Why would anyone want to mark a class as final or sealed?
According to Wikipedia, "Sealed classes are primarily used to prevent derivation. They add another level of strictness during compile-time, improve memory usage, and trigger certain optimizations that improve run-time efficiency."
Also, from Patrick Smacchia's blog:
Versioning: When a class is originally sealed, it can change to unsealed in the future without breaking compatibility. (…)
Performance: (…) if the JIT compiler sees a call to a virtual method using a sealed types, the JIT compiler can produce more efficient code by calling the method non-virtually.(…)
Security and Predictability: A class must protect its own state and not allow itself to ever become corrupted. When a class is unsealed, a derived class can access and manipulate the base class’s state if any data fields or methods that internally manipulate fields are accessible and not private.(…)
Those are all pretty good reasons - I actually wasn't aware of the performance benefit implications until I looked it up just now :)
The versioning and security points seem like a huge benefit in terms of code confidence, which is very well justified on any kind of large project. It's no drop-in for unit testing, of course, but it would help.
Because creating a type for inheritance is much harder work than most folks think. It is best to mark all types this way by default as this will prevent others from inheriting from a type that was never intended to be extended.
Whether or not a type should be extended is a decision of the developer who created it, not the developer who comes along later and wants to extend it.
Joshua Bloch in his book Effective Java talks about it. He says "document for inheritance or disallow it".
The point is that class is sort of a contract between author and client. Allowing client to inherit from base class makes this contract much more strict. If you are going to inherit from it, you most likely are going to override some methods, otherwise you can replace inheritance with composition. Which methods are allowed to be overridden, and what you have to do implementing them - should be documented, or your code can lead to unpredictable results. As far as I remember, he shows such example - here is a collection class with methods
public interface Collection<E> extends Iterable<E> {
...
boolean add(E e);
boolean addAll(Collection<? extends E> c);
...
}
There is some implementation, i.e. ArrayList. Now you want to inherit from it and override some methods, so it prints to console a message when element is added. Now, do you need to override both add and addAll, or only add? It depends on how addAll is implemented - does it work with internal state directly (as ArrayList does) or calls add (as AbstractCollection does). Or may be there is addInternal, which is called by both add and addAll. There were no such questions until you decided to inherit from this class. If you just use it - it does not bother you. So the author of the class has to document it, if he wants you to inherit from his class.
And what if he wants to change the implementation in the future? If his class is only used, never inherited from, nothing stops him from changing implementation to more efficient. Now, if you inherited from that class, looked at source and found that addAll calls add, you override only add. Later author changes implementation so addAll no longer calls add - your program is broken, message is not printed when addAll is called. Or you looked at source and found that addAll does not call add, so you override add and addAll. Now author changes implementation, so addAll calls add - your program is broken again, when addAll is called message is printed twice for each element.
So - if you want your class to be inherited from, you need to document how. If you think that you may need to change something in the future that may break some subclasses - you need to think how to avoid it. By letting your clients inherit from your class you expose much more of internal implementation details that you do when you just let them use your class - you expose internal workflow, that is often subject to changes in future versions.
If you expose some details and clients rely on them - you no longer can change them. If it is ok with you, or you documented what can and what can not be overriden - that's fine. Sometimes you just don't want it. Sometimes you just want to say - "just use this class, never inherit from it, because I want a freedom to change internal implementation details".
So basically comment "Because the class doesn't want to have any children and we should respect it's wishes" is correct.
So, someone wants to mark a class as final/sealed, when he thinks that possible implementation details changes are more valuable than inheritance. There are other ways to achieve results similar to inheritance.
Related
After reading about SOLID in a few places, I was having trouble mapping between explanations with different vocabularies and code. To generalize a bit, I created the diagrams below, and I was hoping that people could point out any 'bugs' in my understanding.
Of course, feel free to reuse/remix/redistribute as you'd like!
I think your diagrams look quite nice, but I'm afraid that I couldn't understand them (particularly the interface one), so I'll comment on the text.
