Related
I have a large dataset stored in a SQL server table, with 1 unique ID, and many attributes. I need to select the distinct attribute records, along with one of the unique IDs associated with that unique combination.
Example dataset:
ID|Col1|Col2|Col3...
1|big|blue|ball
2|big|red|ball
3|big|blue|ball
4|small|red|ball
Example Goal (2,3,4 would also have been acceptable) :
ID|Col1|Col2|Col3...
1|big|blue|ball
2|big|red|ball
4|small|red|ball
I have tried a few different methods, but all of them seem to be taking very long (hours), so I was wondering if there was a more efficient approach. Failing this, my next idea is to partition the table.
I have tried:
Using Where exists, e.g.
SELECT * from Table as T1
where exists (select *
from table as T2
where
ISNULL(T1.ID,'') <> ISNULL(T2.ID,'')
AND ISNULL([T1].[Col1],'') = ISNULL([T2].[Col1],'')
AND ISNULL([T1].[Col2],'') = ISNULL([T2].[Col2],'')
)
MAX(ID) and Group By Attributes.
GROUP BY Attributes, having count > 1.
How about just using group by?
select min(id), col1, col2, col3
from t
group by col1, col2, col3;
This will probably take a while. This might be more efficient:
select t.*
from t
where t.id = (select min(t2.id)
from t t2
where t.col1 = t2.col1 and t.col2 = t2.col2 and . . .
);
This requires an index on t(col1, col2, col3, . . ., id). Given your request, that is on all columns.
In addition, this will not work for columns that are NULL. Some databases support the ANSI standard is not distinct from for null-safe comparisons. If yours does, then it should use the index for this construct as well.
SELECT Id,Col1,Col2,Col3 FROM (
SELECT Id,Col1,Col2,Col3,ROW_NUMBER() OVER (Partition By Col1,Col2,Col3 Order By ID,Col1,Col2,Col3) valid
from Table as T1) t
WHERE valid=1
Hope this helps...
I need to remove duplicate rows from a fairly large SQL Server table (i.e. 300,000+ rows).
The rows, of course, will not be perfect duplicates because of the existence of the RowID identity field.
MyTable
RowID int not null identity(1,1) primary key,
Col1 varchar(20) not null,
Col2 varchar(2048) not null,
Col3 tinyint not null
How can I do this?
Assuming no nulls, you GROUP BY the unique columns, and SELECT the MIN (or MAX) RowId as the row to keep. Then, just delete everything that didn't have a row id:
DELETE FROM MyTable
LEFT OUTER JOIN (
SELECT MIN(RowId) as RowId, Col1, Col2, Col3
FROM MyTable
GROUP BY Col1, Col2, Col3
) as KeepRows ON
MyTable.RowId = KeepRows.RowId
WHERE
KeepRows.RowId IS NULL
In case you have a GUID instead of an integer, you can replace
MIN(RowId)
with
CONVERT(uniqueidentifier, MIN(CONVERT(char(36), MyGuidColumn)))
Another possible way of doing this is
;
--Ensure that any immediately preceding statement is terminated with a semicolon above
WITH cte
AS (SELECT ROW_NUMBER() OVER (PARTITION BY Col1, Col2, Col3
ORDER BY ( SELECT 0)) RN
FROM #MyTable)
DELETE FROM cte
WHERE RN > 1;
I am using ORDER BY (SELECT 0) above as it is arbitrary which row to preserve in the event of a tie.
To preserve the latest one in RowID order for example you could use ORDER BY RowID DESC
Execution Plans
The execution plan for this is often simpler and more efficient than that in the accepted answer as it does not require the self join.
This is not always the case however. One place where the GROUP BY solution might be preferred is situations where a hash aggregate would be chosen in preference to a stream aggregate.
The ROW_NUMBER solution will always give pretty much the same plan whereas the GROUP BY strategy is more flexible.
Factors which might favour the hash aggregate approach would be
No useful index on the partitioning columns
relatively fewer groups with relatively more duplicates in each group
In extreme versions of this second case (if there are very few groups with many duplicates in each) one could also consider simply inserting the rows to keep into a new table then TRUNCATE-ing the original and copying them back to minimise logging compared to deleting a very high proportion of the rows.
