Related
In book 'Head First Design Patterns', one of the way mentioned to not violate 'Dependency Inversion' principle is as:
No class derive from a concrete class.
Is it possible to follow this rule thoroughly? In many commonly used frameworks and libraries its common to find classes not following this rule.
Inheritance is an important part of c#, ruling it out would be a waste.
Nevertheless, the book emphasizes the open for extension closed for change SOLID principle and this is actually a good thing.
Not to derive from concrete classes ( note, abstract classes and interfaces are not concrete ), helps you to adapt this paradigm. Inheritance is not typically suited for extension, and makes inversion harder ( because the latter relies on interfaces and concretes are not interfaces ).
So in practice, you'll see that base classes are often abstract. Not all, and not every framework adopts it. Sometimes there are good reasons to inherit from a concrete. But the book, is in it's way a easy read and to go into details on the exceptions would make it much harder to read.
So bottom line: no, one should not follow the rule at all cost but only do concrete inheritance if one of the following:
you know what you are doing (so you have a really really really good reason)
you know it doesn't matter ( because it's a simple project/object)
you know the concretes will be contained to the project itself (internals)
As problems in programming are very different, it's hard to tell. Sometimes you it's usefull to do it, sometimes it's not.
It's also possible to redesign the situations that you think you can't to actually achieve this. But in the new design you may end up with more classes that you don't really need and are only used to achieve this.
The question in this case is: Is having more stuff just to achieve some principle without having problems in your code a good design?
In my experience it is better to try and avoid inheriting from concrete classes. Try to design you code so that you don't inherit from concrete classes. This will make your code better to read and understand as it guides you to designing your abstractions better. But sometimes it's usefull to do just that.
As you mentioned frameworks do that. Especially GUI frameworks. You see a lot inheritance from concrete classes there. That's because it's usefull to add additional behavior to already existing controls.
For example a Button is fine on it's own, but sometimes you may need to add an additional behavior for your needs. Inheriting from Button and just adding the new things you need is just fine. Can you do it another way? Sure, but is it worth adding addtional classes and/or interfaces or coping code from Button just to avoid inheriting from a concrete class? Is is so bad? Where can it hust?
You do achieve extensibility this way, as the framework will still work just fine.
GUI frameworks also use composition a-lot too, so what you get is a combination of composition with inheritance from both concrete and abstract classes. Just use the right one where you need it.
Not all problems are like that with a hierarchical structure with a a-lot of related objects. Sometimes inheritance can hurt extensibility and using composition is a better choise.
There is a Design Principle that says Favor composition over inheritance and its advertised benefit is that it simplifies design. Let's agree on that as background for this question.
So, could override be deprecated? Could we, in theory, get rid of it for good?
Let's be a bit over zealous on the above mentioned Design Principle and take it to the extreme: composition all the way. One reason should be enough for now, override abuse.
One question arises: are we, programmers, going to loose something? Is any power lost trying to prevent some possible abuse?
So, what applications are there for override and can they be achieved otherwise? Should they?
Not only is this a completely radical and impractical proposal, it's not a particularly compelling one. Just because a feature gets abused doesn't mean that it should be removed entirely. People have been abusing all sorts of things for a very long time, but that hardly implies that they don't serve a useful purpose when used correctly.
Design patterns are one thing; designing an intentionally limited language to conform with your ideal notion of a good design pattern is quite another. To my mind, it's an exercise in futility. Programmers will still find something to abuse.
And I take issue with the central assumption that any use of override is inappropriate or abusive. There are lots of cases where you want to take advantage of inheritance implying an is-a relationship. Sure, this model doesn't fit the real world 100% of the time, but there are plenty of times that it does.
The Animal and Shape class examples that you read about in textbooks might be a bit contrived, but I frequently use inheritance in real-world applications.
That's not to imply that I disagree with the sentiment that one should generally or when in doubt, favor composition over inheritance. But that's not saying that inheritance is bad and should never be used.
If you remove inheritance altogether you remove a significant feature of OOP design.
Using inheritance allows you to use a "is a" design, which has a strong meaning in OOP design, and of course saves code redundancy.
If you'd use only encapsulation you'd have to either expose the members (which isn't always what you want (raises design complexity because of the amount of stuff the programmer needs to know about).
Or, make wrapper methods that will call the member's methods (which is redundant).
