control the code and can't add member functions (AKA methods). I suspect it's mainly those cases that that section of the coding conventions is talking about.
In Java, the only option in this cases is utility methods: static methods, usually in a utility class gathering together lots of such methods, each taking the relevant object as its first parameter:
public static String[] splitOnChar(String str, char separator)
public static boolean isAllDigits(String str)
…and so on, interminably.
The main problem there is that such methods are hard to find (no help from the IDE unless you already know about all the various utility classes). Also, calling them is long-winded (though it improved a bit once static imports were available).
Kotlin's extension methods are implemented exactly the same way down at the bytecode level, but their syntax is much simpler and exactly like member functions: they're written the same way (with this &c), calling them looks just like calling a member function, and your IDE will suggest them.
(Of course, they have drawbacks, too: no dynamic dispatch, no inheritance or overriding, scoping/import issues, name clashes, references to them are awkward, accessing them from Java or reflection is awkward, and so on.)
So: if the main purpose of extension functions is to substitute for member functions when member functions aren't possible, why would you use them when member functions are possible?!
(To be fair, there are a few reasons why you might want them. For example, you can make the receiver nullable, which isn't possible with member functions. But in most cases, they're greatly outweighed by the benefits of a proper member function.)
This means that the vast majority of extension functions are likely to be written for classes that you don't control the source code for, and so you don't have the option of putting them next to the class.
Some of my co-workers make extensive use of the VB.net concept of Modules. Unfortunately, I just don't 'get it'. I see no benefit in using modules over shared classes. Am I missing something? When would it be preferable to use a module? Or am I (as I do quite often in this language) 'just not getting it'?
In VB.net a module is a shared class. When they are compiled they are given a private constructor and methods set to shared.
There are some times when you are forced to use modules by the compiler (in the same way static classes are in C#) such as for extension methods which can not be created in side a VB.Net class.
By using modules for your helper methods you will make it easier to convert them over to extension methods later and restrict others from adding any instance methods or constructors.
That said they are a hang over from VB6 that did not support full OO programming and beyond standalone helper methods they would not widely be used.
A module is essentially the same as a shared class. The major difference is that in a module, there's no need for all the extra "shared"s, cause everything's implicitly shared. If you have no instance data and are just using the class as a kind of namespace for functions, then it's a better idea (IMO) to use a module instead and make that clear.
This question already has answers here:
What is reflection and why is it useful?
(23 answers)
Closed 6 years ago.
I was just curious, why should we use reflection in the first place?
// Without reflection
Foo foo = new Foo();
foo.hello();
// With reflection
Class cls = Class.forName("Foo");
Object foo = cls.newInstance();
Method method = cls.getMethod("hello", null);
method.invoke(foo, null);
We can simply create an object and call the class's method, but why do the same using forName, newInstance and getMthod functions?
To make everything dynamic?
Simply put: because sometimes you don't know either the "Foo" or "hello" parts at compile time.
The vast majority of the time you do know this, so it's not worth using reflection. Just occasionally, however, you don't - and at that point, reflection is all you can turn to.
As an example, protocol buffers allows you to generate code which either contains full statically-typed code for reading and writing messages, or it generates just enough so that the rest can be done by reflection: in the reflection case, the load/save code has to get and set properties via reflection - it knows the names of the properties involved due to the message descriptor. This is much (much) slower but results in considerably less code being generated.
Another example would be dependency injection, where the names of the types used for the dependencies are often provided in configuration files: the DI framework then has to use reflection to construct all the components involved, finding constructors and/or properties along the way.
It is used whenever you (=your method/your class) doesn't know at compile time the type should instantiate or the method it should invoke.
Also, many frameworks use reflection to analyze and use your objects. For example:
hibernate/nhibernate (and any object-relational mapper) use reflection to inspect all the properties of your classes so that it is able to update them or use them when executing database operations
you may want to make it configurable which method of a user-defined class is executed by default by your application. The configured value is String, and you can get the target class, get the method that has the configured name, and invoke it, without knowing it at compile time.
parsing annotations is done by reflection
A typical usage is a plug-in mechanism, which supports classes (usually implementations of interfaces) that are unknown at compile time.
You can use reflection for automating any process that could usefully use a list of the object's methods and/or properties. If you've ever spent time writing code that does roughly the same thing on each of an object's fields in turn -- the obvious way of saving and loading data often works like that -- then that's something reflection could do for you automatically.
