When I try to run a bunch of PNG-8 images with alpha transparency through Imagemagick, it converts them to PNG-32, increasing the file size a lot.
Is it possible to force Imagemagick to keep my image type as 8-bit PNG?
You can do it like this:
convert test.png PNG8:test2.png
I've had varying luck with IM and PNG8, but this is the correct way to do it.
I seem to get the best result using the following
convert src.png -colors 256 PNG8:dest.png
Related
How do I convert only page 2 of a pdf file to a jpg image file, using GraphicsMagick command line prompt?
What option can I use in the gm.exe convert command?
gm.exe convert testing.pdf testing.jpg
Add the page number (starting from zero) in square brackets after the PDF filename:
gm.exe convert testing.pdf[1] testing.jpg
By the way, you can use the same indexing technique for accessing specific frames of a GIF animation, or layers of multi-layer/directory TIFFs.
use the blow command, will get high quality png with white background.
magick convert -density 300 -quality 100% -background white -alpha remove -alpha off ./646.04.pdf ./x.png
I have a small pixel map and want to resize it for better readability.
Using mogrify -resize 1600% I get an interpolated image: .
What I'm trying to get is this: .
Can this be done by ImageMagick or any other open source command line tool?
I finally found the solution: using -scale instead of -resize does the trick. It is 'hidden' under the heading Scale - Minify with pixel averaging, therefore I overlooked it at first, searching for magnification instead of minification.
This worked for me:
convert input.png -interpolate Integer -filter point -resize "10000%" output.png
Explanation:
Interpolation method "Integer" just picks a nearest value.
Filter 'point' is also necessary, but I do not know why.
display -sample 400% worked for me.
"Change the image size simply by directly sampling the pixels original from the image. When magnifying, pixels are replicated in blocks. When minifying, pixels are sub-sampled (i.e., some rows and columns are skipped over)."
https://imagemagick.org/script/command-line-options.php#sample
To keep the original values of the input image and avoid any blend or bluriness, you can use -interpolate nearest-neighbor or -interpolate integer.
It only works along -interpolative-resize. Be aware that -resize does not work correctly with -interpolate. You can check here on the imagemagick docs.
e.g.
convert input.png -interpolate nearest-neighbor -interpolative-resize 1600% output.png
I have many scanned document in PDF.
I use ImageMagick with Ghostscript to convert PDF to PNG in big density. I use convert -density 288 2.pdf 2.png. After that I read the pixels with PHP and find where is QR code and decode it. Because image is very big (~ 2500px), it's need very much RAM. I want, before I read pixels with PHP, to crop the image with ImageMagick and leave only that part with the QR code.
Can I detect the approximate location of QR code with ImageMagick, crop and leave only that part ?
Sample PDF
Converted PNG
Further Update
I see your discussion with Kurt about better extraction of the image from the PDF in the first place, and his recommendation was to use pdfimages. I just wanted to add that you won't find that if you do brew search pdfimages, but you actually need to use
brew install poppler
and then you get the pdfimages executable.
Updated Answer
If you change the tile size to 100x100 on the crop command and run this for the second PDF you supplied:
convert -density 288 pdf2.pdf -crop 100x100 tile%04d.png
and then use the same entropy analysis command
convert -format "%[entropy]:%X%Y:%f\n" tile*.png info: | sort -n
...
...
0.84432:+600+3100:tile0750.png
0.846019:+600+2800:tile0678.png
0.980938:+700+400:tile0103.png
0.984906:+700+500:tile0127.png
0.988808:+600+400:tile0102.png
0.998365:+600+500:tile0126.png
The last 4 listed tiles are
Likewise for the other PDF file you supplied, you get
0.863498:+1900+500:tile0139.png
0.954581:+2000+500:tile0140.png
0.974077:+1900+600:tile0163.png
0.97671:+2000+600:tile0164.png
which means these tiles
I would think that should help you pretty much approximately locate the QR code.
Original Answer
This is not all that scientific, but it may help you get started. The key, I think, is the entropy of the various areas of the image. The QR code has a lot of information encoded in a small area so it should have high entropy. So, I use ImageMagick to split the image into square 400x400 tiles like this:
convert image.png -crop 400x400 tile%03d.png
which gives me 54 tiles. Then I calculate the entropy of each of the tiles and sort them by increasing entropy, also outputting their offsets from the top left of the frame, and their name, like this:
convert -format "%[entropy]:%X%Y:%f\n" tile*.png info: | sort -n
0.00408949:+1200+2800:tile045.png
0.00473755:+1600+2800:tile046.png
0.00944815:+800+2800:tile044.png
0.0142171:+1200+3200:tile051.png
0.0143607:+1600+3200:tile052.png
0.0341039:+400+2800:tile043.png
0.0349564:+800+3200:tile050.png
0.0359226:+800+0:tile002.png
0.0549334:+800+400:tile008.png
0.0556793:+400+3200:tile049.png
0.0589632:+400+0:tile001.png
0.0649078:+1200+0:tile003.png
0.10811:+1200+400:tile009.png
0.116287:+2000+3200:tile053.png
0.120092:+800+800:tile014.png
0.12454:+0+2800:tile042.png
0.125963:+1600+0:tile004.png
0.128795:+800+1200:tile020.png
0.133506:+0+400:tile006.png
0.139894:+1600+400:tile010.png
0.143205:+2000+2800:tile047.png
0.144552:+400+2400:tile037.png
0.153143:+0+0:tile000.png
0.154167:+400+400:tile007.png
0.173786:+0+2400:tile036.png
0.17545:+400+1600:tile025.png
0.193964:+2000+400:tile011.png
0.209993:+0+3200:tile048.png
0.211954:+1200+800:tile015.png
0.215337:+400+2000:tile031.png
0.218159:+800+1600:tile026.png
0.230095:+2000+1200:tile023.png
0.237791:+2000+0:tile005.png
0.239336:+2000+1600:tile029.png
0.24275:+800+2400:tile038.png
0.244751:+0+2000:tile030.png
0.254958:+800+2000:tile032.png
0.271722:+2000+2000:tile035.png
0.275329:+0+1600:tile024.png
0.278992:+2000+800:tile017.png
0.282241:+400+1200:tile019.png
0.285228:+1200+1200:tile021.png
0.290524:+400+800:tile013.png
0.320734:+0+800:tile012.png
0.330168:+1600+2000:tile034.png
0.360795:+1200+2000:tile033.png
0.391519:+0+1200:tile018.png
0.421396:+1200+1600:tile027.png
0.421421:+2000+2400:tile041.png
0.421696:+1600+2400:tile040.png
0.486866:+1600+1600:tile028.png
0.489479:+1600+800:tile016.png
0.611449:+1600+1200:tile022.png
0.674079:+1200+2400:tile039.png
and, hey presto, the last one listed (i.e. the one with the highest entropy) tile039.png is this one.
