I have a MySQL table with 3 fields:
Location
Variable
Value
I frequently use the following query:
SELECT *
FROM Table
WHERE Location = '$Location'
AND Variable = '$Variable'
ORDER BY Location, Variable
I have over a million rows in my table and queries are somewhat slow. Would it increase query speed if I added a field VariableLocation, which is the Variable and the Location combined? I would be able to change the query to:
SELECT *
FROM Table
WHERE VariableLocation = '$Location$Variable'
ORDER BY VariableLocation
I would add a covering index, for columns location and variable:
ALTER TABLE
ADD INDEX (variable, location);
...though if the variable & location pairs are unique, they should be the primary key.
Combining the columns will likely cause more grief than it's worth. For example, if you need to pull out records by location or variable only, you'd have to substring the values in a subquery.
Try adding an index which covers the two fields you should then still get a performance boost but also keep your data understandable because it wouldn't seem like the two columns should be combine but you are just doing it to get performance.
I would advise against combining the fields. Instead, create an index that covers both fields in the same order as your ORDER BY clause:
ALTER TABLE tablename ADD INDEX (location, variable);
Combined indices and keys are only used in queries that involve all fields of the index or a subset of these fields read from left to right. Or in other words: If you use location in a WHERE condition, this index would be used, but ordering by variable would not use the index.
When trying to optimize queries, the EXPLAIN command is quite helpful: EXPLAIN in mysql docs
Correction Update:
Courtesy: #paxdiablo:
A column in the table will make no difference. All you need is an index over both columns and the MySQL engine will use that. Adding a column in the table is actually worse than that since it breaks 3NF and wastes space. See http://dev.mysql.com/doc/refman/5.0/en/mysql-indexes.html which states: SELECT * FROM tbl_name WHERE col1=val1 AND col2=val2; If a multiple-column index exists on col1 and col2, the appropriate rows can be fetched directly.
Related
I am not db guy. But I need to create tables and do CRUD operations on them. I get confused should I create the index on all columns by default
or not? Here is my understanding which I consider while creating index.
Index basically contains the memory location range ( starting memory location where first value is stored to end memory location where last value is
stored). So when we insert any value in table index for column needs to be updated as it has got one more value but update of column
value wont have any impact on index value. Right? So bottom line is when my column is used in join between two tables we should consider
creating index on column used in join but all other columns can be skipped because if we create index on them it will involve extra cost of
updating index value when new value is inserted in column.Right?
Consider this scenario where table mytable contains two three columns i.e col1,col2,col3. Now we fire this query
select col1,col2 from mytable
Now there are two cases here. In first case we create the index on col1 and col2. In second case we don't create any index.** As per my understanding
case 1 will be faster than case2 because in case 1 we oracle can quickly find column memory location. So here I have not used any join columns but
still index is helping here. So should I consider creating index here or not?**
What if in the same scenario above if we fire
select * from mytable
instead of
select col1,col2 from mytable
Will index help here?
Don't create Indexes in every column! It will slow things down on insert/delete/update operations.
As a simple reminder, you can create an index in columns that are common in WHERE, ORDER BY and GROUP BY clauses. You may consider adding an index in colums that are used to relate other tables (through a JOIN, for example)
Example:
SELECT col1,col2,col3 FROM my_table WHERE col2=1
Here, creating an index on col2 would help this query a lot.
Also, consider index selectivity. Simply put, create index on values that has a "big domain", i.e. Ids, names, etc. Don't create them on Male/Female columns.
but update of column value wont have any impact on index value. Right?
No. Updating an indexed column will have an impact. The Oracle 11g performance manual states that:
UPDATE statements that modify indexed columns and INSERT and DELETE
statements that modify indexed tables take longer than if there were
no index. Such SQL statements must modify data in indexes and data in
tables. They also create additional undo and redo.
So bottom line is when my column is used in join between two tables we should consider creating index on column used in join but all other columns can be skipped because if we create index on them it will involve extra cost of updating index value when new value is inserted in column. Right?
Not just Inserts but any other Data Manipulation Language statement.
Consider this scenario . . . Will index help here?
With regards to this last paragraph, why not build some test cases with representative data volumes so that you prove or disprove your assumptions about which columns you should index?
In the specific scenario you give, there is no WHERE clause, so a table scan is going to be used or the index scan will be used, but you're only dropping one column, so the performance might not be that different. In the second scenario, the index shouldn't be used, since it isn't covering and there is no WHERE clause. If there were a WHERE clause, the index could allow the filtering to reduce the number of rows which need to be looked up to get the missing column.
