I seem to be having a hard time getting the Apache module for Hyperic to compile in Ubuntu 8.10. Has anyone had any luck getting it to work? Does anyone have a precompiled version?
I am running Hyperic HQ version 4.1.2 build #1053, Apache 2.2.x
I got it to work by doing the following:
Symbolically link aclocal and automake old hard coded version to your current version (replace version numbers 1.11 to your own):
sudo ln -s /usr/bin/aclocal-1.11 /usr/bin/aclocal-1.6
sudo ln -s /usr/bin/automake-1.11 /usr/bin/automake-1.6
Rename a conflicting header file:
sudo mv /usr/include/openssl/asn1.h /usr/include/openssl/asn_1.h
Run the installer:
sudo ./build_apache_snmp.sh -r 2.0 /usr/bin/apxs2
Once it is finished make sure you follow the directions located at ./README
Once you have confirmed that the SNMP service is working (using the snmpwalk application that the readme file refers to), reverse the steps above to revert system changes just needed to compile the plugin.
Related
In my site I am getting an error : an error occurred while processing this directive
It was working fine before moving to the new server. So when I checked I found that mod_perl module is missing. So I tried to install it by downloading the module to the server and then tried to run using Perl Makefile.pl but it was asking for apache src and I was not able to find it. I can see /usr/bin/apache/ folder but no source file inside the folder.
So I tried to install the module from Cpanel but I got the following error:
The C compiler is not functional and auto repair failed. Perl module installs require a working C compiler. Please repair the C compiler and try again.
Please let me know how to install it as I have tried most of the cases searching the net.
Thanks in advance
It's probably best to use your distro's packaging system to install mod_perl, especially, if apache is installed from a package too.
Yum based systems:
yum install mod_perl
Deb based systems
apt-get install mod_perl
you may need to enable the module using a2enmod
Mostly gcc is either corrupted or not present on your system. Please try to re/install gcc on your system
sudo apt-get update
sudo apt-get install build-essential
On Redhat:
yum update
yum install devtoolset-2-toolchain
It seems like a problem with your installation of gcc. You're using CloudLinux, so you should use yum to reinstall gcc.
$ sudo -i yum install gcc
But you don't need gcc if you install the pre-build packages.
$ sudo -i yum install mod_perl
Either way, you're going to need to get to grips with package installation for your system - and for that you're going to need root access.
I am a novice with zeroMQ and I am stuck at binding ØMQ with java on a server running CentOS release 5.9.
Unfortunately, I do not have super user/root privileges on the server and am trying to install ØMQ as a normal user with restricted privileges. I have installed ØMQ by following instructions on http://www.zeromq.org/area:download
Make sure that libtool, autoconf, automake are installed.
Check whether uuid-dev package, uuid/e2fsprogs RPM or equivalent on your system is installed.
Unpack the .tar.gz source archive.
Run ./configure, followed by make.
Could not run the following obviously
To install ØMQ system-wide run sudo make install.
On Linux, run sudo ldconfig after installing ØMQ.
Then I attempted to install jzmq.
Cloned [git clone https://github.com/zeromq/jzmq.git]
Ran autogen.sh
Ran configure
At this point I get the following error
checking for ZeroMQ... no
checking zmq.h usability... no
checking zmq.h presence... no
checking for zmq.h... no
configure: error: cannot find zmq.h
As a result of the above error I am not able to run java tests and get error "no jzmq in java.library.path".
Can anybody help/direct me to how to get java binding for zeromq work when you dont have root privileges to install it? Its difficult to get IT department to install a new software on servers.
Appreciate your help.
Note: I do not have write permissions to /usr directory
Thanks
GBP
This can be overcome by adding --with-zeromq=/home/user/zeromq (installation directory of zeromq)
./configure --with-zeromq=/home/user/zeromq
Other steps include
export LD_LIBRARY_PATH=/home/user/zeromq/lib
You can also use JeroMQ (https://github.com/zeromq/jeromq) which is a pure Java implementation of ZeroMQ
I got this working by running autogen.sh on OEL 6 then running configure / compiling / installing on CentOS 5.9. I briefly looked into why autogen.sh was failing and the problem was the tool chain was too old. Since I had a more up-to-date system with a modern tool chain available running autogen.sh on something other than CentOS 5 was the easiest path for me. I'm sure it works fine with other modern Linux variants, I had OEL 6 at my finger tips.
I also did not have access to a standard directory for installation. To get that working I added zmq.jar to my class path, and the run-time linker needed to be able to find the zeromq and jzmq run-time libraries.
I faced the same issue on CentOS 6.5 and found that you need to install "gcc-c++" for this to work.
