I am using application builder and setting up select boxes to populate a query that spits out into a report below, I'm having a problem with one populating though, and I can't immediatly see why;
Here's how I'm referencing;
AND CINEMA.LOCATION = :pticketstown
this works fine and pulls in the choice from the select box which is popluated from a query on the cinema table, however when I try and do the same thing for another table, try and pull in a film title from a select box choice - it doesnt seem to work, the rport says no output.
Im setting up the select box the same way, and its pulling in the films, but when as soon as I reference it in the sql report, the ouptut is empty.
FILM.FILM_TITLE = :pfilm
Has nayone any thoughts on why it would fail on something that uses the same method ? is it a case that the value isn't bieng passed across? I'm a little stumped if that's the case as I set it up the same way as the working one.
Thanks for looking
I assume from the sound of it you are using application express? Have you turned on debugging to see exactly what is being passed? It might be encoding the spaces or something.
It seems strange that the two, seemingly similar queries would behave differently. Do you have access to the actual sql produced? If so, i would try running that against your db direct through the command line or sql developer if you have it.
Related
Version 1 of the problem:
I create a simple (or complex) SQL query that works and save it, and then come back to it another day and try to run it. I get a message that it cannot find a field that is clearly in the table. If I copy the exact same query into a blank SQL window it works fine.
Version 2 of the problem:
Another version of this type of problem is when I write a query, run it a bunch of times, and then modify it in the same window, it sometimes (=quite often but not always) can't find a field that is clearly in the table. Again, copying the same query into a new window works just fine.
An example:
SELECT *
FROM table1
WHERE code1='xxx' and code2= 'yyy'
ORDER BY sortfield
I get the window saying 'Enter Parameter value for field Query1.sortfield' .
sortfield is in the table and copying this query to a new window works fine.
And to be clear, the query worked fine when first written.
Seems like Access is not properly clearing the buffer somehow.
I have Access 2010 and this happens very frequently, like maybe but not quite always, and seems to be getting worse. I have always had version 2 of the problem to some extent but version 1 is relatively new.
Does anyone have an idea of how to fix this?
Help is much appreciated!
I am using SSRS Report Builder 3.0 and I have put together a report, part of which uses a query that pulls in data and separates it into different summary rows using the NTILE() function in SQL. That's all working fine and dandy, but boss now wants me to add a parameter to decide whether the report should pull quartiles, quintiles, deciles, etc. and so I figured I would just create a parameter to pass an integer to the NTILE(#ntiles) function, and that would be a piece of cake.
Problem is, I've created my parameter, it is an INT and passes a value like (2,3,4,5,6,10) and linked it to my query in Report Builder, but when I save the query with NTILE(#ntiles) (I named my parameter #ntiles) it throws an error:
The function 'ntile' takes only a positive int or bigint expression as its input.
The funny thing is, the report will still run, and correctly as if the parameter works, but I have no idea why it's throwing this error and pretending like it's not going to work. Google didn't really turn anything up on this issue; is it a bug with Report Builder 3.0 or am I doing something wrong? How can I make the error go away? Thanks.
EDIT: Trying NTILE(CAST(#ntiles as INT)) threw the same error, and then broke the query so that the report would not run. Weirdly enough, just changing it back to NTILE(#ntiles) left it still broken; workaround was to change it to a real INT like NTILE(4), reload the query, then go back and change it to NTILE(#ntiles). It still throws the error when you save it, but it does not prevent the report from running with that workaround.
I frequently do a static analysis of SQL databases, during which I have the luxury of nobody being able to change the data except me.
However, I have not found a way to 'tell' this to SQL in order to prevent running the same query multiple times.
Here is what I would like to do, first I start with a complicated query that has a very small output.
SELECT * FROM MYTABLE WHERE MYPROPERTY = 1234
Then I run a simple query from the same window (Mostly using SQL server studio if that is relevant)
SELECT 1
Now I suddenly realize that I forgot to save the results from my first complicated (slow) query.
As I know the underlying data did not change (or even if it did) I would like to look one step back and simply get the result. However at the moment I don't know any trick to do this and I have to run the entire query again.
So the question summary is: How can I (automatically store/)get the results from recently executed queries.