Oracle has a number of different tables, including heap or index organized tables.
If an index is covering, it is more likely to be used, especially when selective. But note that an index organized table is not better than a covering index on a heap when there are constraints in the WHERE clause and far fewer columns in the covering index than in the base table.
Creating indexes with more columns than are actually used only helps if they are more likely to make the index covering, but adding all the columns would be similar to an index organized table. Note that Oracle does not have the equivalent of SQL Server's INCLUDE (COLUMN) which can be used to make indexes more covering (it's effectively making an additional clustered index of only a subset of the columns - useful if you want an index to be unique but also add some data which you don't want to be considered in the uniqueness but helps to make it covering for more queries)
You need to look at your plans and then determine if indexes will help things. And then look at the plans afterwards to see if they made a difference.
I am running following query.
SELECT Table_1.Field_1,
Table_1.Field_2,
SUM(Table_1.Field_5) BALANCE_AMOUNT
FROM Table_1, Table_2
WHERE Table_1.Field_3 NOT IN (1, 3)
AND Table_2.Field_2 <> 2
AND Table_2.Field_3 = 'Y'
AND Table_1.Field_1 = Table_2.Field_1
AND Table_1.Field_4 = '31-oct-2011'
GROUP BY Table_1.Field_1, Table_1.Field_2;
I have created index for columns (Field_1,Field_2,Field_3,Field_4) of Table_1 but the index is not getting used.
If I remove the SUM(Table_1.Field_5) from select clause then index is getting used.
I am confused if optimizer is not using this index or its because of SUM() function I have used in query.
Please share your explaination on the same.
When you remove the SUM you also remove field_5 from the query. All the data needed to answer the query can then be found in the index, which may be quicker than scanning the table. If you added field_5 to the index the query with SUM might use the index.
If your query is returning the large percentage of table's rows, Oracle may decide that doing a full table scan is cheaper than "hopping" between the index and the table's heap (to get the values in Table_1.Field_5).
Try adding Table_1.Field_5 to the index (thus covering the whole query with the index) and see if this helps.
See the Index-Only Scan: Avoiding Table Access at Use The Index Luke for conceptual explanation of what is going on.
As you mentioned, the presence of the summation function results in the the Index being overlooked.
There are function based indexes:
A function-based index includes columns that are either transformed by a function, such as the UPPER function, or included in an expression, such as col1 + col2.
Defining a function-based index on the transformed column or expression allows that data to be returned using the index when that function or expression is used in a WHERE clause or an ORDER BY clause. Therefore, a function-based index can be beneficial when frequently-executed SQL statements include transformed columns, or columns in expressions, in a WHERE or ORDER BY clause.
However, as with all, function based indexes have their restrictions:
Expressions in a function-based index cannot contain any aggregate functions. The expressions must reference only columns in a row in the table.
Though I see some good answers here couple of important points are being missed -
SELECT Table_1.Field_1,
Table_1.Field_2,
SUM(Table_1.Field_5) BALANCE_AMOUNT
FROM Table_1, Table_2
WHERE Table_1.Field_3 NOT IN (1, 3)
AND Table_2.Field_2 <> 2
AND Table_2.Field_3 = 'Y'
AND Table_1.Field_1 = Table_2.Field_1
AND Table_1.Field_4 = '31-oct-2011'
GROUP BY Table_1.Field_1, Table_1.Field_2;
Saying that having SUM(Table_1.Field_5) in select clause causes index not to be used in not correct. Your index on (Field_1,Field_2,Field_3,Field_4) can still be used. But there are problems with your index and sql query.
Since your index is only on (Field_1,Field_2,Field_3,Field_4) even if your index gets used DB will have to access the actual table row to fetch Field_5 for applying filter. Now it completely depends on the execution plan charted out of sql optimizer which one is cost effective. If SQL optimizer figures out that full table scan has less cost than using index it will ignore the index. Saying so I will now tell you probable problems with your index -
As others have states you could simply add Field_5 to the index so that there is no need for separate table access.
Your order of index matters very much for performance. For eg. in your case if you give order as (Field_4,Field_1,Field_2,Field_3) then it will be quicker since you have equality on Field_4 -Table_1.Field_4 = '31-oct-2011'. Think of it this was -
Table_1.Field_4 = '31-oct-2011' will give you less options to choose final result from then Table_1.Field_3 NOT IN (1, 3). Things might change since you are doing a join. It's always best to see the execution plan and design your index/sql accordingly.
