I know this is not the first time the topic is treated in StackOverflow, however, I have some questions I couldn't find an answer to or other questions have opposed answers.
I am doing a rather simple REST API (Silex-PHP) to be consumed initially by just one SPA (backbone app). I don't want to comment all the several authentication methods in this question as that topic is already fully covered on SO. I'll basically create a token for each user, and this token will be attached in every request that requires authentication by the SPA. All the SPA-Server transactions will run under HTTPS. For now, my decision is that the token doesn't expire. Tokens that expire/tokens per session are not complying with the statelessness of REST, right? I understand there's a lot of room for security improvement but that's my scope for now.
I have a model for Tokens, and thus a table in the database for tokens with a FK to user_id. By this I mean the token is not part of my user model.
REGISTER
I have a POST /users (requires no authentication) that creates a user in the database and returns the new user. This complies with the one request one resource rule. However, this brings me certain doubts:
My idea is that at the time to create a new user, create a new token for the user, to immediately return it with the Response, and thus, improving the UX. The user will immediately be able to start using the web app. However, returning the token for such response would break the rule of returning just the resource. Should I instead make two requests together? One to create the user and one to retrieve the token without the user needing to reenter credentials?
If I decided to return the token together with the user, then I believe POST /users would be confusing for the API consumer, and then something like POST /auth/register appears. Once more, I dislike this idea because involves a verb. I really like the simplicity offered in this answer. But then again, I'd need to do two requests together, a POST /users and a POST /tokens. How wrong is it to do two requests together and also, how would I exactly send the relevant information for the token to be attached to a certain user if both requests are sent together?
For now my flow works like follows:
1. Register form makes a POST /users request
2. Server creates a new user and a new token, returns both in the response (break REST rule)
3. Client now attaches token to every Request that needs Authorization
The token never expires, preserving REST statelessness.
EMAIL VALIDATION
Most of the current webapps require email validation without breaking the UX for the users, i.e the users can immediately use the webapp after registering. On the other side, if I return the token with the register request as suggested above, users will immediately have access to every resource without validating emails.
Normally I'd go for the following workflow:
1. Register form sends POST /users request.
2. Server creates a new user with validated_email set to false and stores an email_validation_token. Additionally, the server sends an email generating an URL that contains the email_validation_token.
3. The user clicks on the URL that makes a request: For example POST /users/email_validation/{email_validation_token}
4. Server validates email, sets validated_email to true, generates a token and returns it in the response, redirecting the user to his home page at the same time.
This looks overcomplicated and totally ruins the UX. How'd you go about it?
LOGIN
This is quite simple, for now I am doing it this way so please correct me if wrong:
1. User fills a log in form which makes a request to POST /login sending Basic Auth credentials.
2. Server checks Basic Auth credentials and returns token for the given user.
3. Web app attached the given token to every future request.
login is a verb and thus breaks a REST rule, everyone seems to agree on doing it this way though.
LOGOUT
Why does everyone seem to need a /auth/logout endpoint? From my point of view clicking on "logout" in the web app should basically remove the token from the application and not send it in further requests. The server plays no role in this.
As it is possible that the token is kept in localStorage to prevent losing the token on a possible page refresh, logout would also imply removing the token from the localStorage. But still, this doesn't affect the server. I understand people who need to have a POST /logout are basically working with session tokens, which again break the statelessness of REST.
REMEMBER ME
I understand the remember me basically refers to saving the returned token to the localStorage or not in my case. Is this right?
If you'd recommend any further reading on this topic I'd very much appreciate it. Thanks!
REGISTER
Tokens that expire/tokens per session are not complying with the statelessness of REST, right?
No, there's nothing wrong with that. Many HTTP authentication schemes do have expiring tokens. OAuth2 is super popular for REST services, and many OAuth2 implementations force the client to refresh the access token from time to time.
My idea is that at the time to create a new user, create a new token for the user, to immediately return it with the Response, and thus, improving the UX. The user will immediately be able to start using the web app. However, returning the token for such response would break the rule of returning just the resource. Should I instead make two requests together? One to create the user and one to retrieve the token without the user needing to reenter credentials?