I have drawn a rectangle around its location using this command
convert image.png -stroke red -fill none -strokewidth 3 -draw "rectangle 1200,2400 1600,2800" a.jpg
I concede there may be luck involved, but I only have one image to test my mad theories. You may need to tile twice, the second time with an x-offset and y-offset of half a tile width, so that you don't cut the QR code and split it across 2 tiles. You may need different size tiles for different size barcodes. You may need to consider the last 3-5 tiles located for your next algorithm. But I think it could form the basis of a method.
i want to shrink png or jpg on OSX. i only want to shrinkg without affecting the image quality.
like tinypng.org
is there any recommended library? i just know imagemagick. is there a way to do that natively? or another library to shrink/compress images without affecting the image quality?
my aim is to shrink the file size, for example:
logo.png >> 476 k before shrink
logo.png >> 50k after shrink
Edit: to be clear, i want to compress the size of the file, not the image resolution.
TinyPNG.org works by using image quantisation - the similar colours in the image are converted into a HSV or RGB model and then merged depending on the distance.
How does it work?
...
When you upload a PNG (Portable Network Graphics) file, similar colours in your image are combined. This technique is called “quantisation”
...
src: http://tinypng.org
An answer here outlines a method of doing so: https://stackoverflow.com/a/492230/556479.
There are also some answers on this question with refer to how you can do so on Mac OS using objective-c: How do I reduce a bitmap to a known set of RGB colours
See Wikipedia for a more in depth guide: http://en.wikipedia.org/wiki/Color_quantization
Did you have a problem using ImageMagick? It has a rich set of quantize functions such as
bool MagickQuantizeImage( MagickWand mgck_wnd,
float number_colors,
int colorspace_type,
float treedepth,
bool dither,
bool measure_error )
Here is a very thorough guide to quantization using imageMagick
My suggestion is to use http://pngnq.sourceforge.net, it will give better results than ImageMagick and for the single example given in http://tinypng.org, it also produces a very similar output. It is a tiny C implementation of the method present in the paper "Kohonen Neural Networks for Optimal Colour Quantization". That alone is much better since you are no longer relying on closed unknown implementations.
Original (57 KB), tinypng.org (16 KB), pngnq (17 KB):
Using ImageMagick, the best quantization to 256 colors I can get uses the LAB colorspace and dithering by Floyd-Steinberg:
convert input.png -quantize LAB -dither FloydSteinberg -colors 256 output.png
This produces a 16 KB png, but it contains much more visual artifacts:
I have a camera which produces photographs of 3008x2000 pixels. I use Image Magick to scale and resize the photos to be put up on my website. The size of the images I am using on the website is 602x400. I use this command to reduce the size:
convert DSC_0124.JPG -scale 20% -size 24% img1.jpg
This produces an image which is 602x400 pixels in size. But the file size will be always above 250KB. More images on a single html page means the page will be heavier and loading time will be longer. Are there any features in image magic that will help me to keep the file size as small as possible, possibly, below 100KB. But the image size should be the same, that is, 602x400px. I have achieved similar optimisation with SEAMonster tool for MS Windows. As it doean't have a commandline alternative, it wouldn't be of much help when there are hundreds of images to be converted.
Use command as Delan proposed with additional "-strip" flag to remove EXIF data, this have reduced the size of some of my images drastically. Here is a bash script for unix platforms, but you can use the second part only for individual images.
for X in *.jpg; do convert "$X" -resize 602x400 -strip -quality 86 "$X"; done
This will convert all images in the directory.
Use -quality to set the compression level:
convert DSC_0124.JPG -scale 20% -size 24% -quality [0..100] img1.jpg
You can define the maximum size of the output image at 100KB like this:
convert DSC_0124.JPG -resize 602x400! -strip -define jpeg:extent=100KB img1.jpg
If you are running your website on PHP, you might want to consider the SLIR image resizing script, it does a great job resizing to various constraints (see below) and caches the results.
Parameters:
w Maximum width
h Maximum height
c Crop ratio
q Quality
b Background fill color
p Progressive
http://shiftingpixel.com/2008/03/03/smart-image-resizer/
http://code.google.com/p/smart-lencioni-image-resizer/