There's a good article on removing duplicates on the Microsoft Support site. It's pretty conservative - they have you do everything in separate steps - but it should work well against large tables.
I've used self-joins to do this in the past, although it could probably be prettied up with a HAVING clause:
DELETE dupes
FROM MyTable dupes, MyTable fullTable
WHERE dupes.dupField = fullTable.dupField
AND dupes.secondDupField = fullTable.secondDupField
AND dupes.uniqueField > fullTable.uniqueField
The following query is useful to delete duplicate rows. The table in this example has ID as an identity column and the columns which have duplicate data are Column1, Column2 and Column3.
DELETE FROM TableName
WHERE ID NOT IN (SELECT MAX(ID)
FROM TableName
GROUP BY Column1,
Column2,
Column3
/*Even if ID is not null-able SQL Server treats MAX(ID) as potentially
nullable. Because of semantics of NOT IN (NULL) including the clause
below can simplify the plan*/
HAVING MAX(ID) IS NOT NULL)
The following script shows usage of GROUP BY, HAVING, ORDER BY in one query, and returns the results with duplicate column and its count.
SELECT YourColumnName,
COUNT(*) TotalCount
FROM YourTableName
GROUP BY YourColumnName
HAVING COUNT(*) > 1
ORDER BY COUNT(*) DESC
delete t1
from table t1, table t2
where t1.columnA = t2.columnA
and t1.rowid>t2.rowid
Postgres:
delete
from table t1
using table t2
where t1.columnA = t2.columnA
and t1.rowid > t2.rowid
DELETE LU
FROM (SELECT *,
Row_number()
OVER (
partition BY col1, col1, col3
ORDER BY rowid DESC) [Row]
FROM mytable) LU
WHERE [row] > 1
This will delete duplicate rows, except the first row
DELETE
FROM
Mytable
WHERE
RowID NOT IN (
SELECT
MIN(RowID)
FROM
Mytable
GROUP BY
Col1,
Col2,
Col3
)
Refer (http://www.codeproject.com/Articles/157977/Remove-Duplicate-Rows-from-a-Table-in-SQL-Server)
I would prefer CTE for deleting duplicate rows from sql server table
strongly recommend to follow this article ::http://codaffection.com/sql-server-article/delete-duplicate-rows-in-sql-server/
by keeping original
WITH CTE AS
(
SELECT *,ROW_NUMBER() OVER (PARTITION BY col1,col2,col3 ORDER BY col1,col2,col3) AS RN
FROM MyTable
)
DELETE FROM CTE WHERE RN<>1
without keeping original
WITH CTE AS
(SELECT *,R=RANK() OVER (ORDER BY col1,col2,col3)
FROM MyTable)
DELETE CTE
WHERE R IN (SELECT R FROM CTE GROUP BY R HAVING COUNT(*)>1)
To Fetch Duplicate Rows:
SELECT
name, email, COUNT(*)
FROM
users
GROUP BY
name, email
HAVING COUNT(*) > 1
To Delete the Duplicate Rows:
DELETE users
WHERE rowid NOT IN
(SELECT MIN(rowid)
FROM users
GROUP BY name, email);
Quick and Dirty to delete exact duplicated rows (for small tables):
select distinct * into t2 from t1;
delete from t1;
insert into t1 select * from t2;
drop table t2;
I prefer the subquery\having count(*) > 1 solution to the inner join because I found it easier to read and it was very easy to turn into a SELECT statement to verify what would be deleted before you run it.
--DELETE FROM table1
--WHERE id IN (
SELECT MIN(id) FROM table1
GROUP BY col1, col2, col3
-- could add a WHERE clause here to further filter
HAVING count(*) > 1
--)
SELECT DISTINCT *
INTO tempdb.dbo.tmpTable
FROM myTable
TRUNCATE TABLE myTable
INSERT INTO myTable SELECT * FROM tempdb.dbo.tmpTable
DROP TABLE tempdb.dbo.tmpTable
I thought I'd share my solution since it works under special circumstances.
I my case the table with duplicate values did not have a foreign key (because the values were duplicated from another db).
begin transaction
-- create temp table with identical structure as source table
Select * Into #temp From tableName Where 1 = 2
-- insert distinct values into temp
insert into #temp
select distinct *
from tableName
-- delete from source
delete from tableName
-- insert into source from temp
insert into tableName
select *
from #temp
rollback transaction
-- if this works, change rollback to commit and execute again to keep you changes!!