I used the following to install dependencies:
yum -y install jdk zeromq-devel unzip libtool gcc autoconf automake gcc-c++ python
Note that "jdk" comes from our private repository and it's same what can be downloaded from java.com
The following public repositories are installed on server:
atomic
Actually, I ended up having this same issue, and the following script worked for me, where I installed zeromq into ~ (so that I have ~/lib contains libzmq.a libzmq.la libzmq.so libzmq.so.3 libzmq.so.3.1.0 pkgconfig)
./autogen.sh ./configure --prefix=$HOME \ #because you don't have root privileges
--with-zeromq=$HOME --includedir=$HOME/include/ --libdir=$HOME/lib/
./make
./make -n install
#to check to see if it installs it to the right location
make install
I am trying to install Passenger for Apache on an AWS instance running CENTOS. When I try to install it, it tells me:
GNU C++ compiler... not found
Zlib development headers... not found
These have both been installed (yum install gcc zlib-devel) and are at the latest version. gcc -v says that it's at 4.6.2.
I have seen similar questions where the accepted answer was to run
mount -o remount,rw,exec,nosuid /tmp
This returns the following:
mount: can't find /tmp in /etc/fstab or /etc/mtab
I have tried changing the permissions on the /tmp directory (it does exist, just doesn't appear to be mounted) with chmod 777 /tmp, but this did not allow the Passenger install to see the two packages.
Could someone please help me with this? I'm not sure what else to do at this point.
I couldn't solve the issue above, but I managed to install anyway by adding EPEL, then installing mod_passenger through yum:
rpm -Uvh http://ftp.linux.ncsu.edu/pub/epel/6/i386/epel-release-6-8.noarch.rpm
yum install mod_passenger
As stated in the title, i have apache 2.2.21 running natively as part of my LAMP stack. I would like to upgrade apache to the latest version - 2.4.2. Is there a recommended or best practice to safely perform this operation without breaking stuff of loosing existing settings, etc?
Thank you for the time and direction.
I was able to install the latest version (2.4.2) using the steps below.
Install pcre (perl compatible regular-expression library) using fink (or what ever osx package manager you use)
$ fink install pcre
Install the latest (2.4.2 as of writing this) using the steps below
$ sudp apachectl stop
$ cd ~/Downloads/
$ curl -O http://mirror.uoregon.edu/apache//httpd/httpd-2.4.2.tar.gz
$ gzip -d httpd-2.4.2.tar.gz
$ tar xvf httpd-2.4.2.tar
$ cd httpd-2.4.2
$ ./configure
$ make
$ sudo make install
However, the new binaries got installed under /usr/local and doesn't seem to have overridden the default install locations on OSX lion. And I could not find a config.nice file to use as suggested by the apache upgrade documentation.
The original apache files httpd, apachectl and ab were located on /usr/sbin. Without having found any documentation to confirm this was the right thing to do, I went ahead and backed up the original files and sym-linked the new files from /usr/local/bin into /usr/sbin, as follows.
$ cd /usr/sbin
# backup the original files ...
$ sudo ln -s ../local/bin/ab ab
$ sudo ln -s ../local/bin/apachectl apachectl
$ sudo ln -s ../local/bin/httpd httpd
This seems to have worked, although it would be nice to get a confirmation from someone in the know.
I'm trying to set up mod_wsgi for use with Django. I have apache2, apache2-dev, python2.6, python2.6-dev all installed, but I'm getting this error when running configure:
checking for apxs2... /usr/bin/apxs2
checking Apache version... 2.2.14
checking for python... /usr/bin/python
configure: creating ./config.status
config.status: error: cannot find input file: Makefile.in
Thanks for the help!
I had the exact same problem. Installing the apache2-dev package solved it.
sudo apt-get install apache2-dev
I don't think the asker needs this answer anymore, so I answered for future readers with similar problems
Install apache2-threaded-dev:
$ sudo apt-get install apache2-threaded-dev
I started writing that you may need to ensure that you have axps installed (you can do this by installing the apache2-dev package). but I notice that configure already found axps. I had a similar problem but configure was bailing on not finding this dependency. Maybe some similar dependency or write permissions.
You are running the mod_WSGI 'configure' script in the mod_WSGI source code directory aren't you? Ie., in the same directory as the Makefile.in file that comes with the source tar ball.
mod_wsgi's configure script uses apxs to find the path to httpd:
apxs -q SBINDIR
apxs -q TARGET
Combine those with a "/" and add "-v", e.g.,
/blah/bin/httpd -v
That should run without an error. If it does not then mod_wsgi's configure script can't figure out the httpd version and you will get a broken symbolic link for Makefile.in.
For me, libpcre.so.0 wasn't in the LD_LIBRARY_PATH. Doing this:
export LD_LIBRARY_PATH=/usr/local/lib
then reconfiguring mod_wsgi and building fixed the problem.