Besides that, lets assume you know the difference between overriding and hiding, you can see that most OOP languages will choose to use strictly overriding when given the choice.
This is because overriding is usually more intuitive than hiding.
So, if you remove overriding, and still allow inheritance, you are left with hiding. That usually leads to many runtime errors and un-expected results with type conflicts.
Farther more you won't be able to have things like an array or list of base class pointers that point a lot of different derived classes. Because if you don't have overrides it won't be able to call the specified derived class method, it will only call the same base class method for all of them.
I've added a response on behalf of astander extracting from his link (hope you don't mind)
For example, one advantage with inheritance is that it is easier to
use than composition. However, that ease of use comes at the cost that
it is harder to reuse because the subclass is tied to the parent
class.
One advantage of composition is that it is more flexible because
behavior can be swapped at runtime. One disadvantage of composition is
that the behavior of the system may be harder to understand just by
looking at the source. These are all factors one should think about
when applying composition over inheritance.
I'm always using polymorphism. I always seem to have a bunch of objects with some common concept behind them and a lot of code that is interested in that concept--that is, they care about Animals, not Lions and Tigers and Bears or even Carnivores. Interfaces often work better for this than superclasses, so I suppose I could get by without subclassing. (Are interfaces okay when subclassing is not?) However, I have often found that a lot of classes using an interface have identical code for the interface methods. Changing the interface to a superclass can let me get rid of a lot of duplicate code. The other situation I find myself in is where a large, complex class does what I need except for one teeny, tiny little thing. With subclassing, I can create a new class that does exactly what I need in just a few lines.
There may be a language component to this debate. When I'm writing in Java I subclass at a furious rate. When I'm writing in C# I think long and hard before overriding anything or even using interfaces. I'm not sure why and it may have more to do with the type of work I do in those languages than the languages themselves. But working in C#, I am quite sympathetic to this idea, while when working in Java...well, I'd have to toss almost all my Java code if I couldn't override.
This article describes an approach to OOP I find interesting:
What if objects exist as
encapsulations, and the communicate
via messages? What if code re-use has
nothing to do with inheritance, but
uses composition, delegation, even
old-fashioned helper objects or any
technique the programmer deems fit?
The ontology does not go away, but it
is decoupled from the implementation.
The idea of reuse without inheritance or dependence to a class hierarchy is what I found most astounding, but how feasible is this?
Examples were given but I can't quite see how I can change my current code to adapt this approach.
So how feasible is this approach? Or is there really not a need for changing code but rather a scenario-based approach where "use only when needed or optimal"?
EDIT: oops, I forgot the link: here it is link
I'm sure you've heard of "always prefer composition over inheritance".
The basic idea of this premise is multiple objects with different functionalities are put together to create one fully-featured object. This should be preferred over inheriting functionality from disparate objects that have nothing to do with each other.
The main argument regarding this is contained in the definition of the Liskov Substitution Principle and playfully illustrated by this poster:
If you had a ToyDuck object, which object should you inherit from, from a purely inheritance standpoint? Should you inherit from Duck? No -- most likely you should inherit from Toy.
Bottomline is you should be using the correct method of abstraction -- whether inheritance or composition -- for your code.
For your current objects, consider if there are objects that ought to be removed from the inheritance tree and included merely as a property that you can call and invoke.
Inheritance is not well suited for code reuse. Inheriting for code reuse usually leads to:
Classes with inherited methods that must not be called on them (violating the Liskov substitution principle), which confuses programmers and leads to bugs.
Deep hierarchies where it takes inordinate amount of time to find the method you need when it can be declared anywhere in dozen or more classes.
Generally the inheritance tree should not get more than two or three levels deep and usually you should only inherit interfaces and abstract base classes.
There is however no point in rewriting existing code just for sake of it. However when you need to modify, try to switch to composition where possible. That will usually allow you to modify the code in smaller pieces, since there will be less coupling between the classes.
I just skimmed the text over, but it seems to say what OO design was always about: Inheritance is not meant as a code reuse tool and loose coupling is good. This has been written dozens times before, see the linked references on the article bottom. This does not mean you should skip inheritance entirely, you just have to use it conciously and only when it makes sense. The article also states this.
