ASP Regular Expression for UK Telephone format in VB.net - vb.net

Question

I want regular expression validator for my telephone field in VB.net. Please see the requirement below:
Telephone format should be (+)xx-(0)xxxx-xxxxxx ext xxxx (Optional) example my number would appear as 44-7966-591739 Screen would be formatted to show [phone] ext
Please suggest.
Best Regards,
Yuv

Answer 1

[phone]
The (0) is not valid in phone number display. Remove it.
It's [phone] or 07966 591739.
The RegEx pattern is inefficient in multiple ways:
(\d{4}|\d{3})
The above simplifies to:
\d{3,4}
There are bigger problems:
^(((+44\s?\d{4}|(?0\d{4})?)\s?\d{3}\s?\d{3})|((+44\s?\d{3}|(?0\d{3})?)\s?\d{3}\s?\d{4})|((+44\s?\d{2}|(?0\d{2})?)\s?\d{4}\s?\d{4}))(\s?#(\d{4}|\d{3}))?$
Having found the leading +44 or leading 0 once, why keep on searching for it again and again?
^((+44\s?..|0..).....|(+44\s?..|0..).....|(+44\s?..|0..).....)
simplifies to
^(+44\s?|0)(.. .....|.. .....|.. .....)
However, the above pattern caters only for UK 4+6, 3+7 and 2+8 format numbers and not for 3+6, 4+5, 5+5 and 5+4 format numbers.
The pattern is inadequate.
Phone number validation and formatting needs to be broken down into separate steps. Allow a wide range of input formats, extract the vital digits and throw away the various dial prefixes, then strictly format the remaining number in international or national format.
For London numbers, the correct format with spaces is:
[phone] or 020 3555 7890 or [phone]
and without spaces:
[phone] or 02035557890.
(0) in parentheses is NEVER valid. Do not use it.
UK phone numbers use a variety of formats: 2+8, 3+7, 3+6, 4+6, 4+5, 5+5, 5+4. Some users don't know which format goes with which number range and might use the wrong one on input. Let them do that; you're interested in the DIGITS.
Step 1: Check the input format looks valid
Make sure that the input looks like a UK phone number. Accept various dial prefixes, +44, 011 44, 00 44 with or without parentheses, hyphens or spaces; or national format with a leading 0. Let the user use any format they want for the remainder of the number: [phone] or 00 (44) 203 555 7788 or 02035-557-788 even if it is the wrong format for that particular number. Don't worry about unbalanced parentheses. The important part of the input is making sure it's the correct number of digits. Punctuation and spaces don't matter.
^\(?(?:(?:0(?:0|11)\)?[\s-]?\(?|\+)44\)?[\s-]?\(?(?:0\)?[\s-]?\(?)?|0)(?:\d{5}\)?[\s-]?\d{4,5}|\d{4}\)?[\s-]?(?:\d{5}|\d{3}[\s-]?\d{3})|\d{3}\)?[\s-]?\d{3}[\s-]?\d{3,4}|\d{2}\)?[\s-]?\d{4}[\s-]?\d{4}|8(?:00[\s-]?11[\s-]?11|45[\s-]?46[\s-]?4\d))(?:(?:[\s-]?(?:x|ext\.?\s?|\#)\d+)?)$
The above pattern matches optional opening parentheses, followed by 00 or 011 and optional closing parentheses, followed by an optional space or hyphen, followed by optional opening parentheses. Alternatively, the initial opening parentheses are followed by a literal + without a following space or hyphen. Any of the previous two options are then followed by 44 with optional closing parentheses, followed by optional space or hyphen, followed by optional 0 in optional parentheses, followed by optional space or hyphen, followed by optional opening parentheses (international format). Alternatively, the pattern matches optional initial opening parentheses followed by the 0 trunk code (national format).
The previous part is then followed by the NDC (area code) and the subscriber phone number in 2+8, 3+7, 3+6, 4+6, 4+5, 5+5 or 5+4 format with or without spaces and/or hyphens. This also includes provision for optional closing parentheses and/or optional space or hyphen after where the user thinks the area code ends and the local subscriber number begins. The pattern allows any format to be used with any GB number. The display format must be corrected by later logic if the wrong format for this number has been used by the user on input.
The pattern ends with an optional extension number arranged as an optional space or hyphen followed by x, ext and optional period, or #, followed by the extension number digits. The entire pattern does not bother to check for balanced parentheses as these will be removed from the number in the next step.
At this point you don't care whether the number begins 01 or 07 or something else. You don't care whether it's a valid area code. Later steps will deal with those issues.
Step 2: Extract the NSN so it can be checked in more detail for length and range
After checking the input looks like a GB telephone number using the pattern above, the next step is to extract the NSN part so that it can be checked in greater detail for validity and then formatted in the right way for the applicable number range.
^\(?(?:(?:0(?:0|11)\)?[\s-]?\(?|\+)(44)\)?[\s-]?\(?(?:0\)?[\s-]?\(?)?|0)([1-9]\d{1,4}\)?[\s\d-]+)(?:((?:x|ext\.?\s?|\#)\d+)?)$
Use the above pattern to extract the '44' from $1 to know that international format was used, otherwise assume national format if $1 is null.
Extract the optional extension number details from $3 and store them for later use.
Extract the NSN (including spaces, hyphens and parentheses) from $2.
Step 3: Validate the NSN
Remove the spaces, hyphens and parentheses from $2 and use further RegEx patterns to check the length and range and identify the number type.
These patterns will be much simpler, since they will not have to deal with various dial prefixes or country codes.
The pattern to match valid mobile numbers is therefore as simple as
^7([45789]\d{2}|624)\d{6}$
Premium rate is
^9[018]\d{8}$
There will be a number of other patterns for each number type: landlines, business rate, non-geographic, VoIP, etc.
By breaking the problem into several steps, a very wide range of input formats can be allowed, and the number range and length for the NSN checked in very great detail.
Step 4: Store the number
Once the NSN has been extracted and validated, store the number with country code and all the other digits with no spaces or punctuation, e.g. 442035557788.
Step 5: Format the number for display
Another set of simple rules can be used to format the number with the requisite +44 or 0 added at the beginning.
The rule for numbers beginning 03 is
^44(3\d{2})(\d{3])(\d{4})$
formatted as
0$1 $2 $3 or as +44 $1 $2 $3
and for numbers beginning 02 is
^44(2\d)(\d{4})(\d{4})$
formatted as
(0$1) $2 $3 or as +44 $1 $2 $3
The full list is quite long. I could copy and paste it all into this thread, but it would be hard to maintain that information in multiple places over time. For the present the complete list can be found at: http://aa-asterisk.org.uk/index.php/Regular_Expressions_for_Validating_and_Formatting_GB_Telephone_Numbers