PS: when working on things like this I always use a transaction, this not only ensures everything is executed as a whole, but also allows me to test without risking anything. But off course you should take a backup anyway just to be sure...
This query showed very good performance for me:
DELETE tbl
FROM
MyTable tbl
WHERE
EXISTS (
SELECT
*
FROM
MyTable tbl2
WHERE
tbl2.SameValue = tbl.SameValue
AND tbl.IdUniqueValue < tbl2.IdUniqueValue
)
it deleted 1M rows in little more than 30sec from a table of 2M (50% duplicates)
Using CTE. The idea is to join on one or more columns that form a duplicate record and then remove whichever you like:
;with cte as (
select
min(PrimaryKey) as PrimaryKey
UniqueColumn1,
UniqueColumn2
from dbo.DuplicatesTable
group by
UniqueColumn1, UniqueColumn1
having count(*) > 1
)
delete d
from dbo.DuplicatesTable d
inner join cte on
d.PrimaryKey > cte.PrimaryKey and
d.UniqueColumn1 = cte.UniqueColumn1 and
d.UniqueColumn2 = cte.UniqueColumn2;
Yet another easy solution can be found at the link pasted here. This one easy to grasp and seems to be effective for most of the similar problems. It is for SQL Server though but the concept used is more than acceptable.
Here are the relevant portions from the linked page:
Consider this data:
EMPLOYEE_ID ATTENDANCE_DATE
A001 2011-01-01
A001 2011-01-01
A002 2011-01-01
A002 2011-01-01
A002 2011-01-01
A003 2011-01-01
So how can we delete those duplicate data?
First, insert an identity column in that table by using the following code:
ALTER TABLE dbo.ATTENDANCE ADD AUTOID INT IDENTITY(1,1)
Use the following code to resolve it:
DELETE FROM dbo.ATTENDANCE WHERE AUTOID NOT IN (SELECT MIN(AUTOID) _
FROM dbo.ATTENDANCE GROUP BY EMPLOYEE_ID,ATTENDANCE_DATE)
This is the easiest way to delete duplicate record
DELETE FROM tblemp WHERE id IN
(
SELECT MIN(id) FROM tblemp
GROUP BY title HAVING COUNT(id)>1
)
Use this
WITH tblTemp as
(
SELECT ROW_NUMBER() Over(PARTITION BY Name,Department ORDER BY Name)
As RowNumber,* FROM <table_name>
)
DELETE FROM tblTemp where RowNumber >1
Here is another good article on removing duplicates.
It discusses why its hard: "SQL is based on relational algebra, and duplicates cannot occur in relational algebra, because duplicates are not allowed in a set."
The temp table solution, and two mysql examples.
In the future are you going to prevent it at a database level, or from an application perspective. I would suggest the database level because your database should be responsible for maintaining referential integrity, developers just will cause problems ;)
I had a table where I needed to preserve non-duplicate rows.
I'm not sure on the speed or efficiency.
DELETE FROM myTable WHERE RowID IN (
SELECT MIN(RowID) AS IDNo FROM myTable
GROUP BY Col1, Col2, Col3
HAVING COUNT(*) = 2 )
Oh sure. Use a temp table. If you want a single, not-very-performant statement that "works" you can go with:
DELETE FROM MyTable WHERE NOT RowID IN
(SELECT
(SELECT TOP 1 RowID FROM MyTable mt2
WHERE mt2.Col1 = mt.Col1
AND mt2.Col2 = mt.Col2
AND mt2.Col3 = mt.Col3)
FROM MyTable mt)
Basically, for each row in the table, the sub-select finds the top RowID of all rows that are exactly like the row under consideration. So you end up with a list of RowIDs that represent the "original" non-duplicated rows.
The other way is Create a new table with same fields and with Unique Index. Then move all data from old table to new table. Automatically SQL SERVER ignore (there is also an option about what to do if there will be a duplicate value: ignore, interrupt or sth) duplicate values. So we have the same table without duplicate rows. If you don't want Unique Index, after the transfer data you can drop it.