It's not really clear to me what you mean by layer, in the Open/closed I thought you might mean interface, but the interface and dependency items suggest you don't mean that.
Open/closed : actually your text from the Liskov item is closer to describing open/closed. If the code is open for extension, we can make use of it (by extending it) to implement new requirements, but by not modifying the existing code (it's closed for modification) we know we wont break any existing code that made use of it.
"Only depend on outer layer" - if this means only depend on an interface not the implementation, then yes, that's an important principle for SOLID code even though it doesn't map directly to any of the 5 letters.
Dependency inversion uses that but goes beyond it. A piece of code can make use of another via its interface and this is has great maintainability benefits over relying on the implementation, but if the calling code still has the responsibility for creating the object (and therefore choosing the class) that implements the interface then it still has a dependency. If we create the concrete object outside the class or method and pass it in as an interface, then the called code no longer depends on the concrete class, just the interface
void SomeFunction()
{
IThing myIthing* = new ConcreteThing();
// code below can use the interface but this function depends on the Concrete class
}
void SomeFunctionDependencyInjectedVersion(IThing myIthing*)
{
// this version should be able to work with any class that implements the IThing interface,
// whether it really can might depend on some of the other SOLID principles
}
Single responsibility : this isn't about classes intersecting, this is about not giving a code more than one responsibility. If you have a function where you can't think of a better name than doSomethingAndSomethingElse this might be a sign its got more than one responsibility and could be better if it was split (the point I'm making is about the "and" in the name even when the "somethings" are better named).
You should try to define that responsibility so that the class can perform it entirely, (although it make may use of other classes that perform sub-responsibilities for it) but at each level of responsibility that a class is defined it should have one clear reason to exist. When it has more than one it can make code harder to understand, and changes to code related to one responsibility can have unwanted side-effects on other responsibilities.
Iterface segregation: Consider a class implementing a collection. The class will implement code to add to the collection or to read from it. We could put all this in one interface, but if we separate it then when we have consuming code that only needs to read and doesn't need to add to the collection then it can use the interface made of the reading methods. This can make the code clearer in that it shows quickly that the code only needs those methods, and, if we've injected the collection by interface we could also use that code with a different source of items that doesn't have the ability to add items
(consider IEnumerable vs ICollection vs IList)
Liskov substitution is all about making sure that objects that inherit from an interface/base class behave in the way that the interface/base class promised to behave. In the strictest interpretation of the original definition they'd need to behave exactly the same, but that's not all that useful. More generally its about behaving in a consistent and expected way, the derived classes may add functionality, but they should be able to do the job of the base objects (they can be substituted for them)
I have some questions about the affects of using concrete classes and interfaces.
Say some chunk of code (call it chunkCode) uses concrete class A. Would I have to re-compile chunkCode if:
I add some new public methods to A? If so, isn't that a bit stange? After all I still provide the interface chunkCode relies on. (Or do I have to re-compile because chunkCode may never know otherwise that this is true and I haven't omitted some API)
I add some new private methods to A?
I add a new public field to A?
I add a new private field to A?
Factory Design Pattern:
The main code doesn't care what the concrete type of the object is. It relies only on the API. But what would you do if there are few methods which are relevant to only one concrete type? This type implements the interface but adds some more public methods? Would you use some if (A is type1) statements (or the like) the main code?
Thanks for any clarification
1) Compiling is not an activity in OO. It is a detail of specific OO implementations. If you want an answer for a specific implementation (e.g. Java), then you need to clarify.
In general, some would say that adding to an interface is not considered a breaking change, wheras others say you cannot change an interface once it is published, and you have to create a new interface.
Edit: You specified C#, so check out this question regarding breaking changes in .Net. I don't want to do that answer a disservice, so I won't try to replicate it here.
2) People often hack their designs to do this, but it is a sign that you have a poor design.
Good alternatives:
Create a method in your interface that allows you to invoke the custom behavior, but not be required to know what that behavior is.
