If only one row with a distinct field is to be updated,I can use:
insert into tab(..) value(..) on duplicate key update ...
But now it's not the case,I need to update 4 rows inside the same table,which have its field "accountId" equal to $_SESSION['accountId'].
What I can get out of my mind at the moment is:
delete from tab where accountId = $_SESSION['accountId'],
then insert the new rows.
Which obviously is not the best solution.
Has someone a better idea about this?
Use the update just like that!
update tab set col1 = 'value' where accountId = $_SESSION['accountId']
Moreover, MySQL allows you to do an update with a join, if that makes your life a bit easier:
update
tab t
inner join accounts a on
t.accountid = a.accountid
set
t.col1 = 'value'
where
a.accountname = 'Tom'
Based on your question, it seems like you should review the Update Statement.
Insert is used to put new rows in - not update them. Delete is used to remove. And Update is used to modify existing rows. Using "Insert On Duplicate Key Update" is a hackish way to modify rows, and is poor form to use when you know the row is already there.
load all of the values in to a temporary table.
UPDATE all of the values using a JOIN.
INSERT all of the values from the temp table that don't exist in the target table.
You can use replace statement. This will work as a DELETE followed by INSERT
Related
I have had a look at similar problems, however none of the answers helped in my case.
Just a little bit of background. I have Two databases, both have the same table with the same fields and structure. Data already exists in both tables. I want to overwrite and add to the data in db1.table from db2.table the primary ID is causing a problem with the update.
When I use the query:
USE db1;
INSERT INTO db2.table(field_id,field1,field2)
SELECT table.field_id,table.field1,table.field2
FROM table;
It works to a blank table, because none of the primary keys exist. As soon as the primary key exists it fails.
Would it be easier for me to overwrite the primary keys? or find the primary key and update the fields related to the field_id? Im really not sure how to go ahead from here. The data needs to be migrated every 5min, so possibly a stored procedure is required?
first you should try to add new records then update all records.you can create a procedure like below code
PROCEDURE sync_Data(a IN NUMBER ) IS
BEGIN
insert into db2.table
select *
from db1.table t
where t.field_id not in (select tt.field_id from db2.table tt);
begin
for t in (select * from db1.table) loop
update db2.table aa
set aa.field1 = t.field1,
aa.field2 = t.field2
where aa.field_id = t.field_id;
end loop;
end;
END sync_Data
Set IsIdentity to No in Identity Specification on the table in which you want to move data, and after executing your script, set it to Yes again
I ended up just removing the data in the new database and sending it again.
DELETE FROM db2.table WHERE db2.table.field_id != 0;
USE db1;
INSERT INTO db2.table(field_id,field1,field2)
SELECT table.field_id,table.field1,table.field2
FROM table;
Its not very efficient, but gets the job done. I couldnt figure out the syntax to correctly do an UPDATE or to change the IsIdentity field within MariaDB, so im not sure if they would work or not.
The overhead of deleting and replacing non-trivial amounts of data for an entire table will be prohibitive. That said I'd prefer to update in place (merge) over delete /replace.
USE db1;
INSERT INTO db2.table(field_id,field1,field2)
SELECT t.field_id,t.field1,t.field2
FROM table t
ON DUPLICATE KEY UPDATE field1 = t.field1, field2 = t.field2
This can be used inside a procedure and called every 5 minutes (not recommended) or you could build a trigger that fires on INSERT and UPDATE to keep the tables in sync.
INSERT INTO database1.tabledata SELECT * FROM database2.tabledata;
But you have to keep length of varchar length larger or equal to database2 and keep the same column name
I have a table that looks like the below table:
Every time the user loan a book a new record is inserted.
The data in this table is derived or taken from another table which has no dates.
I need to update this tables based on the records in the other table: Meaning I only need to update this table based on what changes.
Example: Lets say the user return the book Starship Troopers and the book return is indicated to Yes.
How do I update just that column?
What I have tried:
I tried using the MERGE Statement but it works only with unique rows of data, meaning you get an error if the same ID appears more than once.
I also tried using a basic UPDATE Statement and a JOIN but that's not going well.
I am asking because I have ran out of ideas.
Thanks for reading
If you need to update BooksReturn in target table based on the same column in source table
UPDATE t
SET t.booksreturn = s.booksreturn
FROM target t JOIN source s
ON t.userid = s.userid
AND t.booksloaned = s.booksloaned
Here is SQLFiddle demo
You can do this by simple Update & Insert statement.....
Two table A & B
From B you want to insert data into A if not exists other wise Update that data....
,First Insert into temp table....
SELECT *
INTO #MYTEMP
FROM B
WHERE BOOKSLOANED NOT IN (SELECT BOOKSLOANED
FROM A)
,Second Check data and insert into A.
