I need to add group within a group
e.g. COMPUTER\Users group to the "Backup Operators" group.
Wix provides a way to add a user to a group using the GroupRef Element but does not seem to provide an obvious way to add a group
Can this be done? If so how?
You'd need to write a CustomAction. It probably wouldn't take too much to extend the existing User and Group CustomAction in the WiX toolset to support this. In fact, there is a feature request open for this behavior in the WiX toolset today. Maybe you could contribute the fix?
Some resources:
http://msdn.microsoft.com/en-us/library/aa370283(VS.85).aspx (Local Group Functions)
http://support.microsoft.com/kb/119671 (link seems to be broken, leaving in for now)
I got some C++ code that wraps user and group creation, and as I recall adding groups to groups should be possible with relative ease. Unfortunately I no longer have access to that code-base, perhaps the Boost library has support, or a simple VBScript should suffice.
I don't like to make software recommendations, but I have found that the VbsEdit application features a large library of standard VBScript samples - perhaps you can find a ready made script in its' sample library.
Related
I have a lot of documents of same type and i want to organize them in folders and subfolders. Is that possible in sanity?
Sanity doesn't have a concept of generic folders/subfolders in the traditional sense. But there's a new(ish) feature called Structure that makes it possible to declare nested navigation hierarchies in the content studio. Sounds like it could be a good match for your use case: https://www.sanity.io/docs/content-studio/structure-builder.
In particular the section about segmented content would be relevant I think: https://www.sanity.io/docs/structure-builder/how-it-works#segmented-content
Structure was introduced in version 0.134.0, so you may have to upgrade your content studio with sanity upgrade to start using it.
Is it possible to control the order of install/unintall of Wix Features? I am not sure if they are installed/uninstalled in the order they are defined in Product.wxs file. Could not find any documentation either.
Mostly I am concerned about uninstall order, I need to control the order in which features are uninstalled.
You can't control the order in which features are installed or uninstalled because that's not the way Windows Installer works. If you were to look at the MSI file with Orca and look at the order (by number) in the InstallExecuteSequence table you'd see actions like RemoveRegistryValues, RemoveFiles, RemoveFolders. These actions remove (for example) all the files in the product, not just the files (or registry entries) for a particular feature.
The short answer is that you can't control the order in which features are removed. It appears that you have asked a classic XY question and it might help to ask about the underlying problem you are trying to solve that leads you to believe that controlling feature uninstall order might help solve.
Visual Studio Installer states that it is a best practice to install each file as an installer component. The heat utility provided with Wix also seems to follow the practice of putting every file in its own component.
InstallShield's component wizard uses InstallShield's setup best practice of placing portable executable files in their own component but groups all other files (e.g. unversioned files) by the common destination folder.
The advantage of practice one (each file in its own component) is that each file is set up as a key file which is important if you want these files to trigger repairs. It also allows automation of creating the components (e.g. heat) easier since you are creating a component for each file.
The disadvantages of practice one include the overhead of managing so many components and the bloating of the registry after the application is installed.
An advantage of practice 2 could be seen in an install that installs hundreds of graphics files to one directory. If you do not care about repair functionality, is there any reason to create hundreds of components for this install?
These 2 different practices are conflicting and I want to know which one that people actually use and why.
I always use the Microsoft approach (something similar to what InstallShield does):
http://msdn.microsoft.com/en-us/library/aa368269(VS.85).aspx
I think it's the best because:
- important files (EXE, DLL etc.) have their own component, so they can be repaired easily
- resource files are grouped together
- it allows an optimum components count (not too many to get a long install, but enough to allow an easy repair)
I also noticed that most commercial setup authoring tools use this approach.
I've written about this in the past and I'll try to find a link to it. I think you already understand the question and it's just time for you to decide what is important to you.
For me, I work on installs with 15,000+ files and we only service with major upgrades. For "Program Executables" we follow 1:1 principals ( a must for COM, Services, ShortCuts and so on anyways ) but for content/data files we actually do a 1 to many with no key file approach to cut down on our number of components. Sure, that means we won't be able to create an MSP that services just one or two content files here and there but for our business needs that's simply not important to us.
Resilency was a bit of a 4 letter word to us so having less key files makes us happier anyways. :-) BTW, VDPROJ also makes every registry key a keyfile of it's own component and that was quite painful for us triggering unneeded repairs.
All of this aside, for anyone who doesn't fully understand all of this, I'd stick to the 1:1 pattern until you come across a situation where you don't want to anymore and you understand the impact of making that choice.
Supposing I have a merge module that installs a file "MyFile.txt" to a certain location, and that I wish to use that merge module, however I want to supply a different copy of "MyFile.txt" from the one supplied with the merge module.
Is it possible to do this? (And for bonus points how can I do this using Wix)
Update: Roughly speaking MyFile.txt is part of a package up component of installable items that we provide to others, they then comine these components with their own to produce an installer.
In the ideal world they would only need to add new files to the output, however this is a replacement for an existing system where they currently have the ability to modify or even replace items (suce as MyFile.txt) in the end installer, and so without the ability to do the same with the merge module the migration path will be difficult.
The packaged up component doesn't need to be a merge module if there is a better solution, however merge modules seemed like the sensible choice and in all other respects provide a very nice re-usable package of installer logic.