Create an additional interface (and a new factory) that supports the new methods. The new interface does not have to inherit the old interface, but it can if it makes sense (if an is-a relationship can be expressed between the interfaces).
If your language supports it, use the Abstract Factory pattern, and take advantage of Covariant Return Types in the concrete factory. If you need a specific derived type, accept a concrete factory instead of an abstract one.
Bad alternatives (anti-patterns):
Adding a method to the interface that does nothing in other derived classed.
Throwing an exception in a method that doesn't make sense for your derived class.
Adding query methods to the interface that tell the user if they can call a certain method.
Unless the method name is generic enough that the user wouldn't expect it to do anything (e.g. DoExtraProcessing), then adding a method that is no-op in most derived classes breaks the contract defined by that interface.
E.g.: Someone invoking bird.Fly() would expect it to actually do something. We know that chickens can't fly. So either a Chicken isn't a Bird, or Birds don't Fly.
Adding query methods is a poor work-around for this. E.g. Adding a boolean CanFly() method or property in your interface. So is throwing an exception. Neither of them get around the fact that the type simply isn't substitutable. Check out the Liskov Substitution Principle (LSP).
For your first question the answer is NO for all your points. If it would be that way then backward compatibility would not make any sense. You have to recompile chunkCode only if you brake the API, that is remove some functionality that chunkCode is using, changing calling conventions, modifying number of parameters, these sort of things == breaking changes.
For the second I usually, but only if I really have to, use dynamic_cast in those situations.
Note my answer is valid in the context of C++;I just saw the question is language agnostic(kind of tired at this hour; I'll remove the answer if it offenses anybody).
Question 1: Depends on what language you are talking about. Its always safer to recompile both languages though. Mostly because chuckCode does not know what actually exists inside A. Recompiling refreshes its memory. But it should work in Java without recompiling.
Question 2: No. The entire point of writing a Factory is to get rid of if(A is type1). These if statements are terrible from maintenance perspective.
Factory is designed to build objects of similar type. If you are having a situation where you are using this statement then that object is either not a similar type to rest of the classes. If you are sure it is of similar type and have similar interfaces. I would write an extra function in all the concrete base classes and implement it only on this one.
Ideally All these concrete classes should have a common abstract base class or a Interface to define what the API is. Nothing other than what is designed in this Interface should be expected to be called anywhere in the code unless you are writing functions that takes this specific class.
This is a rather basic OO question, but one that's been bugging me for some time.
I tend to avoid using the 'private' visibility modifier for my fields and methods in favor of protected.
This is because, generally, I don't see any use in hiding the implementation between base class and child class, except when I want to set specific guidelines for the extension of my classes (i.e. in frameworks). For the majority of cases I think trying to limit how my class will be extended either by me or by other users is not beneficial.
But, for the majority of people, the private modifier is usually the default choice when defining a non-public field/method.
So, can you list use cases for private? Is there a major reason for always using private? Or do you also think it's overused?
There is some consensus that one should prefer composition over inheritance in OOP. There are several reasons for this (google if you're interested), but the main part is that:
inheritance is seldom the best tool and is not as flexible as other solutions
the protected members/fields form an interface towards your subclasses
interfaces (and assumptions about their future use) are tricky to get right and document properly
Therefore, if you choose to make your class inheritable, you should do so conciously and with all the pros and cons in mind.
Hence, it's better not to make the class inheritable and instead make sure it's as flexible as possible (and no more) by using other means.
This is mostly obvious in larger frameworks where your class's usage is beyond your control. For your own little app, you won't notice this as much, but it (inheritance-by-default) will bite you in the behind sooner or later if you're not careful.
Alternatives
Composition means that you'd expose customizability through explicit (fully abstract) interfaces (virtual or template-based).
So, instead of having an Vehicle base class with a virtual drive() function (along with everything else, such as an integer for price, etc.), you'd have a Vehicle class taking a Motor interface object, and that Motor interface only exposes the drive() function. Now you can add and re-use any sort of motor anywhere (more or less. :).