As for the duck typing, I find the examples and thoughts questionable. Like this one:
function good (foo) {
if ( !foo.baz || !foo.quux ) {
throw new TypeError("We need foo to have baz and quux methods.");
}
return foo.baz(foo.quux(10));
}
What’s the point in adding three new lines just to report an error that would be reported by the runtime automatically?
Inheritance is fundamental
no inheritance, no OOP.
prototyping and delegation can be used to effect inheritance (like in JavaScript), which is fine, and is functionally equivalent to inheritance
objects, messages, and composition but no inheritance is object-based, not object-oriented. VB5, not Java. Yes it can be done; plan on writing a lot of boilerplate code to expose interfaces and forward operations.
Those that insist inheritance is unnecessary, or that it is 'bad' are creating strawmen: it is easy to imagine scenarios where inheritance is used badly; this is not a reflection on the tool, but on the tool-user.
I must confess I'm somewhat of an OOP skeptic. Bad pedagogical and laboral experiences with object orientation didn't help. So I converted into a fervent believer in Visual Basic (the classic one!).
Then one day I found out C++ had changed and now had the STL and templates. I really liked that! Made the language useful. Then another day MS decided to apply facial surgery to VB, and I really hated the end result for the gratuitous changes (using "end while" instead of "wend" will make me into a better developer? Why not drop "next" for "end for", too? Why force the getter alongside the setter? Etc.) plus so much Java features which I found useless (inheritance, for instance, and the concept of a hierarchical framework).
And now, several years afterwards, I find myself asking this philosophical question: Is inheritance really needed?
The gang-of-four say we should favor object composition over inheritance. And after thinking of it, I cannot find something you can do with inheritance you cannot do with object aggregation plus interfaces. So I'm wondering, why do we even have it in the first place?
Any ideas? I'd love to see an example of where inheritance would be definitely needed, or where using inheritance instead of composition+interfaces can lead to a simpler and easier to modify design. In former jobs I've found if you need to change the base class, you need to modify also almost all the derived classes for they depended on the behaviour of parent. And if you make the base class' methods virtual... then not much code sharing takes place :(
Else, when I finally create my own programming language (a long unfulfilled desire I've found most developers share), I'd see no point in adding inheritance to it...
Really really short answer: No. Inheritance is not needed because only byte code is truly needed. But obviously, byte code or assemble is not a practically way to write your program. OOP is not the only paradigm for programming. But, I digress.
I went to college for computer science in the early 2000s when inheritance (is a), compositions (has a), and interfaces (does a) were taught on an equal footing. Because of this, I use very little inheritance because it is often suited better by composition. This was stressed because many of the professors had seen bad code (along with what you have described) because of abuse of inheritance.
Regardless of creating a language with or without inheritances, can you create a programming language which prevents bad habits and bad design decisions?
I think asking for situations where inheritance is really needed is missing the point a bit. You can fake inheritance by using an interface and some composition. This doesnt mean inheritance is useless. You can do anything you did in VB6 in assembly code with some extra typing, that doesn't mean VB6 was useless.
I usually just start using an interface. Sometimes I notice I actually want to inherit behaviour. That usually means I need a base class. It's that simple.
Inheritance defines an "Is-A" relationship.
class Point( object ):
# some set of features: attributes, methods, etc.
class PointWithMass( Point ):
# An additional feature: mass.
Above, I've used inheritance to formally declare that PointWithMass is a Point.
There are several ways to handle object P1 being a PointWithMass as well as Point. Here are two.
Have a reference from PointWithMass object p1 to some Point object p1-friend. The p1-friend has the Point attributes. When p1 needs to engage in Point-like behavior, it needs to delegate the work to its friend.
Rely on language inheritance to assure that all features of Point are also applicable to my PointWithMass object, p1. When p1 needs to engage in Point-like behavior, it already is a Point object and can just do what needs to be done.
I'd rather not manage the extra objects floating around to assure that all superclass features are part of a subclass object. I'd rather have inheritance to be sure that each subclass is an instance of it's own class, plus is an instance of all superclasses, too.
Edit.
For statically-typed languages, there's a bonus. When I rely on the language to handle this, a PointWithMass can be used anywhere a Point was expected.
For really obscure abuse of inheritance, read about C++'s strange "composition through private inheritance" quagmire. See Any sensible examples of creating inheritance without creating subtyping relations? for some further discussion on this. It conflates inheritance and composition; it doesn't seem to add clarity or precision to the resulting code; it only applies to C++.