Especially for larger tables you may use DTS (SSIS package to import/export data) in order to transfer all data rapidly to your new uniquely indexed table. For 7 million row it takes just a few minute.
By useing below query we can able to delete duplicate records based on the single column or multiple column. below query is deleting based on two columns. table name is: testing and column names empno,empname
DELETE FROM testing WHERE empno not IN (SELECT empno FROM (SELECT empno, ROW_NUMBER() OVER (PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
or empname not in
(select empname from (select empname,row_number() over(PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
Create new blank table with the same structure
Execute query like this
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) > 1
Then execute this query
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) = 1
Another way of doing this :--
DELETE A
FROM TABLE A,
TABLE B
WHERE A.COL1 = B.COL1
AND A.COL2 = B.COL2
AND A.UNIQUEFIELD > B.UNIQUEFIELD
I would mention this approach as well as it can be helpful, and works in all SQL servers:
Pretty often there is only one - two duplicates, and Ids and count of duplicates are known. In this case:
SET ROWCOUNT 1 -- or set to number of rows to be deleted
delete from myTable where RowId = DuplicatedID
SET ROWCOUNT 0
From the application level (unfortunately). I agree that the proper way to prevent duplication is at the database level through the use of a unique index, but in SQL Server 2005, an index is allowed to be only 900 bytes, and my varchar(2048) field blows that away.
I dunno how well it would perform, but I think you could write a trigger to enforce this, even if you couldn't do it directly with an index. Something like:
-- given a table stories(story_id int not null primary key, story varchar(max) not null)
CREATE TRIGGER prevent_plagiarism
ON stories
after INSERT, UPDATE
AS
DECLARE #cnt AS INT
SELECT #cnt = Count(*)
FROM stories
INNER JOIN inserted
ON ( stories.story = inserted.story
AND stories.story_id != inserted.story_id )
IF #cnt > 0
BEGIN
RAISERROR('plagiarism detected',16,1)
ROLLBACK TRANSACTION
END
Also, varchar(2048) sounds fishy to me (some things in life are 2048 bytes, but it's pretty uncommon); should it really not be varchar(max)?
DELETE
FROM
table_name T1
WHERE
rowid > (
SELECT
min(rowid)
FROM
table_name T2
WHERE
T1.column_name = T2.column_name
);
CREATE TABLE car(Id int identity(1,1), PersonId int, CarId int)
INSERT INTO car(PersonId,CarId)
VALUES(1,2),(1,3),(1,2),(2,4)
--SELECT * FROM car
;WITH CTE as(
SELECT ROW_NUMBER() over (PARTITION BY personid,carid order by personid,carid) as rn,Id,PersonID,CarId from car)
DELETE FROM car where Id in(SELECT Id FROM CTE WHERE rn>1)
I you want to preview the rows you are about to remove and keep control over which of the duplicate rows to keep. See http://developer.azurewebsites.net/2014/09/better-sql-group-by-find-duplicate-data/
with MYCTE as (
SELECT ROW_NUMBER() OVER (
PARTITION BY DuplicateKey1
,DuplicateKey2 -- optional
ORDER BY CreatedAt -- the first row among duplicates will be kept, other rows will be removed
) RN
FROM MyTable
)
DELETE FROM MYCTE
WHERE RN > 1
I am trying to update a table with records from another table. Whenever I use the insert into statement, I find that the records are simply appended. Instead, I want the records to be inserted from the top of the table. What is the easiest way to do this? I am thin king I could use a update statement, but that means I will have to join the tables. One of the tables(the one I am pulling records from) has only one column. As such, I would have to include another column to do the join.I am trying not to make it so complicated. If there is a simplier way, please let me know.
Sample:
Table One
Col1
1
2
3
4
Table 2
Col1 Col2
a
b
c
d
I want to move column 1 from table 1 to column 2 in table 2 such that table 2 will be:
Table 2
Col1 Col2
a 1
b 2
c 3
d 4
You can do the update using row_number(), but the rows will be assigned in an indeterminate order:
with toupdate as (
select t2.*, row_number() over (select NULL)) as seqnum
from table2 t2
),
t1 as (
select t1.*, row_numbrer() over (select NULL)) as seqnum
from table1 t1
)
update toupdate
set col2 = t1.col1
from toupdate join
t1
on toupdate.seqnum = t1.seqnum;
Note: if you have an ordering in mind, then use the appropriate order by in the partition clauses.