There are two situations where it matters whether a member is protected or private:
If a derived class could benefit from using a member, making the member `protected` would allow it to do so, while making it `private` would deny it that benefit.
If a future version of the base class could benefit by not having the member behave as it does in the present version, making the member `private` would allow that future version to change the behavior (or eliminate the member entirely), while making it `protected` would require all future versions of the class to keep the same behavior, thus denying them the benefit that could be reaped from changing it.
If one can imagine a realistic scenario where a derived class might benefit from being able to access the member, and cannot imagine a scenario where the base class might benefit from changing its behavior, then the member should be protected [assuming, of course, that it shouldn't be public]. If one cannot imagine a scenario where a derived class would get much benefit from accessing the member directly, but one can imagine scenarios where a future version of the base class might benefit by changing it, then it should be private. Those cases are pretty clear and straightforward.
If there isn't any plausible scenario where the base class would benefit from changing the member, I would suggest that one should lean toward making it protected. Some would say the "YAGNI" (You Ain't Gonna Need It) principle favors private, but I disagree. If you're is expecting others to inherit the class, making a member private doesn't assume "YAGNI", but rather "HAGNI" (He's Not Gonna Need It). Unless "you" are going to need to change the behavior of the item in a future version of the class, "you" ain't gonna need it to be private. By contrast, in many cases you'll have no way of predicting what consumers of your class might need. That doesn't mean one should make members protected without first trying to identify ways one might benefit from changing them, since YAGNI isn't really applicable to either decision. YAGNI applies in cases where it will be possible to deal with a future need if and when it is encountered, so there's no need to deal with it now. A decision to make a member of a class which is given to other programmers private or protected implies a decision as to which type of potential future need will be provided for, and will make it difficult to provide for the other.
Sometimes both scenarios will be plausible, in which case it may be helpful to offer two classes--one of which exposes the members in question and a class derived from that which does not (there's no standard idiomatic was for a derived class to hide members inherited from its parent, though declaring new members which have the same names but no compilable functionality and are marked with an Obsolete attribute would have that effect). As an example of the trade-offs involved, consider List<T>. If the type exposed the backing array as a protected member, it would be possible to define a derived type CompareExchangeableList<T> where T:Class which included a member T CompareExchangeItem(index, T T newValue, T oldvalue) which would return Interlocked.CompareExchange(_backingArray[index], newValue, oldValue); such a type could be used by any code which expected a List<T>, but code which knew the instance was a CompareExchangeableList<T> could use the CompareExchangeItem on it. Unfortunately, because List<T> does not expose the backing array to derived classes, it is impossible to define a type which allows CompareExchange on list items but which would still be useable by code expecting a List<T>.
Still, that's not to imply that exposing the backing array would have been completely without cost; even though all extant implementations of List<T> use a single backing array, Microsoft might implement future versions to use multiple arrays when a list would otherwise grow beyond 84K, so as to avoid the inefficiencies associated with the Large Object Heap. If the backing array was exposed as protected member, it would be impossible to implement such a change without breaking any code that relied upon that member.
Actually, the ideal thing might have been to balance those interests by providing a protected member which, given a list-item index, will return an array segment which contains the indicated item. If there's only one array, the method would always return a reference to that array, with an offset of zero, a starting subscript of zero, and a length equal to the list length. If a future version of List<T> split the array into multiple pieces, the method could allow derived classes to efficiently access segments of the array in ways that would not be possible without such access [e.g. using Array.Copy] but List<T> could change the way it manages its backing store without breaking properly-written derived classes. Improperly-written derived classes could get broken if the base implementation changes, but that's the fault of the derived class, not the base.
I just prefer private than protected in the default case because I'm following the principle to hide as much as possibility and that's why set the visibility as low as possible.
I am reaching here. However, I think that the use of Protected member variables should be made conciously, because you not only plan to inherit, but also because there is a solid reason derived classed shouldn't use the Property Setters/Getters defined on the base class.
In OOP, we "encapsulate" the member fields so that we can excercise control over how they properties the represent are accessed and changed. When we define a getter/setter on our base for a member variable, we are essentially saying that THIS is how I want this variable to be referenced/used.
