I have a two-page SSRS report. When I exported it to PDF it was taking 4 pages due to its width, where the 2nd and 4th pages were displaying one of my fields from the table. I tried to set the layout size in report properties as width=18in and height =8.5in.
It gave me the whole table in a single page of PDF, but I am still getting the 2nd and 4th pages blank.
Is the way I am doing it incorrect? How else can I get rid of those blank pages?
In BIDS or SSDT-BI, do the following:
Click on Report > Report Properties > Layout tab (Page Setup tab in SSDT-BI)
Make a note of the values for Page width, Left margin, Right margin
Close and go back to the design surface
In the Properties window, select Body
Click the + symbol to expand the Size node
Make a note of the value for Width
To render in PDF correctly Body Width + Left margin + Right margin must be less than or equal to Page width. When you see blank pages being rendered it is almost always because the body width plus margins is greater than the page width.
Remember: (Body Width + Left margin + Right margin) <= (Page width)
Another thing to try is to set the report property called ConsumeContainerWhitespace to True (the default is false). That's how it got resolved for me.
After hours of struggling with this problem, I stumbled upon a solution that worked for me:
In SSDT (2012), I had originally had my Page Setup/Page units set to Centimeters. When I changed this to Inches, strangely enough, I was able to export my report to PDF without having every other page be blank.
It is better to do this on the design surface (Visual Studio 2012 is shown but can be done in other versions) first before calculating any maths when editing an SSRS document.
Below the following numbers in red circles that map to these following steps:
In the design surface, sometimes the editor will create a page which is larger than the actual controls; hence the ghost area being printed.
Resize to the controls. Visually look at the width/height and see if you can't bring in the page on the design surface to size it to the space actually needed by the controls and no more.
Then try to create a PDF and see if that fixes it.
If #3 does not resolve the issue, then there are controls requiring too much of the actual page size and going over in either length/width. So one will need to make the size of the controls smaller to accommodate a smaller page size.
Also in some circumstances one can just change a property of the report page by setting ConsumeContainerWhitespace to true to automatically consume the spaces.
The problem for me was that SSRS purposely treats your white space as if you intend it be honored:
As well as white space, make sure there is no right margin.
If the pages are blank coming from SSRS, you need to tweak your report layout. This will be far more efficient than running the output through and post process to repair the side effects of a layout problem.
SSRS is very finicky when it comes to pushing the boundaries of the margins. It is easy to accidentally widen/lengthen the report just by adjusting text box or other control on the report. Check the width and height property of the report surface carefully and squeeze them as much as possible. Watch out for large headers and footers.
I have worked with SSRS for over 10 years and the answers above are the go to answers. BUT. If nothing works, and you are completely stuffed....remove items from the report until the problem goes away. Once you have identified which row or report item is causing the problem, put it inside a rectangle container. That's it. Has helped us many many times! Extra pages are mostly caused by report items flowing over the right margin. When all else fails, putting things inside a rectangle or an empty rectangle to the right of an item, can stop this from happening. Good luck out there!
In addition to the margins, the most common issue by far, I have also seen two additional possibilities:
Using + to concatenate text. You should use & instead.
Text overflowing the width of the specified textbox. So if your textbox only holds 30 characters and you try to cram 300 in there, you might end up with extra pages.
Have you tried to see if there is any white space on the right of your report? If so you can drag it back to the end of your report and then drag the report background back to the same spot.
On the properties tab of the report (myReport.rdlc), change the "Keep Together" attribute to False. I've been struggling with this issue for a while and this seems to have solved my issue.
I recently inherited a report that I needed to make a few changes. After following all the recommendations above, it did not help. The report historically had this extra page, and nobody could figure out why.
I right clicked on the tablix and selected properties. There was a checkbox checked that said add a page break after. After removing this, it prints on one page now.
I fixed this issue by doing the following. ( Using the latest version of Report Builder )
Step 1.) Go to View Tab
Step 2.) Check the Properties checkbox
Step 3.) Click inside the body of your report (it will update values in properties tab)
Step 4.) Take not of the width here
Step 5.) Right click in the gray area outside the report and click report properties
Step 6.) Add your left + right margin to your body width ( if that equals 10 then make your width 11)
Step 7.) Save
If your report includes a subreport, the width of the subreport could push the boundaries of the body if subreport and hierarchy are allowed to grow.
I had a similar problem arise with a subreport that could be placed in a cell (spanning 2 columns). It looked like the span could contain it in the designer and it rendered fine in a winform or a browser and, originally, it could generate printer output (or pdf file) without spilling over onto excess pages.
Then, after changing some other column widths (and without exceeding the body width plus margins), the winform and browser renderings looked still looked fine but when the output (printer or pdf) was generated, it grew past the margins and wrote the right side of each page as a 2nd (4th, etc.) page. I could eliminate my problem by increasing colspan where the subreport was placed.
Whether or not you're using subreports, if you have page spillover and your body design fits within the margins of the page, look for something allowed to grow that pushes the width of the body out.
Make sure the designer in visual studio is not going beyond your max width. Hover over the right page border and drag to the left to make sure the page does not go over your desired layout.