I am particulary interested in simple select queries, and would be happy to allocate say 100MB memory for automated result storage. Would prefer a solution that works in SQL server studio with T-SQL, but other SQL solutions are also welcome.
EDIT: I am not looking for a way to manually prevent this from happening. In the cases where I can anticipate the problem it will not happen.
This can't be done in Microsoft SQL Server. SQL Server does not cache results, instead it caches data pages that were accessed by your query. This should make your query go a lot faster the second time around so it won't be as painful to re-run it.
In other databases, such as Oracle and MySQL, they do have a query caching mechanism that will allow you to retrieve the results directly the second time around.
I run into this frequently, I often just throw the results of longer-running queries into a temp table:
SELECT *
INTO #results1
FROM MYTABLE WHERE MYPROPERTY = 1234
SELECT *
FROM #results1
If the query is very long-running I might use a 'real' table. It's a good way to save on re-run time.
Downside is that it adds to your query.
You can also send query results to a file in SSMS, info on formatting the output is here: SSMS Results to File
The easiest way to do this is to run each query in its own SSMS window, the results will stay there until you close it, or run out of memory - besides that, I am not sure there is a way to accomplish what you want.
Once you close the SSMS window, I don't believe there is a way to get back 'cached' results.
This isn't a technical answer to your question. Having written queries and looking at results for many years, I am in the habit of saving the results in Excel, regardless of the database/query tool I'm using.
The format in Excel is rather methodical:
Each worksheet has the date. (Called something like "1 Jul".)
Each spreadsheet contains one month. (Typically with the month name like "work-201307".)
In the "B" column I copy and paste the query.
Underneath, in the "C" column, I copy and paste the results.
The next query starts a few lines after, one after the other.
I put the queries in the "B" column, so I can go to the "A" column and use to get to the first row. I put the results in the "C" column, so I can go to the "B" column and use to move between queries.
I mostly do this so I can go back and see the work I did many months ago. For instance, someone sends an email from February and says "do this again". I can go back to the February spreadsheet, go to the day it was created, and see what I was doing at that time.
In your question, though, I realize that I now instinctively solve this problem, because the "right click on the grid, copy with column headers, alt-tab to excel, alt-V" is a behavior that I comes quite naturally.
I was going to suggest you to run each query into a script with a counter (stored in a table) increased each time the query is executed (i.e. i++) and storing each query in a Temp Table called "tmpTable" + i, but it sounds very complicated to manage. Am I right?
Then I googled and I've found this Tool Pack: I didn't try it but you could take a look:
http://www.ssmstoolspack.com/Features
Hope it helps.
EDIT: added the folliwing link. There's the option to output as XML file and they mention SQL Server Integration Services as a possible solution too.
http://michaeljswart.com/2012/03/sending-query-results-to-others/#method5
SECOND EDIT: There's this DBMS-Independent tool too, it sounds interesting:
http://www.sql-workbench.net/
i am not sure this is what you want. Anyway check my answer
In sql server management studio you can open multiple tabs for executing queries. Open new tab for each query, then the result of executed queries will be available under that tab.
After executing one query in a tab dont use that tab for new query, open new tab for that job.
Have you considered using some kind of offline SQL client such as Excel? Specifically, Excel will retrieve the results into the spread sheet (using the Data ribbon/menus) where they are stored pretty much permanently as results. It will prompt you to refresh when necessary or you can do it on demand.
Your question as to whether it can be done in T/SQL or other databases depends on the database and results cache and even then they are options that the query processor can use not guarantees to the individual query.
I am changing the command text for a data set inside the .rdl ffile:
I would like to know how can I update the resulting fields that are returned by the select statement:
I know that these fields must be automatically generated, so I was wondering if it's possible to update them right after editing the SQL code inline??
Usually when someone wants to have a look at the data in command text they are wanting it for reference to an end user(from what I have seen). You may want to amend it but ultimately with reporting your first goal should be: "What am I doing this for?" If your goal is dynamic creation at runtime then I would avoid this and offer a few other suggestions:
Procertize it. Making a stored procedure if you have the know how in SQL Server is a convenient and fast way to get what you want and you can optimize it if you know what you are doing with your SQL FU to get good results. The downside would be if you work with multiple environments you have to deploy your code for the TSQL as well as the RDL file.