The GoF (and many others) recommend that you only favor composition over inheritance. If you have a class with a very large API, and you only want to add a very small number of methods to it, leaving the base implementation alone, I would find it inappropriate to use composition. You'd have to re-implement all of the public methods of the encapsulated class to just return their value. This is a waste of time (programmer and CPU) when you can just inherit all of this behavior, and spend your time concentrating on new methods.
So, to answer your question, no you don't absolutely need inheritance. There are, however, many situations where it's the right design choice.
The problem with inheritance is that it conflates the issue of sub-typing (asserting an is-a relationship) and code reuse (e.g., private inheritance is for reuse only).
So, no it's an overloaded word that we don't need. I'd prefer sub-typing (using the 'implements' keyword) and import (kinda like Ruby does it in class definitions)
Inheritance lets me push off a whole bunch of bookkeeping onto the compiler because it gives me polymorphic behavior for object hierarchies that I would otherwise have to create and maintain myself. Regardless of how good a silver bullet OOP is, there will always be instances where you want to employ a certain type of behavior because it just makes sense to do. And ultimately, that's the point of OOP: it makes a certain class of problems much easier to solve.
The downsides of composition is that it may disguise the relatedness of elements and it may be harder for others to understand. With,say, a 2D Point class and the desire to extend it to higher dimensions, you would presumably have to add (at least) Z getter/setter, modify getDistance(), and maybe add a getVolume() method. So you have the Objects 101 elements: related state and behavior.
A developer with a compositional mindset would presumably have defined a getDistance(x, y) -> double method and would now define a getDistance(x, y, z) -> double method. Or, thinking generally, they might define a getDistance(lambdaGeneratingACoordinateForEveryAxis()) -> double method. Then they would probably write createTwoDimensionalPoint() and createThreeDimensionalPoint() factory methods (or perhaps createNDimensionalPoint(n) ) that would stitch together the various state and behavior.
A developer with an OO mindset would use inheritance. Same amount of complexity in the implementation of domain characteristics, less complexity in terms of initializing the object (constructor takes care of it vs. a Factory method), but not as flexible in terms of what can be initialized.
Now think about it from a comprehensibility / readability standpoint. To understand the composition, one has a large number of functions that are composed programmatically inside another function. So there's little in terms of static code 'structure' (files and keywords and so forth) that makes the relatedness of Z and distance() jump out. In the OO world, you have a great big flashing red light telling you the hierarchy. Additionally, you have an essentially universal vocabulary to discuss structure, widely known graphical notations, a natural hierarchy (at least for single inheritance), etc.
Now, on the other hand, a well-named and constructed Factory method will often make explicit more of the sometimes-obscure relationships between state and behavior, since a compositional mindset facilitates functional code (that is, code that passes state via parameters, not via this ).
In a professional environment with experienced developers, the flexibility of composition generally trumps its more abstract nature. However, one should never discount the importance of comprehensibility, especially in teams that have varying degrees of experience and/or high levels of turnover.
Inheritance is an implementation decision. Interfaces almost always represent a better design, and should usually be used in an external API.
Why write a lot of boilerplate code forwarding method calls to a composed member object when the compiler will do it for you with inheritance?
This answer to another question summarises my thinking pretty well.
Does anyone else remember all of the OO-purists going ballistic over the COM implementation of "containment" instead of "inheritance?" It achieved essentially the same thing, but with a different kind of implementation. This reminds me of your question.
I strictly try to avoid religious wars in software development. ("vi" OR "emacs" ... when everybody knows its "vi"!) I think they are a sign of small minds. Comp Sci Professors can afford to sit around and debate these things. I'm working in the real world and could care less. All of this stuff are simply attempts at giving useful solutions to real problems. If they work, people will use them. The fact that OO languages and tools have been commercially available on a wide scale for going on 20 years is a pretty good bet that they are useful to a lot of people.
There are a lot of features in a programming language that are not really needed. But they are there for a variety of reasons that all basically boil down to reusability and maintainability.
All a business cares about is producing (quality of course) cheaply and quickly.
As a developer you help do this is by becoming more efficient and productive. So you need to make sure the code you write is easily reusable and maintainable.