The most common applications are probably these three:
Serialization (see, e.g., .NET's XmlSerializer)
Generation of widgets for editing objects' properties (e.g., Xcode's Interface Builder, .NET's dialog designer)
Factories that create objects with arbitrary dependencies by examining the classes for constructors and supplying suitable objects on creation (e.g., any dependency injection framework)
Using reflection, you can very easily write configurations that detail methods/fields in text, and the framework using these can read a text description of the field and find the real corresponding field.
e.g. JXPath allows you to navigate objects like this:
//company[#name='Sun']/address
so JXPath will look for a method getCompany() (corresponding to company), a field in that called name etc.
You'll find this in lots of frameworks in Java e.g. JavaBeans, Spring etc.
It's useful for things like serialization and object-relational mapping. You can write a generic function to serialize an object by using reflection to get all of an object's properties. In C++, you'd have to write a separate function for every class.
I have used it in some validation classes before, where I passed a large, complex data structure in the constructor and then ran a zillion (couple hundred really) methods to check the validity of the data. All of my validation methods were private and returned booleans so I made one "validate" method you could call which used reflection to invoke all the private methods in the class than returned booleans.
This made the validate method more concise (didn't need to enumerate each little method) and garuanteed all the methods were being run (e.g. someone writes a new validation rule and forgets to call it in the main method).
After changing to use reflection I didn't notice any meaningful loss in performance, and the code was easier to maintain.
in addition to Jons answer, another usage is to be able to "dip your toe in the water" to test if a given facility is present in the JVM.
Under OS X a java application looks nicer if some Apple-provided classes are called. The easiest way to test if these classes are present, is to test with reflection first
some times you need to create a object of class on fly or from some other place not a java code (e.g jsp). at that time reflection is useful.
I have a Util module in my VB.NET program that has project-wide methods such as logging and property parsing. The general practice where I work seems to be to call these methods directly without prefixing them with Util. When I was new to VB, it took me a while to figure out where these methods/functions were coming from. As I use my own Util methods now, I can't help thinking that it's a lot clearer and more understandable to add Util. before each method call (you know immediately that it's user-defined but not within the current class, and where to find it), and is hardly even longer. What's the general practice when calling procedures/functions of VB modules? Should we prefix them with the module name or not?
Intellisense (and "Goto Definition") should make it trivial to find where things are located, but I always preface the calls with a better namespace, just for clarity of reading. Then it's clear that it's a custom function, and not something built in or local to the class you're working with.
Maybe there's a subtle difference I'm missing, but I tend to use shared classes instead of modules for any code that's common and self-contained - it just seems easier to keep track of for me, and it would also enforce your rule of prefacing it, since you can't just call it from everywhere without giving a namespace to call it from.
I usually put the complete namespace for a shared function, for readibility.
Call MyNameSpace.Utils.MySharedFunction()
Util is such a generic name.
Example from the .Net framework. You have System.Web.HttpUtility.UrlEncode(...). Usually you refer to this as HttpUtility.UrlEncode since you have an import statement at the top.
The name of the class which has the static utility methods should be readable and explainable. That is good practice. If you have good class names they might just as well reside in a Utils namespace, but the class name should not be Utils.
Put all your logging in a Logger class. All your string handing in a StringUtils class etc. And try to keep the class names as specific as possible, and I'd rather have more classes with fewer functions than the other way around.
Most likely an OO concept question/situation:
I have a library that I use in my program with source files available. I've realized I need to tailor the library to my needs, say I need to modify the behavior of a single functions F in class C, while leaving the original library's source intact, to be able to painlessly upgrade it when needed.
I realize I can make my own class C1 inherited from C, place it in my source tree, and write the function F how I see it fit, replacing all occurrences of
myObj = new C();
with
myObj = new C1();
throughout my code.
What is the 'proper' way of doing this? I suspect the inheritance method I described has problems, as the library in its internals would still use C::F instead of my C1::F, and it would be way cooler if I could still refer to C::F not some strange C1::F in my code.
For those that care - the language is PHP5, and I'm kinda OOP newbie :)
I think subclassing is pretty much the best way to add functionality to an external library.
The alternative is the decorator pattern whereby you have to wrap every method of the C class. (There is a time and place for the decorator pattern, but I think this isn't it)
You say:
as the library in its internals would still use C::F instead of my C1::F
Not necessarily true. If you pass an instance of the C1 class to a library function, then any calls to method F of that object would still go through your C1::F method. The same also happens when the C class accesses its own method by calling $this->F() -- because it's still a C1 object. This property is called polymorphism
Of course this does not apply when the library's code itself instantiates a new object of class C.