While there are design-driven exceptions in which one might need to alter the behavior created in the base class getter/setter methods, it seems to me that this would be a decision made after careful consideration of alternatives.
For Example, when I find myself needing to access a member field from a derived class directly, instead of through the getter/setter, I start thinking maybe that particular Property should be defined as abstract, or even moved to the derived class. This depends upon how broad the hierarchy is, and any number of additional considerations. But to me, stepping around the public Property defined on the base class begins to smell.
Of course, in many cases, it "doesn't matter" because we are not implementing anything within the getter/setter beyond access to the variable. But again, if this is the case, the derived class can just as easily access through the getter/setter. This also protects against hard-to-find bugs later, if employed consistently. If the behgavior of the getter/setter for a member field on the base class is changed in some way, and a derived class references the Protected field directly, there is the potential for trouble.
You are on the right track. You make something private, because your implementation is dependant on it not being changed either by a user or descendant.
I default to private and then make a conscious decision about whether and how much of the inner workings I'm going to expose, you seem to work on the basis, that it will be exposed anyway, so get on with it. As long as we both remember to cross all the eyes and dot all the tees, we are good.
Another way to look at it is this.
If you make it private, some one might not be able to do what they want with your implementation.
If you don't make it private, someone may be able to do something you really don't want them to do with your implementation.
I've been programming OOP since C++ in 1993 and Java in 1995. Time and again I've seen a need to augment or revise a class, typically adding extra functionality tightly integrated with the class. The OOP way to do so is to subclass the base class and make the changes in the subclass. For example a base class field originally referred to only elsewhere in the base class is needed for some other action, or some other activity must change a value of the field (or one of the field's contained members). If that field is private in the base class then the subclass cannot access it, cannot extend the functionality. If the field is protected it can do so.
Subclasses have a special relationship to the base class that other classes elsewhere in the class hierarchy don't have: they inherit the base class members. The purpose of inheritance is to access base class members; private thwarts inheritance. How is the base class developer supposed to know that no subclasses will ever need to access a member? In some cases that can be clear, but private should be the exception rather than the rule. Developers subclassing the base class have the base class source code, so their alternative is to revise the base class directly (perhaps just changing private status to protected before subclassing). That's not clean, good practice, but that's what private makes you do.
I am a beginner at OOP but have been around since the first articles in ACM and IEEE. From what I remember, this style of development was more for modelling something. In the real world, things including processes and operations would have "private, protected, and public" elements. So to be true to the object .....
Out side of modelling something, programming is more about solving a problem. The issue of "private, protected, and public" elements is only a concern when it relates to making a reliable solution. As a problem solver, I would not make the mistake of getting cough up in how others are using MY solution to solve their own problems. Now keep in mind that a main reason for the issue of ...., was to allow a place for data checking (i.e., verifying the data is in a valid range and structure before using it in your object).
With that in mind, if your code solves the problem it was designed for, you have done your job. If others need your solution to solve the same or a simular problem - Well, do you really need to control how they do it. I would say, "only if you are getting some benefit for it or you know the weaknesses in your design, so you need to protect some things."
In my idea, if you are using DI (Dependency Injection) in your project and you are using it to inject some interfaces in your class (by constructor) to use them in your code, then they should be protected, cause usually these types of classes are more like services not data keepers.
But if you want to use attributes to save some data in your class, then privates would be better.
I use the Scanner class for reading multiple similar files. I would like to extend it to make sure they all use the same delimiter and I can also add methods like skipUntilYouFind(String thisHere) that all valid for them all.
I can make a utility-class that contain them, or embed the Scanner Class as a variable inside another class but this is more cumbersome.
I have found some reasons to declare a class final, but why is it done here?
Probably because extending it and overwriting some of it's methods would probably break it. And making it easier to overwrite methods would expose to much of the inner workings, so if in the future they decide to change those (for performance or some other reasons), it would be harder for them to change the class without breaking all the classes that extend it.