And, among other things, this is what inheritance gives you - the ability to reuse without reinventing the wheel, as well as the ability to easily maintain your base object without having to perform maintenance on all similar objects.
There's lots of useful usages of inheritance, and probably just as many which are less useful. One of the useful ones is the stream class.
You have a method that should be able stream data. By using the stream base class as input to the method you ensure that your method can be used to write to many kinds of streams without change. To the file system, over the network, with compression, etc.
No.
for me, OOP is mostly about encapsulation of state and behavior and polymorphism.
and that is. but if you want static type checking, you'll need some way to group different types, so the compiler can check while still allowing you to use new types in place of another, related type. creating a hierarchy of types lets you use the same concept (classes) for types and for groups of types, so it's the most widely used form.
but there are other ways, i think the most general would be duck typing, and closely related, prototype-based OOP (which isn't inheritance in fact, but it's usually called prototype-based inheritance).
Depends on your definition of "needed". No, there is nothing that is impossible to do without inheritance, although the alternative may require more verbose code, or a major rewrite of your application.
But there are definitely cases where inheritance is useful. As you say, composition plus interfaces together cover almost all cases, but what if I want to supply a default behavior? An interface can't do that. A base class can. Sometimes, what you want to do is really just override individual methods. Not reimplement the class from scratch (as with an interface), but just change one aspect of it. or you may not want all members of the class to be overridable. Perhaps you have only one or two member methods you want the user to override, and the rest, which calls these (and performs validation and other important tasks before and after the user-overridden methods) are specified once and for all in the base class, and can not be overridden.
Inheritance is often used as a crutch by people who are too obsessed with Java's narrow definition of (and obsession with) OOP though, and in most cases I agree, it's the wrong solution, as if the deeper your class hierarchy, the better your software.
Inheritance is a good thing when the subclass really is the same kind of object as the superclass. E.g. if you're implementing the Active Record pattern, you're attempting to map a class to a table in the database, and instances of the class to a row in the database. Consequently, it is highly likely that your Active Record classes will share a common interface and implementation of methods like: what is the primary key, whether the current instance is persisted, saving the current instance, validating the current instance, executing callbacks upon validation and/or saving, deleting the current instance, running a SQL query, returning the name of the table that the class maps to, etc.
It also seems from how you phrase your question that you're assuming that inheritance is single but not multiple. If we need multiple inheritance, then we have to use interfaces plus composition to pull off the job. To put a fine point about it, Java assumes that implementation inheritance is singular and interface inheritance can be multiple. One need not go this route. E.g. C++ and Ruby permit multiple inheritance for your implementation and your interface. That said, one should use multiple inheritance with caution (i.e. keep your abstract classes virtual and/or stateless).
That said, as you note, there are too many real-life class hierarchies where the subclasses inherit from the superclass out of convenience rather than bearing a true is-a relationship. So it's unsurprising that a change in the superclass will have side-effects on the subclasses.
Not needed, but usefull.
Each language has got its own methods to write less code. OOP sometimes gets convoluted, but I think that is the responsability of the developers, the OOP platform is usefull and sharp when it is well used.
I agree with everyone else about the necessary/useful distinction.
The reason I like OOP is because it lets me write code that's cleaner and more logically organized. One of the biggest benefits comes from the ability to "factor-up" logic that's common to a number of classes. I could give you concrete examples where OOP has seriously reduced the complexity of my code, but that would be boring for you.
Suffice it to say, I heart OOP.
Absolutely needed? no,
But think of lamps. You can create a new lamp from scratch each time you make one, or you can take properties from the original lamp and make all sorts of new styles of lamp that have the same properties as the original, each with their own style.
Or you can make a new lamp from scratch or tell people to look at it a certain way to see the light, or , or, or
Not required, but nice :)
Thanks to all for your answers. I maintain my position that, strictly speaking, inheritance isn't needed, though I believe I found a new appreciation for this feature.
Something else: In my job experience, I have found inheritance leads to simpler, clearer designs when it's brought in late in the project, after it's noticed a lot of the classes have much commonality and you create a base class. In projects where a grand-schema was created from the very beginning, with a lot of classes in an inheritance hierarchy, refactoring is usually painful and dificult.
Seeing some answers mentioning something similar makes me wonder if this might not be exactly how inheritance's supposed to be used: ex post facto. Reminds me of Stepanov's quote: "you don't start with axioms, you end up with axioms after you have a bunch of related proofs". He's a mathematician, so he ought to know something.