Unless you explicity define an ORDER BY clause in your SELECT statements, your result set will be completely arbitrary. This is in line with how any RDBMS should operate. You should consider including a timestamp at the time of insertion to identify the latest rows.
I need to remove duplicate rows from a fairly large SQL Server table (i.e. 300,000+ rows).
The rows, of course, will not be perfect duplicates because of the existence of the RowID identity field.
MyTable
RowID int not null identity(1,1) primary key,
Col1 varchar(20) not null,
Col2 varchar(2048) not null,
Col3 tinyint not null
How can I do this?
Assuming no nulls, you GROUP BY the unique columns, and SELECT the MIN (or MAX) RowId as the row to keep. Then, just delete everything that didn't have a row id:
DELETE FROM MyTable
LEFT OUTER JOIN (
SELECT MIN(RowId) as RowId, Col1, Col2, Col3
FROM MyTable
GROUP BY Col1, Col2, Col3
) as KeepRows ON
MyTable.RowId = KeepRows.RowId
WHERE
KeepRows.RowId IS NULL
In case you have a GUID instead of an integer, you can replace
MIN(RowId)
with
CONVERT(uniqueidentifier, MIN(CONVERT(char(36), MyGuidColumn)))
Another possible way of doing this is
;
--Ensure that any immediately preceding statement is terminated with a semicolon above
WITH cte
AS (SELECT ROW_NUMBER() OVER (PARTITION BY Col1, Col2, Col3
ORDER BY ( SELECT 0)) RN
FROM #MyTable)
DELETE FROM cte
WHERE RN > 1;
I am using ORDER BY (SELECT 0) above as it is arbitrary which row to preserve in the event of a tie.
To preserve the latest one in RowID order for example you could use ORDER BY RowID DESC
Execution Plans
The execution plan for this is often simpler and more efficient than that in the accepted answer as it does not require the self join.
This is not always the case however. One place where the GROUP BY solution might be preferred is situations where a hash aggregate would be chosen in preference to a stream aggregate.
The ROW_NUMBER solution will always give pretty much the same plan whereas the GROUP BY strategy is more flexible.
Factors which might favour the hash aggregate approach would be
No useful index on the partitioning columns
relatively fewer groups with relatively more duplicates in each group
In extreme versions of this second case (if there are very few groups with many duplicates in each) one could also consider simply inserting the rows to keep into a new table then TRUNCATE-ing the original and copying them back to minimise logging compared to deleting a very high proportion of the rows.
There's a good article on removing duplicates on the Microsoft Support site. It's pretty conservative - they have you do everything in separate steps - but it should work well against large tables.
I've used self-joins to do this in the past, although it could probably be prettied up with a HAVING clause:
DELETE dupes
FROM MyTable dupes, MyTable fullTable
WHERE dupes.dupField = fullTable.dupField
AND dupes.secondDupField = fullTable.secondDupField
AND dupes.uniqueField > fullTable.uniqueField
The following query is useful to delete duplicate rows. The table in this example has ID as an identity column and the columns which have duplicate data are Column1, Column2 and Column3.
DELETE FROM TableName
WHERE ID NOT IN (SELECT MAX(ID)
FROM TableName
GROUP BY Column1,
Column2,
Column3
/*Even if ID is not null-able SQL Server treats MAX(ID) as potentially
nullable. Because of semantics of NOT IN (NULL) including the clause
below can simplify the plan*/
HAVING MAX(ID) IS NOT NULL)
The following script shows usage of GROUP BY, HAVING, ORDER BY in one query, and returns the results with duplicate column and its count.
