stuck from a couple of days. In ubuntu i'm creating vncserver with command line [tigervnc]
vncserver -localhost yes
to secure connection from only localhost.
vnc is successfully created with port - 5901.
Im using putty to establish SSH tunnelling,
SSH tunnel
in realVNC viewer in using
localhost:9091
But it gives error saying connection refused.
I want to establish a SSH tunnel with only localhost in order to avoid the brute force attack, getting too many authentication failure errors.
What am i doing wrong. Please guide me.
Note : connection works fine if i use vncserver -localhost no. But for security reasons i dont want this
to allow connection from localhost only and to avoid brute-force attack in these any settings need to change in vnc-config or something.
Did a hell of research, couldn't resolve. StackOverflow is the last hope.
Localhost is 127.0.0.1
You have to create SSH TCP FORWARD to localhost (or 127.0.0.1), not 103.16.26.144
There is how I use this on my linux desktop, from a shell terminal.
ssh -fL 9091:localhost:5900 user#103.16.26.144 sleep 2 &&
xvncviewer localhost:9091
Here's the thing. I'd like to access a remote host by ssh, and make a tunnel as a proxy. I did it on my windows computer with Putty. In putty, there is a "tunnels" options, add a dynamic tunnel would do the trick. That is, a (dynamic, that is in the putty's option, I don't really know what it means)tunnel at port 1111, and then I can access the internet though socks5 proxy 127.0.0.1:1111.
But now I want to make the tunnel on my openwrt router, 192.168.1.1, and access the proxy as 192.168.1.1:1111. I want to know how. There are two major question:
1.the proper command of ctl ssh to make a tunnel just as the putty did. I googled a few, but because of the 2nd question, I never know which one is correct.
2.how can I access the tunnel on the router though 192.168.1.1:1111. As I tried before with ss_local(another proxy program), I established a socks locally but it can never be accessed by my another LAN host. Are there some firewall things to do?
Does anyone know the answers? Thank you!
This is what I did to access remotely to my AP.
I used a SSH Reverse Tunnel to a remote server. Here I dump a simple script to achieve it.
key_ssh=/root/.ssh/id_rsa
user=root
ip='YOUR_SERVER_IP'
port='THE_PORT_YOU_WANT_TO_CONNECT_THROUGH'
#connect ssh
ssh -f -N -i $key_ssh -R 0.0.0.0:$port:localhost:22 $user#$ip
And in your remote server you type:
sudo su
ssh -p THE_PORT_YOU_WANT_TO_CONNECT_THROUGH localhost
You will be asked for the root password, type it and you're in.
Closed. This question is not about programming or software development. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed last month.
Improve this question
I am trying to connect to remote server via ssh but getting connection timeout.
I ran the following command
ssh testkamer#test.dommainname.com
and getting following result
ssh: connect to host testkamer#test.dommainname.com port 22: Connection timed out
but if try to connect on another remote server then I can login successfully.
So I think there is no problem in ssh and other person try to login with same login and password he can successfully login to server.
Please help me
Thanks.
Here are a couple of things that could be preventing you from connecting to your Linode instance:
DNS problem: if the computer that you're using to connect to your
remote server isn't resolving test.kameronderdehamer.nl properly
then you won't be able to reach your host. Try to connect using the
public IP address assigned to your Linode and see if it works (e.g.
ssh user#123.123.123.123). If you can connect using the public IP
but not using the hostname that would confirm that you're having
some problem with domain name resolution.
Network issues: there
might be some network issues preventing you from establishing a
connection to your server. For example, there may be a misconfigured
router in the path between you and your host, or you may be
experiencing packet loss. While this is not frequent, it has
happenned to me several times with Linode and can be very annoying.
It could be a good idea to check this just in case. You can have a look
at Diagnosing network issues with MTR (from the Linode
library).
That error message means the server to which you are connecting does not reply to SSH connection attempts on port 22. There are three possible reasons for that:
You're not running an SSH server on the machine. You'll need to install it to be able to ssh to it.
You are running an SSH server on that machine, but on a different port. You need to figure out on which port it is running; say it's on port 1234, you then run ssh -p 1234 hostname.
You are running an SSH server on that machine, and it does use the port on which you are trying to connect, but the machine has a firewall that does not allow you to connect to it. You'll need to figure out how to change the firewall, or maybe you need to ssh from a different host to be allowed in.
EDIT: as (correctly) pointed out in the comments, the third is certainly the case; the other two would result in the server sending a TCP "reset" package back upon the client's connection attempt, resulting in a "connection refused" error message, rather than the timeout you're getting. The other two might also be the case, but you need to fix the third first before you can move on.
I got this error and found that I don't have my SSH port (non standard number) whitelisted in config server firewall.