The biggest problem with interfaces is that they cannot be changed. Make an interface public, then change it (add a new method to it) and break million applications all around the world, because they have implemented your interface, but not the new method. The app may not even start, a VM may refuse to load it.
Use a base class (not abstract) other programmers can inherit from (and override methods as needed); then add a method to it. Every app using your class will still work, this method just won't be overridden by anyone, but since you provide a base implementation, this one will be used and it may work just fine for all subclasses of your class... it may also cause strange behavior because sometimes overriding it would have been necessary, okay, might be the case, but at least all those million apps in the world will still start up!
I rather have my Java application still running after updating the JDK from 1.6 to 1.7 with some minor bugs (that can be fixed over time) than not having it running it at all (forcing an immediate fix or it will be useless to people).
//I found this QA very useful. Many have answered this right. But i wanted to add...
1: Ability to define abstract interface - E.g., for plugin developers. Of course, you can use function pointers, but this is better and simpler.
2: Inheritance helps model types very close to their actual relationships. Sometimes a lot of errors get caught at compile time, because you have the right type hierarchy. For instance, shape <-- triangle (lets say there is a lot of code to be reused). You might want to compose triangle with a shape object, but shape is an incomplete type. Inserting dummy implementations like double getArea() {return -1;} will do, but you are opening up room for error. That return -1 can get executed some day!
3: void func(B* b); ... func(new D()); Implicit type conversion gives a great notational convenience since Derived is Base. I remember having read Straustrup saying that he wanted to make classes first class citizens just like fundamental data types (hence overloading operators etc). Implicit conversion from Derived to Base, behaves just like an implicit conversion from a data type to broader compatible one (short to int).
Inheritance and Composition have their own pros and cons.
Refer to this related SE question on pros of inheritance and cons of composition.
Prefer composition over inheritance?
Have a look at the example in this documentation link:
The example shows different use cases of overriding by using inheritance as a mean to achieve polymorphism.
In the following, inheritance is used to present a particular property for all of several specific incarnations of the same type thing. In this case, the GeneralPresenation has a properties that are relevant to all "presentation" (the data passed to an MVC view). The Master Page is the only thing using it and expects a GeneralPresentation, though the specific views expect more info, tailored to their needs.
public abstract class GeneralPresentation
{
public GeneralPresentation()
{
MenuPages = new List<Page>();
}
public IEnumerable<Page> MenuPages { get; set; }
public string Title { get; set; }
}
public class IndexPresentation : GeneralPresentation
{
public IndexPresentation() { IndexPage = new Page(); }
public Page IndexPage { get; set; }
}
public class InsertPresentation : GeneralPresentation
{
public InsertPresentation() {
InsertPage = new Page();
ValidationInfo = new PageValidationInfo();
}
public PageValidationInfo ValidationInfo { get; set; }
public Page InsertPage { get; set; }
}
I know about "class having a single reason to change". Now, what is that exactly? Are there some smells/signs that could tell that class does not have a single responsibility? Or could the real answer hide in YAGNI and only refactor to a single responsibility the first time your class changes?
The Single Responsibility Principle
There are many obvious cases, e.g. CoffeeAndSoupFactory. Coffee and soup in the same appliance can lead to quite distasteful results. In this example, the appliance might be broken into a HotWaterGenerator and some kind of Stirrer. Then a new CoffeeFactory and SoupFactory can be built from those components and any accidental mixing can be avoided.
Among the more subtle cases, the tension between data access objects (DAOs) and data transfer objects (DTOs) is very common. DAOs talk to the database, DTOs are serializable for transfer between processes and machines. Usually DAOs need a reference to your database framework, therefore they are unusable on your rich clients which neither have the database drivers installed nor have the necessary privileges to access the DB.
Code Smells
The methods in a class start to be grouped by areas of functionality ("these are the Coffee methods and these are the Soup methods").
Implementing many interfaces.
Write a brief, but accurate description of what the class does.
If the description contains the word "and" then it needs to be split.
Well, this principle is to be used with some salt... to avoid class explosion.
A single responsibility does not translate to single method classes. It means a single reason for existence... a service that the object provides for its clients.