Use an expression to build the dataset at runtime. In cases where I have been told that the query itself was not properly optimized by other developers they have mentioned doing this. I myself do not always see the advantage of doing this versus just having your predicate construction work well with good indexing on the source engine. Regardless you can build your dataset at runtime. It would be similar to hitting 'fx' next to the text and then putting in something like this(assuming you have a variable named #Start):
="Select thing
from table
Where >= " & Parameters!Start.Value
Again I have not really seen if this is really that much faster than:
Select thing
from table
Where >= #Start
But it is there if you just want to build it dynamically.
You can try to build your expression dynamically from parameters being PART of the select statement. SSRS is all about the 'expressions' and what you can do with them. Once you jump in and learn how they apply to everything you can go nuts so to speak on using them. A general rule though is the more of them you use and rely on the slower your reports will become.
I hope some of this may help, I would ask first is something dynamic due to a need to be event driven or is performance related.
I have a relatively simple select statement in a VB6 program that I have to maintain. (Suppress your natural tendency to shudder; I inherited the thing, I didn't write it.)
The statement is straightforward (reformatted for clarity):
select distinct
b.ip_address
from
code_table a,
location b
where
a.code_item = b.which_id and
a.location_type_code = '15' and
a.code_status = 'R'
The table in question returns a list of IP addresses from the database. The key column in question is code_status. Some time ago, we realized that one of the IP addresses was no longer valid, so we changed its status to I (invalid) to exclude it from appearing in the query's results.
When you execute the query above in SQL Plus, or in SQL Developer, everything is fine. But when you execute it from VB6, the check against code_status is ignored, and the invalid IP address appears in the result set.
My first guess was that the results were cached somewhere. But, not being an Oracle expert, I have no idea where to look.
This is ancient VB6 code. The SQL is embedded in the application. At the moment, I don't have time to rewrite it as a stored procedure. (I will some day, given the chance.) But, I need to know what would cause this disparity in behavior and how to eliminate it. If it's happening here, it's likely happening somewhere else.
If anyone can suggest a good place to look, I'd be very appreciative.
Some random ideas:
Are you sure you committed the changes that invalidate the ip-address? Can someone else (using another db connection / user) see the changed code_status?
Are you sure that the results are not modified after they are returned from the database?
Are you sure that you are using the "same" database connection in SQLPlus as in the code (database, user etc.)?
Are you sure that that is indeed the SQL sent to the database? (You may check by tracing on the Oracle server or by debugging the VB code). Reformatting may have changed "something".
Off the top of my head I can't think of any "caching" that might "re-insert" the unwanted ip. Hope something from the above gives you some ideas on where to look at.
In addition to the suggestions that IronGoofy has made, have you tried swapping round the last two clauses?
where
a.code_item = b.wich_id and
a.code_status = 'R' and
a.location_type_code = '15'
If you get a different set of results then this might point to some sort of wrangling going on that results in dodgy SQL actually be sent to the database.
There are Oracle bugs that result in incorrect answers. This surely isn't one of those times. Usually they involve some bizarre combination of views and functions and dblinks and lunar phases...
It's not cached anywhere. Oracle doesn't cache results until 11 and even then it knows to change the cache when the answer may change.
I would guess this is a data issue. You have a DISTINCT on the IP address in the query, why? If there's no unique constraint, there may be more than one copy of your IP address and you only fixed one of them.
And your Code_status is in a completely different table from your IP addresses. You set the status to "I" in the code table and you get the list of IPs from the Location table.
Stop thinking zebras and start thinking horses. This is almost certainly just data you do not fully understand.
Run this
select
a.location_type_code,
a.code_status
from
code_table a,
location b
where
a.code_item = b.which_id and
b.ip_address = <the one you think you fixed>
I bet you get one row with an 'I' and another row with an 'R'
I'd suggest you have a look at the V$SQL system view to confirm that the query you believe the VB6 code is running is actually the query it is running.
Something along the lines of
select sql_text, fetches
where sql_text like '%ip_address%'
Verify that the SQL_TEXT is the one you expect and that the FETCHES count goes up as you execute the code.