Answer 2

For validation:
As bobince points out, you should be flexible with phone numbers because there are so many ways to enter them.
One simple yet effective way to validate the value is first strip all non-numeric values, then make sure it is at least 11 digits long, and - if you're limiting to UK numbers - then check it starts with either 0 or 44.
I can't be bothered looking up vb.net syntax, but something along the lines of this:
if Phone.replaceAll('\D','').length < 11
// Invalid Number
endif;
(The \D is regex for anything not 0-9.)
To format a number as requested, assuming you've got a relatively fixed input that you want to display to a page, something like this might work:
replace:
(\d{2,3})\D*0?\D*(\d{4})\D*(\d{5})\D*(\d*)
with:
+$1-(0)$2-$3 ext $4
That's fairly flexible but wont accept any old phone number. It currently required an international code at the start, and I'm not quite sure on the rules of them to know if it's going to work perfectly, but it might be good enough for what you need.
An explanation of that regex, in regex comment mode (so it can be used directly as a regex if necessary):
(?x) # enable regex comment mode (whitespace ignored, hashes start comments)
# international code:
(\d{2,3}) # matches 3 or 2 digits; captured to group 1.
# optional 0 with potental spaces dashes or parens:
\D* # matches as many non-digits as possible, none required.
0? # optionally match a zero
\D* # matches as many non-digits as possible, none required.
# main part of number:
(\d{4}) # match 4 digits; captured to group 2
\D* # matches as many non-digits as possible, none required.
(\d{5}) # match 5 digits; captured to group 3.
# optional prefix:
\D* # matches as many non-digits as possible, none required.
(\d*) # match as many digits as possible, none required; captured to group 4.

Answer 3

Never include a (0) in parentheses in the international format.
ITU E.123 warns against it: http://www.itu.int/rec/T-REC-E.123-200102-I/en
as does: http://revk.www.me.uk/2009/09/it-is-not-44-0207-123-4567.html