I just reduced all elements Width shorter than 8 inch and it is being corrected,
I did that with mouse,
your report Body should be shorter than 8 inch.
I've successfully used pdftk to remove pages I didn't want/need in pdfs. You can download the program here
You might try something like the following. Taken from here under examples
Remove 'page 13' from in1.pdf to create out1.pdf
pdftk in.pdf cat 1-12 14-end output out1.pdf
or:
pdftk A=in1.pdf cat A1-12 A14-end output out1.pdf
Related
I've built a report in Reporting Services and when we browse to the report in Internet Explorer we want to be able to export the report in PDF format. It works, but it was cutting off the columns to the right and displaying them on the next page (in PDF) because the page was too wide. I changed the orientation to landscape and it still cut off the columns on the right. Then I changed the page size to legal paper and it fits on one page, but we want the report on letter size paper. Is there a way to compress the report to fit on letter size landscape?
Here is how to get a report to fit on a letter page:
Click on the blank space outside of your report
Look at the properties and find interactive size. Set it to 11,8.5in. Set your Margins to 0.5in, 0.5in, 0.5in, 0.5in
Click on the body and select properties. Set the width to 10in and something less than 7.5 for the height.
I was having this issue too. I set my margins to zero, which allowed me to print on 1 pdf page instead of 2.
When you develop report from SpagoBI Studio
change setting of Master Page (next to Layout).
No need to change orientation but you need to
increase the width of report according to your number of columns and column with.
make sure it is greater than sum of all column's width (table width)
This will solve the issues
I have been pulling my hair for a few days on this problem. I want to keep a table at the bottom of the first report page, NO MATTER how much other content there is (less than one page or more than one page). In other words, I want the table to behave just like a footer which is set to be printed only on the first page. However, as you may all know already, tables can't be put into a page footer in RDLC report (what a pity!).
I know I can put the rest content in a rectangle and consume the white space if there is any. However, this only works when my report is less than one-page. My table will be pushed to the next page if the content length in the rectangle exceeds the rectangle length.
Btw, I'm using VS 2012. Any help would be much appreciated!
First of all, I am extremely new to sql reporting services, so my guess as to what is causing this issue could very well be off.
Basically, the first page of my reports spit out just fine, but when the 2nd+ pages hit, the width of the table is greater than 8.5 (which is what the interactivewidth is set to) inches because it clips off the page, and then creates a whole other page that looks blank, but if you look closely you will see the edge of the table from the previous page on the left side like so:
I suspect is might have to do with a possible word wrapping issue on this particular tablecell:
Because on the 2nd+ pages, that same tablecell displays as:
Which seems to be where the extra width is coming from that is making the table to wide for the page width. Thanks for any help.
SSRS doesn't allow column width to change dynamically, so you don't have to worry about that. The settings you need to adjust are the Page Size and the Margins. If the default margin on each side is 1 inch, you are left with 6.5 inches width to really work with. Try reducing the margin first, that should fix it.
I have a RDLC report and I am displaying it on the Report Viewer Control in my front end application. I get the report perfectly and theres no problem in it.
But the problem arises when I try to export the report to a PDF (using available option - basically the inbuilt option).
I get the report in 3 pages whereas my client wants it to be in a single page. I am not able to figure out the reason for it as in my report viewer I see only one page but in a PDF there are 3 pages. I have only four columns with no data, still they are breaking up into multiple pages. 2 columns on 1st page 2 on second page. Not real sure what happened to the 3rd page. Somebody recommended changing the paper size of the default printer but I didn't think is was worth trying.
Can something be done abt it so that I can control the size of the report???
This can be a real PITA but there are several things you can do to get you there in BIDS.
To see what it will look like as a pdf use the "Print Layout" button on the preview mode toolbar.
Goto the report properties and set the orientation and paper size as you need them.
Remember the margins in the report properties to make your report display area smaller. I generally set these smaller than the defaults.
Go back to you report items and make sure they are smaller than (pagesize - margins)
This should help.
you can try setting InteractiveHeight=0 , I know that at least works for the MHTML output, not sure about PDF, but it might lead you in the right direction
I have a user sign off report where it shows a users rights/access to the system which all fits nicely onto one page when I hit preview. However when I then go to print layout it shows me two pages with the second page only containg the footer.
Any ideas please?
Are you sure the page size matches the paper size?
If so, have you tried setting the page footer's PrintOnLastPage property to false? Then again, if you really need that footer to be there (seeing that there's only one page), you might have to try fiddling with the margins to get it to fit within the first page.
The report size at design time, plus the margins must be less than the paper size. Sometimes you can have a report that is too wide that is essentially generating a blank page "to the right" rather than underneath the first page.
Yes I have scrunched it all up so that it is WELL within the page size and I have tried all combinations of Footers (and headers).
It is a slightly wierd report in that it has fields that need to grow to show all the information and a small table too, but even at full growth the data looks like it fits on one page (in preview in Visual Studio) but as soon as it goes to print preview and printing it reverts to two pages.
Make sure you do not have extra area to the right of the last field of the report.
Are you sure you've adjusted the report's display size in the property sheet, too?
Hope this helps,
Bill