Just adding this here because it worked for me. Without changing any settings (to my knowledge), I was no longer able to access my AWS EC2 instance with: ssh -i /path/to/key/key_name.pem admin#ecx-x-x-xxx-xx.eu-west-2.compute.amazonaws.com
It turned out I needed to add a rule for inbound SSH traffic, as explained here by AWS. For Port range 22, I added 0.0.0.0/0, which allows all IPv4 addresses to access the instance using SSH.
Note that making the instance accessible to all IPv4 addresses is a security risk; it is acceptable for a short time in a test environment, but you'll likely need a longer term solution.
If you are on Public Network, Firewall will block all incoming connections by default. check your firewall settings or use private network to SSL
The possibility could be, the SSH might not be enabled on your server/system.
Check sudo systemctl status ssh is Active or not.
If it's not active, try installing with the help of these commands
sudo apt update
sudo apt install openssh-server
Now try to access the server/system with following command
ssh username#ip_address
This happens because of firewall connection.
Reset your firewall connection from your hosting website.
It will start working.
After connecting to the server again add this to your (ufw) security
sudo ufw allow 22/tcp
There can be many possible reasons for this failure.
Some are listed above. I faced the same issue, it is very hard to find the root cause of the failure.
I will recommend you to check the session timeout for shh from ssh_config file.
Try to increase the session timeout and see if it fails again
My VPN connection was not enabled. I was trying all possible way to open up the Firwall and Ports until I realized, I am working from home and my VPN connection was down.
But yes, Firewall and ssh configurations can be a reason.
Try connecting to a vpn, if possible. That was the reason I was facing problem.
Tip: if you're using an ec2 machine, try rebooting it. This worked for me the other day :)
I had this issue while trying to ssh into a local nextcloud server from my Mac.
I had no issues ssh-ing in once, but if I tried to have more than one concurrent connection, it would hang until it timed out.
Note, I was sshing to my user#public-ip-address.
I realized the second connection only didn't work when I tried to ssh into it when on the same network, ie my home network
Furthermore, when I tried ssh user#server-domain it worked!
The end fix was to use ssh user#server-domain rather than ssh user#public-ip
I have experienced a couple of nasty issues that lead to these errors, and these are different from everyone else's answer here:
Wrong folder access rights. You need to have specific directory permissions on you ssh folders and files.
a. The .ssh directory permissions should be 700 (drwx------).
b. The public key (.pub file) should be 644 (-rw-r--r--).
c. The private key (id_rsa) on the client host, and the authorized_keys file on the server, should be 600 (-rw-------).
Nasty docker network configuration. This just happened to me on an AWS EC2 instance. It turned out that I had a docker network with an ip range that interfered with the ssh access granted by the security group and VPC. The docker network's range was e.g. 192.168.176.0/20 (i.e. a range from 192.168.176.1->192.168.191.254), whereas the security group had a range of 192.168.179.0/24; interfering with the SSH access.
I had this error when trying to SSH into my Raspberry pi from my MBP via bash terminal. My RPI was connected to the network via wifi/wlan0 and this IP had been changed upon restart by my routers DHCP.
Check IP being used to login via SSH is correct. Re-check IP of device being SSH'd into (in my case the RPI), which can be checked using hostname -I
Confirm/amend SSH login credentials on "guest" device (in my case the MBP) and it worked fine in my attempt.
I faced a similar issue. I checked for the below:
if ssh is not installed on your machine, you will have to install it firstly. (You will get a message saying ssh is not recognized as a command).
Port 22 is open or not on the server you are trying to ssh.
If the control of remote server is in your hands and you have permissions, try to disable firewall on it.
Try to ssh again.
If port is not an issue then you would have to check for firewall settings as it is the one that is blocking your connection.
For me too it was a firewall issue between my machine and remote server.I disabled the firewall on the remote server and I was able to make a connection using ssh.
my main machine is windows 10 and I have CEntOS 7 VBox
Search in your main machine for "known_hosts"
usually, known_host location in windows in "user/.ssh/known_host"
open it using notepad and delete the line where your centos vbox ip
then try connect in your terminal
in mac os user you can find known_hosts in "~/.ssh/known_hosts"
Make sure to ask the admin to authorize your device.
On Linux run:
sudo zerotier-cli listnetworks
if it returns status ACCESS DENIED ask the admin to authorize your node. This is mentioned here.
https://discuss.zerotier.com/t/solved-cant-join-network/1919
This issue is also caused if the Dynamic Host Configuration Protocol is not set-up properly.
To solve this first check if your IP Address is configured using
ping ipaddress,
If there is no packet loss and the IP Address is working fine try any other solution. If there is no response and you have 100% packet loss, it means that your IP Address is not working and not configured.
