I'm building a stored procedure. This stored procedure needs to insert a record if a record with a specific value does not exist. If the value does exist, I need to update the record. The problem I'm having is determining if a record with the given value exists or not. I am using the following code:
DECLARE #record1ID as char(36)
SET #record1ID = (SELECT TOP 1 ID FROM Person WHERE [Role]='Manager')
DECLARE #record2ID as char(36)
SET #record2ID = (SELECT TOP 1 d.ID FROM Department d WHERE d.[ManagerID]=#record1ID)
-- If #record2ID is set update record, otherwise add record
-- how do I setup this if/else statement?
Thank you!
If this were a SQL Server as it looks like, you could do a count like this:
declare #rec_counter as int
set #rec_counter = 0
select #rec_counter = count(*) FROM Department d WHERE d.[ManagerID]=#record1
if (#rec_counter > 0)
begin
-- do whatever here
end
IF (EXISTS YOUR_SELECT)
BEGIN ...
or
IF (#record2ID IS NULL)
BEGIN ...
or use select count(*) instead of selecting a value
Related
I have something like the table below:
CREATE TABLE updates (
id INT PRIMARY KEY IDENTITY (1, 1),
name VARCHAR (50) NOT NULL,
updated DATETIME
);
And I'm updating it like so:
INSERT INTO updates (name, updated)
VALUES
('fred', '2020-11-11),
('fred', '2020-11-11'),
...
('bert', '2020-11-11');
I need to write an after update Trigger and enumerate all the name(s) that were added and add each one to another table but can't work out how enumerate each one.
EDIT: - thanks to those who pointed me in the right direction, I know very little SQL.
What I need to do is something like this
foreach name in inserted
look it up in another table and
retrieve a count of the updates a 'name' has done
add 1 to the count
and update it back into the other table
I can't get to my laptop at the moment, but presumably I can do something like:
BEGIN
SET #count = (SELECT UCount from OTHERTAB WHERE name = ins.name)
SET #count = #count + 1
UPDATE OTHERTAB SET UCount = #count WHERE name = ins.name
SELECT ins.name
FROM inserted ins;
END
and that would work for each name in the update?
Obviously I'll have to read up on set based SQL processing.
Thanks all for the help and pointers.
Based on your edits you would do something like the following... set based is a mindset, so you don't need to compute the count in advance (in fact you can't). It's not clear whether you are counting in the same table or another table - but I'm sure you can work it out.
Points:
Use the Inserted table to determine what rows to update
Use a sub-query to calculate the new value if its a second table, taking into account the possibility of null
If you are really using the same table, then this should work
BEGIN
UPDATE OTHERTAB SET
UCount = COALESCE(UCount,0) + 1
WHERE [name] in (
SELECT I.[name]
FROM Inserted I
);
END;
If however you are using a second table then this should work:
BEGIN
UPDATE OTHERTAB SET
UCount = COALESCE((SELECT UCount+1 from OTHERTAB T2 WHERE T2.[name] = OTHERTAB.[name]),0)
WHERE [name] in (
SELECT I.[name]
FROM Inserted I
);
END;
Using inserted and set-based approach(no need for loop):
CREATE TRIGGER trg
ON updates
AFTER INSERT
AS
BEGIN
INSERT INTO tab2(name)
SELECT name
FROM inserted;
END
I have a production issue basically when more than 1 user being approved at the same time. The company code for the users are the same. It is supposed to be unique. Even when i try to use begin tran and with no lock, there is still a probability that the community code can still be duplicated. Because the select statement will give the same amount and hold before updating the table. Is there any possible way i can counter this. Here is the script. Thank you.
declare #currentcompanycode as nvarchar(128)
begin tran
set #currentcompanycode = (select max(companycode) from tb_company with (nolock))
update tb_company set companycode = #currentcompanycode + 1 where companyid = #companyid
commit tran
Make company code an auto increment column and let the database do the work.
You need to hold on to a lock on the tb_company table when you first select it's MAX(companycode), until you've performed the UPDATE based on the value you selected:
set #currentcompanycode =
(select max(companycode) from tb_company with (HOLDLOCK, TABLOCKX))
use the OUTPUT clause
declare #newcompanycode table
(
companycode int
)
update tb_company
set companycode = companycode + 1
output inserted.companycode
into #newcompanycode
where . . .
select * from #newcompanycode
I have a table called tbl_gallery which has a column of datatype bit called isActive.
When the user updates the IsActive value, other rows with IsActive = true will be automatically turned to false.
How can do it with updated trigger?
Please help
I think you want something like:
CREATE TRIGGER trgGalleryActive
ON dbo.tbl_gallery
FOR UPDATE
AS
BEGIN
UPDATE g
-- Update all other gallery rows for this same user to false
SET g.IsActive = 0
FROM tbl_gallery g
INNER JOIN inserted i
on g.UserPK = i.UserPK
WHERE
-- However, we don't want current inserted records to be updated
g.TablePK <> i.TablePK
-- As per Marc's comment - don't update existing inactive rows unnecessarily
AND g.IsActive = 1
-- Only if this record is active should any of this happen
AND i.IsActive = 1
END
Trigger for update second table after updated first table :
CREATE TRIGGER update_table_cityUpdated_afterTable_cityUpdate
ON Table_city
AFTER UPDATE AS
BEGIN
DECLARE #cityId AS BIGINT
DECLARE #stateId AS BIGINT
DECLARE #CityName AS NVARCHAR(200)
SELECT #cityId=cityId FROM INSERTED
SELECT #stateId= stateId FROM INSERTED
SELECT #CityName= CityName FROM INSERTED
UPDATE table_cityUpdated
SET
[dbo].[table_cityUpdated].stateId=#stateId,
[dbo].[table_cityUpdated].CityName=#CityName
WHERE [dbo].[table_cityUpdated].cityId=#cityId
END
;
BEGIN
IF EXISTS(SELECT * FROM Table1 WHERE ID=#ID)
BEGIN
UPDATE Table1 SET Name=#Name WHERE ID=#ID
SELECT '1'
END
ELSE
SELECT '0'
END
Is this the row no. of the table or what ?