SELECT YourColumnName,
COUNT(*) TotalCount
FROM YourTableName
GROUP BY YourColumnName
HAVING COUNT(*) > 1
ORDER BY COUNT(*) DESC
delete t1
from table t1, table t2
where t1.columnA = t2.columnA
and t1.rowid>t2.rowid
Postgres:
delete
from table t1
using table t2
where t1.columnA = t2.columnA
and t1.rowid > t2.rowid
DELETE LU
FROM (SELECT *,
Row_number()
OVER (
partition BY col1, col1, col3
ORDER BY rowid DESC) [Row]
FROM mytable) LU
WHERE [row] > 1
This will delete duplicate rows, except the first row
DELETE
FROM
Mytable
WHERE
RowID NOT IN (
SELECT
MIN(RowID)
FROM
Mytable
GROUP BY
Col1,
Col2,
Col3
)
Refer (http://www.codeproject.com/Articles/157977/Remove-Duplicate-Rows-from-a-Table-in-SQL-Server)
I would prefer CTE for deleting duplicate rows from sql server table
strongly recommend to follow this article ::http://codaffection.com/sql-server-article/delete-duplicate-rows-in-sql-server/
by keeping original
WITH CTE AS
(
SELECT *,ROW_NUMBER() OVER (PARTITION BY col1,col2,col3 ORDER BY col1,col2,col3) AS RN
FROM MyTable
)
DELETE FROM CTE WHERE RN<>1
without keeping original
WITH CTE AS
(SELECT *,R=RANK() OVER (ORDER BY col1,col2,col3)
FROM MyTable)
DELETE CTE
WHERE R IN (SELECT R FROM CTE GROUP BY R HAVING COUNT(*)>1)
To Fetch Duplicate Rows:
SELECT
name, email, COUNT(*)
FROM
users
GROUP BY
name, email
HAVING COUNT(*) > 1
To Delete the Duplicate Rows:
DELETE users
WHERE rowid NOT IN
(SELECT MIN(rowid)
FROM users
GROUP BY name, email);
Quick and Dirty to delete exact duplicated rows (for small tables):
select distinct * into t2 from t1;
delete from t1;
insert into t1 select * from t2;
drop table t2;
I prefer the subquery\having count(*) > 1 solution to the inner join because I found it easier to read and it was very easy to turn into a SELECT statement to verify what would be deleted before you run it.
--DELETE FROM table1
--WHERE id IN (
SELECT MIN(id) FROM table1
GROUP BY col1, col2, col3
-- could add a WHERE clause here to further filter
HAVING count(*) > 1
--)
SELECT DISTINCT *
INTO tempdb.dbo.tmpTable
FROM myTable
TRUNCATE TABLE myTable
INSERT INTO myTable SELECT * FROM tempdb.dbo.tmpTable
DROP TABLE tempdb.dbo.tmpTable
I thought I'd share my solution since it works under special circumstances.
I my case the table with duplicate values did not have a foreign key (because the values were duplicated from another db).
begin transaction
-- create temp table with identical structure as source table
Select * Into #temp From tableName Where 1 = 2
-- insert distinct values into temp
insert into #temp
select distinct *
from tableName
-- delete from source
delete from tableName
-- insert into source from temp
insert into tableName
select *
from #temp
rollback transaction
-- if this works, change rollback to commit and execute again to keep you changes!!
PS: when working on things like this I always use a transaction, this not only ensures everything is executed as a whole, but also allows me to test without risking anything. But off course you should take a backup anyway just to be sure...
This query showed very good performance for me:
DELETE tbl
FROM
MyTable tbl
WHERE
EXISTS (
SELECT
*
FROM
MyTable tbl2
WHERE
tbl2.SameValue = tbl.SameValue
AND tbl.IdUniqueValue < tbl2.IdUniqueValue
)
it deleted 1M rows in little more than 30sec from a table of 2M (50% duplicates)
Using CTE. The idea is to join on one or more columns that form a duplicate record and then remove whichever you like:
;with cte as (
select
min(PrimaryKey) as PrimaryKey
UniqueColumn1,
UniqueColumn2
from dbo.DuplicatesTable
group by
UniqueColumn1, UniqueColumn1
having count(*) > 1
)
delete d
from dbo.DuplicatesTable d
inner join cte on
d.PrimaryKey > cte.PrimaryKey and
d.UniqueColumn1 = cte.UniqueColumn1 and
d.UniqueColumn2 = cte.UniqueColumn2;
Yet another easy solution can be found at the link pasted here. This one easy to grasp and seems to be effective for most of the similar problems. It is for SQL Server though but the concept used is more than acceptable.