Now configure your IP Address using,
sudo dhclient -v devicename
To check your device you can use the 'ip a' command
For eg. My device was usb0 since I had connected the device through usb
This will configure an IP Address automatically and you can even see which one is configured. You can again check with the 'ip a' command to confirm.
This may be very case specific and work in some cases only but
check to see if you were previously connecting through some VPN software/application.
Try connecting again to the VPN. Worked in my case.
This happened to me after enabling port 22 with "sudo ufw allow ssh". Before that, I was getting a refusal from my machine when entering with ssh from another one. After enabling it, I thought it would work, but instead it showed the message "connection timed out". As I had just installed Ubuntu with the option of installing basic functions alongside, I checked whether I had the openssh-server with the command sudo apt list --installed | grep openssh-server. It turned out that Ubuntu had installed by defect the openssh-client instead. I uninstalled it and installed the openssh-server following the basic commands:
sudo apt-get purge openssh-client
sudo apt update
sudo apt install openssh-server
After that, a simple "sudo ufw allow ssh" worked perfectly and I was finally able to access the machine with an ssh command.
What worked for me was that i went to my security group and reset my IP and it worked
Here are some considerations which i took to resolve a similar issue that I had:
Port 22
IGW (Internet Gateway)
VPC
Scene 1> This is for port 22 not enabled with right configurations. If the port is set to custom or myip, the probable scene is this won't work.
Scene 2> When you delete the internet gateway, the network is created and the instance will be functional too, but the routing from the internet will not work. Hence make sure that if there is a VPC, it has an Internet Gateway attached.
Scene 3> Check the VPC for the subnet associations and routing table entries. This might probably tell you the cause. I found one in this kind of troubleshooting. The route used to land up in a "blackhole" (shows up in the route table section of the console). To fix this I had to check and find out my internet gateway and found the issue with the IGW.
Moral of the story: always trace backward in the network!
In my case I'm on windows, I reset my firewall settings, and it fixed
If you get any error check the basic a version control request with ssh -V and If it is not installed, install it with the sudo apt-get install openssh-server command.
Check your virtual machine ssh connection with sudo service ssh status at console.
Check "Active" rows and if write a inactive(dead) the console write sudo service ssh start
Result: Now you can check your connection with sudo service ssh status command and send ssh connection request.
Reset the firewall and reboot your VPS from your hosting service, it will start working perfectly fine
check whether accidentally you have deleted the default vpc or default subnets ,while creating your own vpc and subnets.
I have done this mistake while creating vpc, hence got this error while connecting via ssh.
alos check whether u have attched IGW to public subnets.
Its not complicated.
First, go disable your firewall(USE YOUR CONTROL PANEL)after you check if your openssh is active.
Disable firewall, then use putty or any alternative to basically disable using this command sudo ufw disable
try now
Update the security group of that instance. Your local IP must have updated. Every time it’s IP flips. You will have to go update the Security group.
I need to do some work on a server to which I don't have direct access to. I do have access to my company network (via vpn). If I were on that network, I could access the server directly. But, for some reason when I'm on the vpn, I can't access the server directly.
So, I need to ssh into an intermediary ubuntu box, and then create an ssh tunnel from that box to the server.
Then, I can do my work on my laptop and send it through a local tunnel that points to a foreign tunnel (on my ubuntu box) that goes to the server.
But I don't know how to do a tunnel that creates another tunnel to a third server.
Any ideas?
Thanks,
Scott
What are you trying to achieve? If you just want to get to a shell on the server then ssh into the Ubuntu box and then ssh from there to the server.
If you want to access some other network resource on the server then you want to forward a port from the server (where you can't get to it) to the Ubuntu box (where you can). Take a look at the -L option in ssh.
Edit:
Copying files to the server:
tar c path/* | ssh ubuntuName 'ssh serverName "tar x"'
Copying stuff back:
ssh ubuntuName 'ssh serverName "tar c path/*"' | tar x
Obviously you need to change ubuntuName, serverName and path/* to what you want. To use rsync you need the -E option and the same trick of wrapping one ssh command inside another. After reading your comment I'd say that the most general answer to your question is that the trick is making ssh execute a command on the target machine. You do this by specifying the command as an argument after the machine name. If you use ssh as the target command for ssh to execute then you get the two-hop behaviour that you are looking for. Then it is just a matter of playing with quotes until everything is escaped correctly.
It's just a double port forward. Forward the ports from the PC to the ubuntu box, then on the ubuntu box forward those destination ports to the final endpoint. It's been a while since I've done command line ssh (been trapped in windows hell :)), so I can't give the command line you need. Another possibility is to use the SOCKS proxy ability built into SSH.
To connect from your local machine over a second machine to a specific port on the third machine you can use the ssh -N -L option:
ssh -N second_machine -L 8080:third_machine:8082
This maps the Port 8082 on the third machine to port 8080 on the local machine (eg. http://localhost:8080/ ).