For example, consider the following method in the class:
public boolean nextBoolean() {
clearCaches();
return Boolean.parseBoolean(next(boolPattern()));
}
Say you want to overwrite this because you want to make 'awesome' evaluate to a 'true' boolean (for whatever reason). If you overwrite it, you can't call super.nextBoolean(), since that would consume the next token using the default logic. But if you don't call super.nextBoolean(), clearCaches() won't be called, possibly breaking the other not overwritten methods. You can't call clearCaches() because it's private. If they made it protected, but then realized that it's causing a performance problem, and wanted a new implementation that doesn't clear caches anymore, then they might break your overwritten implementation which would still be calling that.
So basically it's so they can easily change the hidden parts inside the class, which are quite complex, and protecting you from making a broken child class (or a class that could be easily be broken).
I suppose it is due to security reasons. This class reads user input, so that someone with bad intentions could extend it, modify it's behavior and you'd be screwed. If it is final, it is not that easy for the bad guy, because if he makes his own type of Scanner (not java.util.Scanner), the principles of Polymorphism would be broken. See the bad guy can be smart enough to write a bot/script which does this automatically on remote servers... He can even do it by dynamic classloading in compiled application.
I think that the link you provided explains it all.
In your case it seems like you should prefer composition instead of inheritance anyway. You are creating a utility that has some predefined behavior, and that can hide some (or all) of the details of the Scanner class.
I've seen many implementations that used inheritance in order to change a behavior. The end result was usually a monolithic design, and in some cases, a broken contract, and/or broken behavior.
What can be reasons to prevent a class from being inherited? (e.g. using sealed on a c# class)
Right now I can't think of any.
Because writing classes to be substitutably extended is damn hard and requires you to make accurate predictions of how future users will want to extend what you've written.
Sealing your class forces them to use composition, which is much more robust.
How about if you are not sure about the interface yet and don't want any other code depending on the present interface? [That's off the top of my head, but I'd be interested in other reasons as well!]
Edit:
A bit of googling gave the following:
http://codebetter.com/blogs/patricksmacchia/archive/2008/01/05/rambling-on-the-sealed-keyword.aspx
Quoting:
There are three reasons why a sealed class is better than an unsealed class:
Versioning: When a class is originally sealed, it can change to unsealed in the future without breaking compatibility. (…)
Performance: (…) if the JIT compiler sees a call to a virtual method using a sealed types, the JIT compiler can produce more efficient code by calling the method non-virtually.(…)
Security and Predictability: A class must protect its own state and not allow itself to ever become corrupted. When a class is unsealed, a derived class can access and manipulate the base class’s state if any data fields or methods that internally manipulate fields are accessible and not private.(…)
I want to give you this message from "Code Complete":
Inheritance - subclasses - tends to
work against the primary technical
imperative you have as a programmer,
which is to manage complexity.For the sake of controlling complexity, you should maintain a heavy bias against inheritance.
The only legitimate use of inheritance is to define a particular case of a base class like, for example, when inherit from Shape to derive Circle. To check this look at the relation in opposite direction: is a Shape a generalization of Circle? If the answer is yes then it is ok to use inheritance.
So if you have a class for which there can not be any particular cases that specialize its behavior it should be sealed.
Also due to LSP (Liskov Substitution Principle) one can use derived class where base class is expected and this is actually imposes the greatest impact from use of inheritance: code using base class may be given an inherited class and it still has to work as expected. In order to protect external code when there is no obvious need for subclasses you seal the class and its clients can rely that its behavior will not be changed. Otherwise external code needs to be explicitly designed to expect possible changes in behavior in subclasses.
A more concrete example would be Singleton pattern. You need to seal singleton to ensure one can not break the "singletonness".
This may not apply to your code, but a lot of classes within the .NET framework are sealed purposely so that no one tries to create a sub-class.
There are certain situations where the internals are complex and require certain things to be controlled very specifically so the designer decided no one should inherit the class so that no one accidentally breaks functionality by using something in the wrong way.