It's possible but every technique that I know is a bit of a hack and doesn't scale very well. Can you tell me more about what type of file MyFile.txt is and what the intent of the different flavors of the file? Usually my goal is to never have the same filename twice ( darn component rules ) and then design variation points to support the needs. Sometimes upstream changes to the application are required to do this correctly.
I know there are many questions out there regarding this same information. I have read them all, but my brain is all turned around and I don't know which way to go. Plus the lack of documentation really hurts.
Here is my scenerio. We are trying to use WIX to create an installer for our application that goes out to our dealers for our product information. The app includes about 2000 images and documents of our products and a SQL CE database that are updated via Microsoft Sync Framework. The data changes so often that keeping these 2000 as content files in the app's project is very undesirable. The app relies on .NET Framework 3.5 SP1, SQL Server CE 3.5, Microsoft Sync Framework 1.0 and ADO.NET Sync Services 2.0.
Here are the requirements for the app:
The dealers will be given the app on a CD every year for any updates (app or data updates).
The app must update itself from the internet to get any new images, documents or data.
The prerequisites must be installed if they do not exist on the client machine.
The complete installer should be generated from an MSBuild script with as little human interaction as possible (we don't want to be manually updating the 2000+ file list).
What we have accomplished so far is that we have a Votive project in our solution. We have manually specified the binaries in a .wxs file. Web have modified the .wixproj file to use the HeatDirectory task to gather our data (images and documents and database) from a specified location (This is broken and giving an ICE38 error). This seems all right, but still is a lot of work. We have to manually update our data by running the program in release mode and copying it to the specified directory.
I am looking to see what other people would do in this situation.
How would you arrange your solution with regards to the 2000+ data files? Would you create a custom build script that gets the current data from the server or would you include them as content files in the main project?
How would you get WIX to include all of the project output (including the referenced assemblies) and all of the data files? If you have any complete samples, that would be great. All I have found are little clips here and there and not an entire example from start to finish.
How would you deal with the version numbers? Would you put them as a constant in the build script and reference them through the $(var.VersionNumberName)? Would you have the version number automatically picked up from the project being deployed? If so, How?
If there is any better information than what I am finding, please include. I have read numerous articles, blogs, Stackoverflow questions, the tuturial, the wiki, etc. Everything seems to be in bits and pieces. The tutorial is nice, but doesn't explain anything about MSBuild and Votive. I would like to see a start to finish tutorial on using MSBuild and Votive and all the WIX MSBuild targets. If no one knows of a tutorial like this I may put one together. I have already spent the entire week gathering info and reading. I'm new to MSBuild as well, so if anyone has any great articles on MSBuild, please include them.
The key is to isolate the different types of complexities into separate merge modules and put them altogether into an MSI as part of the build. That way things that change often can change without impacting things that hardly change at all.
1) For the data files:
We use Paraffin to generate the WiX and hence the merge modules for an html + Flash based help system consisting of thousands of files (I can't convince the customer to go to CHM).
Compile these into a merge module all by themselves.
2) Assemblies: assuming that this is a set that changes less often just make a merge module by hand or with WixEdit with the correct files and dependencies.
3) For the version number there a lot of ways to manage this depending on your build system. The AssemblyInfoTask is pretty straight forward way to make sure all your assemblies are versioned appropriately. The MSBuild Extension Pack has some versioning stuff if you are using TFS.
I had a similar scenario and was unable to find a drop in solution so ended up with the following:
I wrote a custom command line program called wixgen.exe for generating wxs manifest files. It is pretty specific to our implementation in that it only knows how to create 2 types of wxs files. One for IIS Website/Virtual Directory deployments and another for Windows Service deployments.
Each time a build is triggered by our continuous integration server a post-build task runs wixgen with the right args to generate a new manifest.wxs for the project being changed. It automatically includes all the files needed for the deployment. These builds also version the dlls using a variation of the technique at: http://richardsbraindump.blogspot.com/2007/07/versioning-builds-with-tfs-and-msbuild.html
A seperate build which is manually triggered is then used to build the wixproj projects containing the generated wxs files and produce the msi's.
I would ditch the CD delivery (so 90's) and got with ClickOnce. This solution seems to fit well since you already use the .NET framework. With ClickOnce you should be able to just keep updating the content of your solution and make updates available to your heart's content. Let me know if you need, sample ClickOnce deployment code.
You can find more ClickOnce information here.
Similar to dkackman's answer, you should seperate your build into several components, isolating build components to be built seperately.
I come from a mainly Java background, however for building MSIs and NET executables we use maven; with the 'maven-wix-plugin' plugin for building the installers, and using the NMaven plugin for compiling any NET code. However, as we're only performing very basic development in NET, with most development in Java, we don't need too much complexity from the NMaven plugin (which is probably a 'good thing' (TM) as it's only at version 0.17).
If you're a purely NET house, you could also look into Blydan (http://www.codeplex.com/byldan), which seems to be the focus of development there at the moment (it's the same team for NMaven and Byldan).
If you do want more information on NMaven or Byldan raise another question and I'll give as much info as I can (which is not a huge amount, as stated I only do very limited NET development).