Here are the relevant portions from the linked page:
Consider this data:
EMPLOYEE_ID ATTENDANCE_DATE
A001 2011-01-01
A001 2011-01-01
A002 2011-01-01
A002 2011-01-01
A002 2011-01-01
A003 2011-01-01
So how can we delete those duplicate data?
First, insert an identity column in that table by using the following code:
ALTER TABLE dbo.ATTENDANCE ADD AUTOID INT IDENTITY(1,1)
Use the following code to resolve it:
DELETE FROM dbo.ATTENDANCE WHERE AUTOID NOT IN (SELECT MIN(AUTOID) _
FROM dbo.ATTENDANCE GROUP BY EMPLOYEE_ID,ATTENDANCE_DATE)
This is the easiest way to delete duplicate record
DELETE FROM tblemp WHERE id IN
(
SELECT MIN(id) FROM tblemp
GROUP BY title HAVING COUNT(id)>1
)
Use this
WITH tblTemp as
(
SELECT ROW_NUMBER() Over(PARTITION BY Name,Department ORDER BY Name)
As RowNumber,* FROM <table_name>
)
DELETE FROM tblTemp where RowNumber >1
Here is another good article on removing duplicates.
It discusses why its hard: "SQL is based on relational algebra, and duplicates cannot occur in relational algebra, because duplicates are not allowed in a set."
The temp table solution, and two mysql examples.
In the future are you going to prevent it at a database level, or from an application perspective. I would suggest the database level because your database should be responsible for maintaining referential integrity, developers just will cause problems ;)
I had a table where I needed to preserve non-duplicate rows.
I'm not sure on the speed or efficiency.
DELETE FROM myTable WHERE RowID IN (
SELECT MIN(RowID) AS IDNo FROM myTable
GROUP BY Col1, Col2, Col3
HAVING COUNT(*) = 2 )
Oh sure. Use a temp table. If you want a single, not-very-performant statement that "works" you can go with:
DELETE FROM MyTable WHERE NOT RowID IN
(SELECT
(SELECT TOP 1 RowID FROM MyTable mt2
WHERE mt2.Col1 = mt.Col1
AND mt2.Col2 = mt.Col2
AND mt2.Col3 = mt.Col3)
FROM MyTable mt)
Basically, for each row in the table, the sub-select finds the top RowID of all rows that are exactly like the row under consideration. So you end up with a list of RowIDs that represent the "original" non-duplicated rows.
The other way is Create a new table with same fields and with Unique Index. Then move all data from old table to new table. Automatically SQL SERVER ignore (there is also an option about what to do if there will be a duplicate value: ignore, interrupt or sth) duplicate values. So we have the same table without duplicate rows. If you don't want Unique Index, after the transfer data you can drop it.
Especially for larger tables you may use DTS (SSIS package to import/export data) in order to transfer all data rapidly to your new uniquely indexed table. For 7 million row it takes just a few minute.
By useing below query we can able to delete duplicate records based on the single column or multiple column. below query is deleting based on two columns. table name is: testing and column names empno,empname
DELETE FROM testing WHERE empno not IN (SELECT empno FROM (SELECT empno, ROW_NUMBER() OVER (PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
or empname not in
(select empname from (select empname,row_number() over(PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
Create new blank table with the same structure
Execute query like this
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) > 1
Then execute this query
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) = 1
Another way of doing this :--
DELETE A
FROM TABLE A,
TABLE B
WHERE A.COL1 = B.COL1
AND A.COL2 = B.COL2
AND A.UNIQUEFIELD > B.UNIQUEFIELD
I would mention this approach as well as it can be helpful, and works in all SQL servers:
Pretty often there is only one - two duplicates, and Ids and count of duplicates are known. In this case:
SET ROWCOUNT 1 -- or set to number of rows to be deleted
delete from myTable where RowId = DuplicatedID
SET ROWCOUNT 0
From the application level (unfortunately). I agree that the proper way to prevent duplication is at the database level through the use of a unique index, but in SQL Server 2005, an index is allowed to be only 900 bytes, and my varchar(2048) field blows that away.