#jjnguy
Another user may want to re-use your code by sub-classing your class. I don't see a reason to stop this.
If they want to use the functionality of my class they can achieve that with containment, and they will have much less brittle code as a result.
Composition seems to be often overlooked; all too often people want to jump on the inheritance bandwagon. They should not! Substitutability is difficult. Default to composition; you'll thank me in the long run.
I am in agreement with jjnguy... I think the reasons to seal a class are few and far between. Quite the contrary, I have been in the situation more than once where I want to extend a class, but couldn't because it was sealed.
As a perfect example, I was recently creating a small package (Java, not C#, but same principles) to wrap functionality around the memcached tool. I wanted an interface so in tests I could mock away the memcached client API I was using, and also so we could switch clients if the need arose (there are 2 clients listed on the memcached homepage). Additionally, I wanted to have the opportunity to replace the functionality altogether if the need or desire arose (such as if the memcached servers are down for some reason, we could potentially hot swap with a local cache implementation instead).
I exposed a minimal interface to interact with the client API, and it would have been awesome to extend the client API class and then just add an implements clause with my new interface. The methods that I had in the interface that matched the actual interface would then need no further details and so I wouldn't have to explicitly implement them. However, the class was sealed, so I had to instead proxy calls to an internal reference to this class. The result: more work and a lot more code for no real good reason.
That said, I think there are potential times when you might want to make a class sealed... and the best thing I can think of is an API that you will invoke directly, but allow clients to implement. For example, a game where you can program against the game... if your classes were not sealed, then the players who are adding features could potentially exploit the API to their advantage. This is a very narrow case though, and I think any time you have full control over the codebase, there really is little if any reason to make a class sealed.
This is one reason I really like the Ruby programming language... even the core classes are open, not just to extend but to ADD AND CHANGE functionality dynamically, TO THE CLASS ITSELF! It's called monkeypatching and can be a nightmare if abused, but it's damn fun to play with!
From an object-oriented perspective, sealing a class clearly documents the author's intent without the need for comments. When I seal a class I am trying to say that this class was designed to encapsulate some specific piece of knowledge or some specific service. It was not meant to be enhanced or subclassed further.
This goes well with the Template Method design pattern. I have an interface that says "I perform this service." I then have a class that implements that interface. But, what if performing that service relies on context that the base class doesn't know about (and shouldn't know about)? What happens is that the base class provides virtual methods, which are either protected or private, and these virtual methods are the hooks for subclasses to provide the piece of information or action that the base class does not know and cannot know. Meanwhile, the base class can contain code that is common for all the child classes. These subclasses would be sealed because they are meant to accomplish that one and only one concrete implementation of the service.
Can you make the argument that these subclasses should be further subclassed to enhance them? I would say no because if that subclass couldn't get the job done in the first place then it should never have derived from the base class. If you don't like it then you have the original interface, go write your own implementation class.
Sealing these subclasses also discourages deep levels of inheritence, which works well for GUI frameworks but works poorly for business logic layers.
Because you always want to be handed a reference to the class and not to a derived one for various reasons:
i. invariants that you have in some other part of your code
ii. security
etc
Also, because it's a safe bet with regards to backward compatibility - you'll never be able to close that class for inheritance if it's release unsealed.
Or maybe you didn't have enough time to test the interface that the class exposes to be sure that you can allow others to inherit from it.
Or maybe there's no point (that you see now) in having a subclass.
Or you don't want bug reports when people try to subclass and don't manage to get all the nitty-gritty details - cut support costs.
Sometimes your class interface just isn't meant to be inheirited. The public interface just isn't virtual and while someone could override the functionality that's in place it would just be wrong. Yes in general they shouldn't override the public interface, but you can insure that they don't by making the class non-inheritable.
The example I can think of right now are customized contained classes with deep clones in .Net. If you inherit from them you lose the deep clone ability.[I'm kind of fuzzy on this example, it's been a while since I worked with IClonable] If you have a true singelton class, you probably don't want inherited forms of it around, and a data persistence layer is not normally place you want a lot of inheritance.
