I have a database in MS-Access which has field names as "1", "2", "3", ... "10".
I want to select column 1 then when I click a button, column 2, column 3, ... and so on.
How to do that?
Actually i want to make a project in JSP.
Those are impractical field names, but you can use brackets to use them in a query:
select [1] from SomeTable where SomeId = 42
A basic rule for designing databases is that data should be in the field values, not in the field names. You should consider redesigning the table so that you store the values in separate rows instead, and have a field that specifies which item is stored in the row:
select Value from SomeTable where SomeId = 42 and ValueType = 1
This will enable you to use a parameterised query instead of creating the query dynamically.
Also, this way you don't have empty fields if you use less than ten items, and the database design doesn't limit you to only ten items.
Suppose I have a table like this
id name
1 name1
2 name2
3 name3
4 name4
5 name5
Now suppose I want to choose record 1 when button 1 is clicked, second record when button 2 is clicked and so on.
So I will write a query like
select * from MyTbl where id = #btnId .
Note:- #btnId will have the value 1 for Button 1, 2 for Button 2 etc.
Or you can use case statement.
This is just an idea for accomplishing the work but as others mentioned, you should be more specific for an accurate answer.
Related
Problem
I've got a dropdown list, which shows all the Article_Group_ID's that are linked to a specific brand, using the following Query:
SELECT TbArticle.Article_Group_ID, TbArticle.Article_Brand_ID
FROM TbArticle
GROUP BY TbArticle.Article_Group_ID, TbArticle.Article_Brand_ID,
HAVING (((TbArticle.Article_Brand_ID)=1))
This works as expected, it returns the following:
Query results
Article_Brand_ID
Article_Group_ID
1
1
1
2
But, if a user does not wish to specify a specific Article_Brand_ID, the query results look like this:
Query
Article_Brand_ID
Article_Group_ID
1
1
2
1
3
1
1
2
As you can see, the same Article_Group_ID is returned three times. Because of this, the user now sees the same group three times, instead of just once. If I were to remove the Article_Brand_ID from the query, the results would look like this:
Article_Group_ID
1
2
Is there any way to achieve the same behavior, by "ignoring" the Article_Brand_ID column, if it's WHERE clause is not set?
Database layout
TbArticle
Article_Brand_ID
Article_Group_ID
1
1
2
1
3
1
1
2
A single query cannot return a variable number of columns. So, strictly speaking you cannot do what you want with a single query. However, if you are willing to accept the second column as NULL when the brand is not provided, then you can adjust the aggregation.
Let me denote the parameter by ?:
SELECT a.Article_Group_ID,
IIF(? IS NOT NULL, a.Article_Brand_ID, NULL) as Article_Brand_ID
FROM TbArticle as a
WHERE a.Article_Brand_ID = ? OR
? IS NULL
GROUP BY a.Article_Group_ID,
IIF(? IS NOT NULL, a.Article_Brand_ID, NULL);
Note: It is usually better to filter before aggregating (i.e. using WHERE) rather than filtering afterwards (i.e. using HAVING).
I am pulling data and when I pull in the text field my results for the "distinct ID" are sometimes being duplicated when there are multiple results for that ID. Is there a way to concatenate the results into a single column/row rather than having them duplicated?
It looks like there are ways in other SQL platforms but I have not been able to find something that works in HANA.
Example
Select
Distinct ID
From Table1
If I pull only Distinct ID I get the following:
ID
1
2
3
4
However when I pull the following:
Example
Select
Distinct ID,Text
From Table1
I get something like
ID
Text
1
Dog
2
Cat
2
Dog
3
Fish
4
Bird
4
Horse
I am trying to Concat the Text field when there is more than 1 row for each ID.
What I need the results to be (Having a "break" between results so that they are on separate lines would be even better but at least a "," would work):
ID
Text
1
Dog
2
Cat,Dog
3
Fish
4
Bird,Horse
I see Kiran has just referred to another valid answer in the comment, but in your example this would work.
SELECT ID, STRING_AGG(Text, ',')
FROM TABLE1
GROUP BY ID;
You can replace the ',' with other characters, maybe a '\n' for a line break
I would caution against the approach to concatenate rows in this way, unless you know your data well. There is no effective limit to the rows and length of the string that you will generate, but HANA will have a limit on string length, so consider that.
I need some help on this one. I have a query that I need to make work but I need to limit it by the results of another query.