I dunno how well it would perform, but I think you could write a trigger to enforce this, even if you couldn't do it directly with an index. Something like:
-- given a table stories(story_id int not null primary key, story varchar(max) not null)
CREATE TRIGGER prevent_plagiarism
ON stories
after INSERT, UPDATE
AS
DECLARE #cnt AS INT
SELECT #cnt = Count(*)
FROM stories
INNER JOIN inserted
ON ( stories.story = inserted.story
AND stories.story_id != inserted.story_id )
IF #cnt > 0
BEGIN
RAISERROR('plagiarism detected',16,1)
ROLLBACK TRANSACTION
END
Also, varchar(2048) sounds fishy to me (some things in life are 2048 bytes, but it's pretty uncommon); should it really not be varchar(max)?
DELETE
FROM
table_name T1
WHERE
rowid > (
SELECT
min(rowid)
FROM
table_name T2
WHERE
T1.column_name = T2.column_name
);
CREATE TABLE car(Id int identity(1,1), PersonId int, CarId int)
INSERT INTO car(PersonId,CarId)
VALUES(1,2),(1,3),(1,2),(2,4)
--SELECT * FROM car
;WITH CTE as(
SELECT ROW_NUMBER() over (PARTITION BY personid,carid order by personid,carid) as rn,Id,PersonID,CarId from car)
DELETE FROM car where Id in(SELECT Id FROM CTE WHERE rn>1)
I you want to preview the rows you are about to remove and keep control over which of the duplicate rows to keep. See http://developer.azurewebsites.net/2014/09/better-sql-group-by-find-duplicate-data/
with MYCTE as (
SELECT ROW_NUMBER() OVER (
PARTITION BY DuplicateKey1
,DuplicateKey2 -- optional
ORDER BY CreatedAt -- the first row among duplicates will be kept, other rows will be removed
) RN
FROM MyTable
)
DELETE FROM MYCTE
WHERE RN > 1
I have an engine that builds a query. So this is not static and this is why I had to go this way (below). Plus, it works for SQL and Oracle (Oracle adds different wrapper, RowNum, etc...). I have no easy way to test Oracle but below is SQL Server problem, step-by-step logic
Lets take a simple query
Select field1 as f1, myDate dateFld From table1 t1 Where t1.field2 = 1
I may or may not, have to union output with another table
Select field1, myDate dateFld as f1 From table1 t1 Where t1.field2 = 1
Union
Select field2, myDate dateFld as f1 From table2 t2 Where t2.field2 = 2
I need to get only N records from this Union
Select Top(N) *
From
(
Select field1 as f1, myDate dateFld From table1 t1 Where t1.field2 = 1
Union
Select field2 as f1, myDate dateFld From table2 t2 Where t2.field2 = 2
) Union_Tbl_Alias
Order By dateFld Desc, f1
Remember this "Order by"
I also have Select Subqueries (and nothing I can do but have them in Select), which I moved to yet another Select wrapper
Select
f1,
myDate,
(Select field99 From table99 t99 Where t99.f1 = Outer_Tbl_Alias.f1) as f3
From
(
Select Top(N) *
From
(
Select field1 as f1, myDate dateFld From table1 t1 Where t1.field2 = 1
Union
Select field2 as f1, myDate dateFld From table2 t2 Where t2.field2 = 2
)
Order By dateFld Desc, f1
) Outer_Tbl_Alias
So the problem is that outer-most select reshuffles records a bit. They no longer sorted dateFld Desc.
I don't want to speculate, I think, this is only SQL Server issue but I will test it in oracle as well. Moving "Order By" to outer-most statement fixes it for SQL Server.
But I'm wondering:
1 - why it happens?
2 - is there a hint to tell SQL server - keep the order of inner Select?
That behavior appears to make sense. Your outer query does not contain an ORDER BY clause so the order of the results is arbitrary. The fact that rows may have been ordered in a subquery is not controlling (though it undoubtedly does end up affecting the order of the results). Since you are building the query programmatically, it would make far more sense to add whatever ORDER BY clause you want than to try to work around the issue (and I'm not aware of a way to work around the issue that is guaranteed to work every time).
You'll have exactly the same issue when you run against an Oracle database and switch out the TOP for a couple of nested queries with rownum predicates. The only way to guarantee the order of your results is to add an ORDER BY clause. Since that is going to be necessary regardless of the database you are using, it makes even more sense to do it correctly by adding the additional ORDER BY to the outer query rather than having different database-specific workarounds.