INSERT INTO A
SELECT *
FROM #MYTEMP
And at last write one simple update statement which update all data of A. If any change then it also reflect to that data otherwise data as it is.
You can also update from #MYTEMP table.
I have two tables with the same column anomaly_id. I want to copy the row of anomaly_id from the first table to the second table using this code
UPDATE amb.anamoly_log_update
SET anamoly_id = t2.anomaly_id
FROM amb.anamoly_log_update t1
INNER JOIN amb.anomaly_fee t2 ON t1.anamoly_id=t2.anomaly_id
Even after I did that it shows 0 rows affected, when there is data in amb.anomaly.fee (source table)
Please help
Edit: Comment from post: I just want to copy all the anamoly_id from amb.anamoly_fee to amb.anamoly_log_update. My code might be nonsensical. Please do review it.
To copy the id from anomaly_fee to anamoly_log_update use :
INSERT INTO anamoly_log_update (anamoly_id)
SELECT anamoly_id FROM anomaly_fee
with both columns it looks like that:
INSERT INTO anamoly_log_update (anamoly_id,PID)
SELECT anamoly_id,PID FROM anomaly_fee
You only would copy the data if they where in both tables .. and then there is nothing update because you do not change the data => 0 rows affected
ON t1.anamoly_id=t2.anomaly_id
please think about what you really want to do and change your description ..
Does amb.anamoly_log_update contain at least one row corresponding to the anamoly_id that's present in amb.anamoly_fee? You are trying to join on two tables on anamoly_id.
You need to provide other linkage between tables than t1.anamoly_id=t2.anomaly_id or the query will do nothing
merge into amb.anamoly_log_update as t1
using amb.anomaly_fee as t2
on t1.anamoly_id=t2.anomaly_id
when matched then
update set t1.anamoly_id = t2.anomaly_id
We have a status table. When the status changes we currently delete the old record and insert a new.
We are wondering if it would be faster to do a select to check if it exists followed by an insert or update.
Although similar to the following question, it is not the same, since we are changing individual records and the other question was doing a total table refresh.
DELETE, INSERT vs UPDATE || INSERT
Since you're talking SQL Server 2008, have you considered MERGE? It's a single statement that allows you to do an update or insert:
create table T1 (
ID int not null,
Val1 varchar(10) not null
)
go
insert into T1 (ID,Val1)
select 1,'abc'
go
merge into T1
using (select 1 as ID,'def' as Val1) upd on T1.ID = upd.ID --<-- These identify the row you want to update/insert and the new value you want to set. They could be #parameters
when matched then update set Val1 = upd.Val1
when not matched then insert (ID,Val1) values (upd.ID,upd.Val1);
What about INSERT ... ON DUPLICATE KEY? First doing a select to check if a record exists and checking in your program the result of that creates a race condition. That might not be important in your case if there is only a single instance of the program however.
INSERT INTO users (username, email) VALUES ('Jo', 'jo#email.com')
ON DUPLICATE KEY UPDATE email = 'jo#email.com'
You can use ##ROWCOUNT and perform UPDATE. If it was 0 rows affected - then perform INSERT after, nothing otherwise.
Your suggestion would mean always two instructions for each status change. The usual way is to do an UPDATE and then check if the operation changed any rows (Most databases have a variable like ROWCOUNT which should be greater than 0 if something changed). If it didn't, do an INSERT.
Search for UPSERT for find patterns for your specific DBMS
Personally, I think the UPDATE method is the best. Instead of doing a SELECT first to check if a record already exists, you can first attempt an UPDATE but if no rows are affected (using ##ROWCOUNT) you can do an INSERT.
The reason for this is that sooner or later you might want to track status changes, and the best way to do this would be to keep an audit trail of all changes using a trigger on the status table.
I need to insert a data into a DB using query like this one:
INSERT INTO Table1
(aID)
VALUES
(select aID from Table2 where aID="aID"))
The problem is that if Table2 doesn’t have the aID I need to update it with it and extract the newly created ID. Is there a SQL command that automatically does it?
Your question is kinda all over the map...
The problem is that if Table2 doesn’t have the aID I need to update it with it - what do mean by this?
If it doesn't exist you got to insert it ...rght?
Having said that, you need to write a stored-procedure to achieve your objective...and also set "aID"...to be an auto-incremental,seeded Identifier column type
Let me know if you need elaboration
Presumably, you have more columns to add in the real query, as it doesn't make any sense at the moment, you just have one column in the whole thing.
Presuming that you want to insert some other columns from table 2 into table 1 and then update into table 2 the new id that comes from the table 1, there's no one command that will do this for you.
Something like (in SQL Server)
DECLARE #newId int
insert into table1 (.. columns..) values select (..columns..) from Table2 where aID="aID")
select #newId=scope_identity()
update table2 set foreign_key_column_to_table_1=#newId where aID="aID"