Not everything that's important in a class is asserted easily in code. There can be semantics and relationships present that are easily broken by inheriting and overriding methods. Overriding one method at a time is an easy way to do this. You design a class/object as a single meaningful entity and then someone comes along and thinks if a method or two were 'better' it would do no harm. That may or may not be true. Maybe you can correctly separate all methods between private and not private or virtual and not virtual but that still may not be enough. Demanding inheritance of all classes also puts a huge additional burden on the original developer to foresee all the ways an inheriting class could screw things up.
I don't know of a perfect solution. I'm sympathetic to preventing inheritance but that's also a problem because it hinders unit testing.
I exposed a minimal interface to interact with the client API, and it would have been awesome to extend the client API class and then just add an implements clause with my new interface. The methods that I had in the interface that matched the actual interface would then need no further details and so I wouldn't have to explicitly implement them. However, the class was sealed, so I had to instead proxy calls to an internal reference to this class. The result: more work and a lot more code for no real good reason.
Well, there is a reason: your code is now somewhat insulated from changes to the memcached interface.
Performance: (…) if the JIT compiler sees a call to a virtual method using a sealed types, the JIT compiler can produce more efficient code by calling the method non-virtually.(…)
That's a great reason indeed. Thus, for performance-critical classes, sealed and friends make sense.
All the other reasons I've seen mentioned so far boil down to "nobody touches my class!". If you're worried someone might misunderstand its internals, you did a poor job documenting it. You can't possibly know that there's nothing useful to add to your class, or that you already know every imaginable use case for it. Even if you're right and the other developer shouldn't have used your class to solve their problem, using a keyword isn't a great way of preventing such a mistake. Documentation is. If they ignore the documentation, their loss.
Most of answers (when abstracted) state that sealed/finalized classes are tool to protect other programmers against potential mistakes. There is a blurry line between meaningful protection and pointless restriction. But as long as programmer is the one who is expected to understand the program, I see no hardly any reasons to restrict him from reusing parts of a class. Most of you talk about classes. But it's all about objects!
In his first post, DrPizza claims that designing inheritable class means anticipating possible extensions. Do I get it right that you think that class should be inheritable only if it's likely to be extended well? Looks as if you were used to design software from the most abstract classes. Allow me a brief explanation of how do I think when designing:
Starting from the very concrete objects, I find characteristics and [thus] functionality that they have in common and I abstract it to superclass of those particular objects. This is a way to reduce code duplicity.
Unless developing some specific product such as a framework, I should care about my code, not others (virtual) code. The fact that others might find it useful to reuse my code is a nice bonus, not my primary goal. If they decide to do so, it's their responsibility to ensure validity of extensions. This applies team-wide. Up-front design is crucial to productivity.
Getting back to my idea: Your objects should primarily serve your purposes, not some possible shoulda/woulda/coulda functionality of their subtypes. Your goal is to solve given problem. Object oriented languages uses fact that many problems (or more likely their subproblems) are similar and therefore existing code can be used to accelerate further development.
Sealing a class forces people who could possibly take advantage of existing code WITHOUT ACTUALLY MODIFYING YOUR PRODUCT to reinvent the wheel. (This is a crucial idea of my thesis: Inheriting a class doesn't modify it! Which seems quite pedestrian and obvious, but it's being commonly ignored).
People are often scared that their "open" classes will be twisted to something that can not substitute its ascendants. So what? Why should you care? No tool can prevent bad programmer from creating bad software!
I'm not trying to denote inheritable classes as the ultimately correct way of designing, consider this more like an explanation of my inclination to inheritable classes. That's the beauty of programming - virtually infinite set of correct solutions, each with its own cons and pros. Your comments and arguments are welcome.
And finally, my answer to the original question: I'd finalize a class to let others know that I consider the class a leaf of the hierarchical class tree and I see absolutely no possibility that it could become a parent node. (And if anyone thinks that it actually could, then either I was wrong or they don't get me).