Typically, if you create a new resource following REST best practices, you don't return something in response to a POST like this. Doing this would make the call more RPC-like, so I would agree with you here... it's not perfectly RESTful. I'll offer two solutions to this:
Ignore this, break the best practices. Maybe it's for the best in this case, and making exceptions if they make a lot more sense is sometimes the best thing to do (after careful consideration).
If you want be more RESTful, I'll offer an alternative.
Lets assume you want to use OAuth2 (not a bad idea!). The OAuth2 API is not really RESTful for a number of reasons. I'm my mind it is still better to use a well-defined authentication API, over rolling your own for the sake of being RESTful.
That still leaves you with the problem of creating a user on your API, and in response to this (POST) call, returning a secret which can be used as an access/refresh token.
My alternative is as follows:
You don't need to have a user in order to start a session.
What you can do instead is start the session before you create the user. This guarantees that for any future call, you know you are talking to the same client.
If you start your OAuth2 process and receive your access/refresh token, you can simply do an authenticated POST request on /users. What this means is that your system needs to be aware of 2 types of authenticated users:
Users that logged in with a username/password (`grant_type = passsword1).
Users that logged in 'anonymously' and intend to create a user after the fact. (grant_type = client_credentials).
Once the user is created, you can assign your previously anonymous session with the newly created user entity, thus you don't need to do any access/refresh token exchanges after creation.
EMAIL VALIDATION
Both your suggestions to either:
Prevent the user from using the application until email validation is completed.
Allow the user to use the application immediately
Are done by applications. Which one is more appropriate really depends on your application and what's best for you. Is there any risk associated with a user starting to use an account with an email they don't own? If no, then maybe it's fine to allow the user in right away.
Here's an example where you don't want to do this: Say if the email address is used by other members of your system to add a user as a friend, the email address is a type of identity. If you don't force users to validate their emails, it means I can act on behalf of someone with a different email address. This is similar to being able to receive invitations, etc. Is this an attack vector? Then you might want to consider blocking the user from using the application until the email is validated.
You might also consider only blocking certain features in your application for which the email address might be sensitive. In the previous example, you could prevent people from seeing invitations from other users until the email is validated.
There's no right answer here, it just depends on how you intend to use the email address.
LOGIN
Please just use OAuth2. The flow you describe is already fairly close to how OAuth2 works. Take it one step further an actually use OAuth2. It's pretty great and once you get over the initial hurdle of understanding the protocol, you'll find that it's easier than you thought and fairly straightforward to just implement the bits you specifically need for your API.
Most of the PHP OAuth2 server implementations are not great. They do too much and are somewhat hard to integrate with. Rolling your own is not that hard and you're already fairly close to building something similar.
LOGOUT
The two reasons you might want a logout endpoint are:
If you use cookie/session based authentication and want to tell the server to forget the session. It sounds like this is not an issue for you.
If you want to tell the server to expire the access/refresh token earlier. Yes, you can just remove them from localstorage, and that might be good enough. Forcing to expire them server-side might give you that little extra confidence. What if someone was able to MITM your browser and now has access to your tokens? I might want to quickly logout and expire all existing tokens. It's an edge case, and I personally have never done this, but that could be a reason why you would want it.
REMEMBER ME
Yea, implementing "remember me" with local storage sounds like a good idea.
I originally took the /LOGON and /LOGOUT approach. I'm starting to explore /PRESENCE. It seems it would help me combine both knowing someone's status and authentication.
0 = Offline
1 = Available
2 = Busy
Going from Offline to anything else should include initial validation (aka require username/password). You could use PATCH or PUT for this (depending how you see it).
You are right, SESSION is not allowed in REST, hence there is no need to login or logout in REST service and /login, /logout are not nouns.
For authentication you could use
Basic authentication over SSL
Digest authentication
OAuth 2
HMAC, etc.
I prefer to use PUBLIC KEY and PRIVATE KEY [HMAC]
Private key will never be transmitted over web and I don't care about public key. The public key will be used to make the user specific actions [Who is holding the api key]
Private key will be know by client app and the server. The private key will be used to create signature. You generate a signature token using private key and add the key into the header. The server will also generate the signature and validate the request for handshake.