Also "IF EXISTS" is checking what ? the table or if the ID exists or not ??
It looks like whoever wrote that Stored Procedure is using that as a return value to indicate success or failure.
Doing things that way will result in a single row with a single column being returned for each call to the procedure.
The correct way to handle this would be to actually use the return value of the stored procedure, rather than returning the single column single row:
BEGIN
IF EXISTS(SELECT * FORM Table1 WHERE ID = #ID)
BEGIN
UPDATE Table1 SET Name = #Name WHERE ID = #ID
RETURN 1
END
RETURN 0
END
The IF EXISTS is checking if there is a row in Table1 with the given ID. If there is a row it will update that row with the given name. The Select "1" will return "1" and Select "0" returns "0". The "1" or "0" would indicate if the row was found or not.
Presumably some calling code checks this value to determine if a row was updated or not.
Rather than checking and updating (two table accesses) you might as well do this.
UPDATE Table1 SET Name=#Name WHERE ID=#ID
SELECT CASE WHEN ##Rowcount = 0 THEN 0 ELSE 1 END
If id is the PK then you can just do
UPDATE Table1 SET Name=#Name WHERE ID=#ID
SELECT ##Rowcount
Note as long as SET NOCOUNT is not on then the number of rows affected will get passed back to the client application anyway.
Select '1' is used to indicate that Table1 contains the id value #ID (a parameter) was updated. Select '0' indicates that Table1 does not contain the id value #ID.
If there's:
IF UPDATE (col1)
...in the SQL server trigger on a table, does it return true only if col1 has been changed or been updated?
I have a regular update query like
UPDATE table-name
SET col1 = 'x',
col2 = 'y'
WHERE id = 999
Now what my concern is if the "col1" was 'x' previously then again we updated it to 'x'
would IF UPDATE ("col1") trigger return True or not?
I am facing this problem as my save query is generic for all columns, but when I add this condition it returns True even if it's not changed...So I am concerned what to do in this case if I want to add condition like that?
It returns true if a column was updated. An update means that the query has SET the value of the column. Whether the previous value was the same as the new value is largely irelevant.
UPDATE table SET col = col
it's an update.
UPDATE table SET col = 99
when the col already had value 99 also it's an update.
Within the trigger, you have access to two internal tables that may help. The 'inserted' table includes the new version of each affected row, The 'deleted' table includes the original version of each row. You can compare the values in these tables to see if your field value was actually changed.
Here's a quick way to scan the rows to see if ANY column changed before deciding to run the contents of a trigger. This can be useful for example when you want to write a history record, but you don't want to do it if nothing really changed.
We use this all the time in ETL importing processes where we may re-import data but if nothing really changed in the source file we don't want to create a new history record.
CREATE TRIGGER [dbo].[TR_my_table_create_history]
ON [dbo].[my_table] FOR UPDATE AS
BEGIN
--
-- Insert the old data row if any column data changed
--
INSERT INTO [my_table_history]
SELECT d.*
FROM deleted d
INNER JOIN inserted i ON i.[id] = d.[id]
--
-- Use INTERSECT to see if anything REALLY changed
--
WHERE NOT EXISTS( SELECT i.* INTERSECT SELECT d.* )
END
Note that this particular trigger assumes that your source table (the one triggering the trigger) and the history table have identical column layouts.
What you do is check for different values in the inserted and deleted tables rather than use updated() (Don't forget to account for nulls). Or you could stop doing unneeded updates.
Trigger:
CREATE TRIGGER boo ON status2 FOR UPDATE AS
IF UPDATE (id)
BEGIN
SELECT 'DETECT';
END;
Usage:
UPDATE status2 SET name = 'K' WHERE name= 'T' --no action
UPDATE status2 SET name = 'T' ,id= 8 WHERE name= 'K' --detect
To shortcut the "No actual update" case, you need also check at the beginning whether your query affected any rows at all:
set nocount on; -- this must be the first statement!
if not exists (select 1 from inserted) and not exists (select 1 from deleted)
return;
SET NOCOUNT ON;
declare #countTemp int
select #countTemp = Count (*) from (
select City,PostCode,Street,CountryId,Address1 from Deleted
union
select City,PostCode,Street,CountryId,Address1 from Inserted
) tempTable
IF ( #countTemp > 1 )
Begin
-- Your Code goes Here
End
-- if any of these "City,PostCode,Street,CountryId,Address1" got updated then trigger
-- will work in " IF ( #countTemp > 1 ) " Code)
This worked for me
DECLARE #LongDescDirty bit = 0
Declare #old varchar(4000) = (SELECT LongDescription from deleted)
Declare #new varchar(4000) = (SELECT LongDescription from inserted)
if (#old <> #new)
BEGIN
SET #LongDescDirty = 1
END
Update table
Set LongDescUpdated = #LongDescUpdated
.....