I need help understanding how to create indexes. I have a table that looks like this
Id
Name
Age
Location
Education,
PhoneNumber
My query looks like this:
SELECT *
FROM table1
WHERE name = 'sam'
What's the correct way to create an index for this with included columns?
What if the query has a order by statement?
SELECT *
FROM table1
WHERE name = 'sam'
ORDER BY id DESC
What if I have 2 parameters in my where statement?
SELECT *
FROM table1
WHERE name = 'sam'
AND age > 12
The correct way to create an index with included columns? Either via Management Studio/Toad/etc, or SQL (documentation):
CREATE INDEX idx_table_1 ON db.table_1 (name) INCLUDE (id)
What if the Query has an ORDER BY
The ORDER BY can use indexes, if the optimizer sees fit to (determined by table statistics & query). It's up to you to test if a composite index or an index with INCLUDE columns works best by reviewing the query cost.
If id is the clustered key (not always the primary key though), I probably wouldn't INCLUDE the column...
What if I have 2 parameters in my where statement?
Same as above - you need to test what works best for your query. Might be composite, or include, or separate indexes.
But keep in mind that:
tweaking for one query won't necessarily benefit every other query
indexes do slow down INSERT/UPDATE/DELETE statements, and require maintenance
You can use the Database Tuning Advisor (DTA) for index recommendations, including when some are redundant
Recommended reading
I highly recommend reading Kimberly Tripp's "The Tipping Point" for a better understanding of index decisions and impacts.
Since I do not know which exactly tasks your DB is going to implement and how many records in it, I would suggest that you take a look at the Index Basics MSDN article. It will allow you to decide yourself which indexes to create.
If ID is your primary and/or clustered index key, just create an index on Name, Age. This will cover all three queries.
Included fields are best used to retrieve row-level values for columns that are not in the filter list, or to retrieve aggregate values where the sorted field is in the GROUP BY clause.
If inserts are rare, create as much indexes as You want.
For first query create index for name column.
Id column I think already is primary key...
Create 2nd index with name and age. You can keep only one index: 'name, ag'e and it will not be much slower for 1st query.
The WHERE clause of one of my queries looks like this:
and tbl0.Type = 'Alert'
AND (tbl0.AccessRights like '%'+TblCUG0.userGroup+'%'
or tbl0.AccessRights like 'All' )
AND (tbl0.ExpiryDate > CONVERT(varchar(8), GETDATE(), 1)
or tbl0.ExpiryDate is null)
order by tbl0.Priority,tbl0.PublishedDate desc, tbl0.Title asc
I will like to know on which columns can I create indexes and which type of index will best suit. Also I have heard that indexes dont work with Like and Wild cards at the starting. So what should be the approach to optimize the queries.
1 and tbl0.Type = 'Alert'
2 AND (tbl0.AccessRights like '%'+TblCUG0.userGroup+'%'
3 or tbl0.AccessRights like 'All' )
4 AND (tbl0.ExpiryDate > CONVERT(varchar(8), GETDATE(), 1)
5 or tbl0.ExpiryDate is null)
most likely, you will not be able to use an index with a WHERE clause like this.
Line 1, You could create an index on tbl0.Type, but if you have many rows and few actual values, SQL Server will just skip the index and table scan anyway. Also, having nothing to do with the index issue, a column like this, a code/flag value is better as a fixed width value char(1), tiny int, etc, where "A"=alert or 1=alert. I would name the column XyzType, where Xyz is what the type describes (DoctorType, CarType, etc). I would create a new table XyzTye, with a FK back to this column in tb10. this new table would have two columns XyzType PK and XyzDescription, where you expand out the name.
Line 2, are you combining multiple values into tbl0.AccessRights? and trying to use the LIKE to find values within it? if so, split this out into a different table and then you can remove the like and possibly add an index there.
Line 3, OR kills an index usage. Imagine looking through the phone book for all names that are "Smith" or start with "G", you can't just use the index. You may try splitting the query into a UNION or UNION ALL around the OR so an index can be used (one part looks for "Smith" and the other part looks for "G"). You have not provided enough of the query to determine if this is possible or not in your case. You many need to use a derived table that contains this UNION so you can join it to the rest of your query.
Line 4, tbl0.ExpiryDate could benifit from a index, but the or will kill its usage, see the Line 3 comment.