Authorization: Token 9944b09199c62bcf9418ad846dd0e4bbdfc6ee4b
Now how you will get private key? you have to do it manually like you put facebook, twitter or google api key on you app.
However, in some case you can also return [not recommended] the key only for once like Amazon S3 does. They provide "AWS secret access key" at the registration response.
I have this question in mind and I wanted to get other developer's opinion on this issue.
For creating a user (like in Facebook or creating an account in Gmail), some people suggested to have an public/private (means we don't tell developers how to use it) action in API for it. I, however, think it is a security risk as even if it is not documented, a hacker can simple see the calls and http requests when our front-end app is using that api action to create a new user (using a web debugger like fiddler) and can find the url to that action so simple ! like this POST ~/api/user/create
and then he/she can send thousands of requests to create user, users needs to be verified but still he/she is adding a lot of junk users in our database and puts a lot of pressure on our servers.
So the question is how do we handle this? Allow this only on our website or what?
Thanks
You can use CAPTCHA to verify that's a real user.
I was reading through the windows live developers doc here. In that I saw they are having an authentication method something like this.
GET https://oauth.live.com/authorize?client_id=CLIENT_ID&scope=SCOPES&
response_type=RESPONSE_TYPE&redirect_uri=REDIRECT_URL
I understood everything except for where do I give the username and password of the user?
I am planning to create an app(first one in my life) to learn the working.
I also have never used or coded something over REST.
When using OAuth, your application never receives the user's username or password. Rather, the user logs in to Windows Live on the Windows Live servers and authorizes your application for access to their information. After they have authorized your application, you receive an access token from Windows Live on behalf of the user. You then use that access token with the Live API to retrieve user information.
Coding something using REST protocols isn't anything too terribly complicated. It has been my experience that you're just specifying parameters to the API using GET or POST as your request method. Adding OAuth on to your requests is a matter of specifying additional parameters.
You're task is to learn two things here since you've never done REST or OAUTH before. Spend time looking at both.
Oauth is hard to get and hard to implement.
You should choose an off-the-shelf Oauth library they exists for most languages.
(Then you do not have to worry about the details. OTOH: You should know how it works to know how to set up and fix if something goes wrong.)
http://oauth.net/code/
Everything I have tried requires the end user to sign in to yahoo...this won't work because the end user doesn't know the password or the username. This should be automated otherwise flickr wont work
You probably won't get this to work the way you want. OAuth requires the end user to authenticate with the service (Flickr) and physically authorize your application. So at the very least, you're going to have to interact with their server as a user if you want to authorize your application for use.
As a side note, you may want to investigate whether or not you can POST the required variables to Yahoo via some sort of script. Use Firefox and the Live HTTP Headers extension to view the POST information. This may or may not work, as my previous experience with some Yahoo forms require cookies designed to foil robotic submissions.
Creating a API here and I want people to be able to make simple mobile apps that could get the username/password of my users and of they go to interact with my server. So I need to have a Basic Auth(OAuth and other stuff are also going to be supported, mostly for a different use case). Right now I have a example from a Book saying i could just receive the (unencrypted) password as part of the post and looking at successful APIs I see that twitters gets unencrypted passwords on the headers of their HTTP request.
Another options would be to get md5 or SHA1 hashes, but without a secret salt, this seems like an exercise in futility. I asked a couple of people and everyone had a different(strong and heuristic) point of view, so....
What is the best way to get passwords for basic auth in a API and why?
Uh, do not give out the passwords of your users to other apps. Or via your API. Or ever. They should be stored 1-way anyway (i.e. hashed).
But I'm not so sure if that is what you are saying. You talk about OAuth (which you can use to generate tokens that let API's access various components of your system, because the user says that it is possible).
For example, say you wish to allow API-users to query a certain users properties (say, their location), then you create a token for this access via OAuth, and the API-caller passes that. At least, this is my understanding of the model. Obviously, you should review OAuths webside, and find an appropriate implementation for your given language.