SELECT ItemID, ItemNums
FROM dbo.Tables
ItemNums is a varchar field that is used to store the strings of the various item numbers.
This produces the following.
ItemID ItemNums
1 1, 4, 5
2 1, 3, 4, 5
3 2
4 4
5 1
I have another table that has each item number as an INT that I need to use to pull all ItemIDs that have the associated ItemNums
Something like this.
SELECT *
FROM dbo.Tables
WHERE ItemNums IN (4,5)
Any help would be appreciated.
If possible, you should change your database schema. In general, it's not good to store comma delimited lists in a relational database.
However, if that's not an option, here's one way using a join with like:
select *
from dbo.Tables t
join dbo.SecondTable st on ', '+t.ItemNums+',' like '%, '+st.ItemNumId+',%'
This concatenates commas to the beginning and end of the itemnums to ensure you only match on the specific ids.
I personally would recommend normalizing your dbo.tables.
It would be better as:
ItemID ItemNums
1 1
1 4
1 5
2 1
etc.
Then you can use a join or a sub query to pull out the rows with ItemNums in some list.
Otherwise, it's going to be a mess and not very fast.
Lets say I have a schema:
key STRING NULLABLE
values INTEGER REPEATED
Now, please note that second column is a repeated field of integers,
Lets say the data is something like:
key:'abc'
values: 1 2 3 (3 separate values, same for below values)
key:'def'
values: 1 2 5
key:'ghi'
values: 1 6 9
And here I wish to find out keys which has values 1 and 2 ? Expecting 'abc' and 'def' as result set.
Looking for a query for this. I want an 'and' ('in' does not work here). I need those both values to be present for any key to return as result.
SELECT
key,
SUM(values = 1 or values = 2) WITHIN RECORD AS check
FROM yourtable
HAVING check = 2
I have a database table of my own that I am trying to construct a query for that seems simple enough, but I feel like I am messing up somewhere because the results are not what they should be.
I basically have a table that is like the following:
Table: Data
Columns:
Row ID Profile Import ID Field ID Product
1 5 Null 5 60 Can
2 0 Null 5 65 Hat
3 0 Null 5 70 Box
4 6 Null 6 60 Fish
I basically want to take the word "Hat" in row 2 and place it into the "Profile" column of row 1, replacing the null value there. I am doing this for multiple rows.
In the case of the multiple rows I want to take the "Profile" column and make it equal to the "Product" column. I only want this to happen in the rows where the "ID" value matches the "Import ID", and where the "Field ID" is 65 specifically. In the example above the "ID" 5 matches the "Import ID" 5, so I want to take the "Product" value "Hat" where the "Field ID" is 65, and place that value into the "Profile" column where the ID is 5. My table has over 9000 rows and 600 would have to be changed in this way, with various ID's needing various products inserted.
The result I would like would be:
Row ID Profile Import ID Field ID Product
1 5 Hat 5 60 Can
2 0 Null 5 65 Hat
3 0 Null 5 70 Box
4 6 Null 6 60 Fish
I pray that makes sense...
My query was this
UPDATE 'Data'
SET 'Profile'='Product'
WHERE 'ID'='Import ID' AND 'Field ID'=65;
I have also tried a subquery
UPDATE 'Data'
SET 'Profile'= (SELECT 'Product' FROM Data WHERE 'Field ID'=65)
WHERE 'ID'='Import ID';
This did not work and I am just wondering if there is some logic I missing. Thank you to anyone who can help, I have been up for a bit trying to understand this...
You need to join the data; something like:
UPDATE d1
SET d1.Profile = d2.Product
FROM [Data] d1 -- dest
INNER JOIN [DATA] d2 -- source
ON d2.[Import ID] = d1.[ID] AND d2.[Field ID] = 65
(note swapped 2 columns...)
A couple thing to keep in mind when learning sql:
it isnt a good idea to have spaces in column names. although they might be easier to read, it makes your queries more difficult. most databases dont allow them at all, and those that do have different ways to specify the columns in queries.
to work around your problem, perhaps you should try to enclose the column name in backticks (`), or in square brackets ([ ]).
in any case, instead of a space, please consider an underscore.
with that in mind you should also remember that not to put column names in quotes. something like
SELECT 'Product' FROM Data WHERE 'Field ID'=65
would not work for two reasons:
a. Selecting quoted text will return that quoted text. so were the where clause to return two rows, you would get the text 'Product' returned twice.
b. here your where clause is comparing the text 'Field ID' with the number 65, which would always be false.
hope that helps