Line 5, you may try the OR union trick discussed above, or just not use NULL, put in a a default like '01/01/3000' so you don't need the OR.
SQL Server's Database Tuning Advisor can suggest which indexes will optimize your query, including covering indexes that will optimize the selected columns that you do not include in your query. Just because you add an index doesn't mean that the query optimizer will use it. Some indexes may cost more to use than others, so the optimizer will choose the bext indexes using the underlying tables' statistics.
Out-of-hand you could use add all ordering and criteria columns to an index, but that would be useless if for example, there are too few distinct Priority values to make it worth the storage.
You are right about LIKE and wildcards. An index is a btree which means that it can speed quick searches for specific values or range queries. A wildcard at the beginning means that the query will have to touch all records to check whether they match the pattern. A wildcard at the end means that the query will only have to touch items that start with the substring up to the wildcard, partially turning this into a range query that can benefit from an index.
I've just heard the term covered index in some database discussion - what does it mean?
A covering index is an index that contains all of, and possibly more, the columns you need for your query.
For instance, this:
SELECT *
FROM tablename
WHERE criteria
will typically use indexes to speed up the resolution of which rows to retrieve using criteria, but then it will go to the full table to retrieve the rows.
However, if the index contained the columns column1, column2 and column3, then this sql:
SELECT column1, column2
FROM tablename
WHERE criteria
and, provided that particular index could be used to speed up the resolution of which rows to retrieve, the index already contains the values of the columns you're interested in, so it won't have to go to the table to retrieve the rows, but can produce the results directly from the index.
This can also be used if you see that a typical query uses 1-2 columns to resolve which rows, and then typically adds another 1-2 columns, it could be beneficial to append those extra columns (if they're the same all over) to the index, so that the query processor can get everything from the index itself.
Here's an article: Index Covering Boosts SQL Server Query Performance on the subject.
Covering index is just an ordinary index. It's called "covering" if it can satisfy query without necessity to analyze data.
example:
CREATE TABLE MyTable
(
ID INT IDENTITY PRIMARY KEY,
Foo INT
)
CREATE NONCLUSTERED INDEX index1 ON MyTable(ID, Foo)
SELECT ID, Foo FROM MyTable -- All requested data are covered by index
This is one of the fastest methods to retrieve data from SQL server.
Covering indexes are indexes which "cover" all columns needed from a specific table, removing the need to access the physical table at all for a given query/ operation.
Since the index contains the desired columns (or a superset of them), table access can be replaced with an index lookup or scan -- which is generally much faster.
Columns to cover:
parameterized or static conditions; columns restricted by a parameterized or constant condition.
join columns; columns dynamically used for joining
selected columns; to answer selected values.
While covering indexes can often provide good benefit for retrieval, they do add somewhat to insert/ update overhead; due to the need to write extra or larger index rows on every update.
Covering indexes for Joined Queries
Covering indexes are probably most valuable as a performance technique for joined queries. This is because joined queries are more costly & more likely then single-table retrievals to suffer high cost performance problems.
in a joined query, covering indexes should be considered per-table.
each 'covering index' removes a physical table access from the plan & replaces it with index-only access.
investigate the plan costs & experiment with which tables are most worthwhile to replace by a covering index.
by this means, the multiplicative cost of large join plans can be significantly reduced.
For example:
select oi.title, c.name, c.address
from porderitem poi
join porder po on po.id = poi.fk_order
join customer c on c.id = po.fk_customer
where po.orderdate > ? and po.status = 'SHIPPING';
create index porder_custitem on porder (orderdate, id, status, fk_customer);
See:
http://literatejava.com/sql/covering-indexes-query-optimization/
Lets say you have a simple table with the below columns, you have only indexed Id here:
Id (Int), Telephone_Number (Int), Name (VARCHAR), Address (VARCHAR)
Imagine you have to run the below query and check whether its using index, and whether performing efficiently without I/O calls or not. Remember, you have only created an index on Id.
SELECT Id FROM mytable WHERE Telephone_Number = '55442233';
When you check for performance on this query you will be dissappointed, since Telephone_Number is not indexed this needs to fetch rows from table using I/O calls. So, this is not a covering indexed since there is some column in query which is not indexed, which leads to frequent I/O calls.
To make it a covered index you need to create a composite index on (Id, Telephone_Number).
For more details, please refer to this blog:
https://www.percona.com/blog/2006/11/23/covering-index-and-prefix-indexes/