A nice way to stay on the road... Use the object as person metaphor... If the object were a person, who would I ask to do this? Assign that responsibility to the corresponding class. However you wouldn't ask the same person to do your manage files, compute salaries, issue paychecks, and verify financial records... Why would you want a single object to do all these? (it's okay if a class takes on multiple responsibilities as long as they are all related and coherent.)
If you employ a CRC card, it's a nice subtle guideline. If you're having trouble getting all the responsibilities of that object on a CRC card, it's probably doing too much... a max of 7 would do as a good marker.
Another code smell from the refactoring book would be HUGE classes. Shotgun surgery would be another... making a change to one area in a class causes bugs in unrelated areas of the same class...
Finding that you are making changes to the same class for unrelated bug-fixes again and again is another indication that the class is doing too much.
A simple and practical method to check single responsibility (not only classes but also method of classes) is the name choice. When you design a class, if you easily find a name for the class that specify exactly what it defines, you're in the right way.
A difficulty to choose a name is near always a symptom of bad design.
the methods in your class should be cohesive...they should work together and make use of the same data structures internally. If you find you have too many methods that don't seem entirely well related, or seem to operate on different things, then quite likely you don't have a good single responsibility.
Often it's hard to initially find responsibilities, and sometimes you need to use the class in several different contexts and then refactor the class into two classes as you start to see the distinctions. Sometimes you find that it's because you are mixing an abstract and concrete concept together. They tend to be harder to see, and, again, use in different contexts will help clarify.
The obvious sign is when your class ends up looking like a Big Ball of Mud, which is really the opposite of SRP (single responsibility principle).
Basically, all the object's services should be focused on carrying out a single responsibility, meaning every time your class changes and adds a service which does not respect that, you know you're "deviating" from the "right" path ;)
The cause is usually due to some quick fixes hastily added to the class to repair some defects. So the reason why you are changing the class is usually the best criteria to detect if you are about to break the SRP.
Martin's Agile Principles, Patterns, and Practices in C# helped me a lot to grasp SRP. He defines SRP as:
A class should have only one reason to change.
So what is driving change?
Martin's answer is:
[...] each responsibility is an axis of change. (p. 116)
and further:
In the context of the SRP, we define a responsibility to be a reason for change. If you can think of more than one motive for changing a class, that class has more than one responsibility (p. 117)
In fact SRP is encapsulating change. If change happens, it should just have a local impact.
Where is YAGNI?
YAGNI can be nicely combined with SRP: When you apply YAGNI, you wait until some change is actually happening. If this happens you should be able to clearly see the responsibilities which are inferred from the reason(s) for change.
This also means that responsibilities can evolve with each new requirement and change. Thinking further SRP and YAGNI will provide you the means to think in flexible designs and architectures.
Perhaps a little more technical than other smells:
If you find you need several "friend" classes or functions, that's usually a good smell of bad SRP - because the required functionality is not actually exposed publically by your class.
If you end up with an excessively "deep" hierarchy (a long list of derived classes until you get to leaf classes) or "broad" hierarchy (many, many classes derived shallowly from a single parent class). It's usually a sign that the parent class does either too much or too little. Doing nothing is the limit of that, and yes, I have seen that in practice, with an "empty" parent class definition just to group together a bunch of unrelated classes in a single hierarchy.
I also find that refactoring to single responsibility is hard. By the time you finally get around to it, the different responsibilities of the class will have become entwined in the client code making it hard to factor one thing out without breaking the other thing. I'd rather err on the side of "too little" than "too much" myself.
Here are some things that help me figure out if my class is violating SRP:
Fill out the XML doc comments on a class. If you use words like if, and, but, except, when, etc., your classes probably is doing too much.
If your class is a domain service, it should have a verb in the name. Many times you have classes like "OrderService", which should probably be broken up into "GetOrderService", "SaveOrderService", "SubmitOrderService", etc.
If you end up with MethodA that uses MemberA and MethodB that uses MemberB and it is not part of some concurrency or versioning scheme, you might be violating SRP.
If you notice that you have a class that just delegates calls to a lot of other classes, you might be stuck in proxy class hell. This is especially true if you end up instantiating the proxy class everywhere when you could just use the specific classes directly. I have seen a lot of this. Think ProgramNameBL and ProgramNameDAL classes as a substitute for using a Repository pattern.
I've also been trying to get my head around the SOLID principles of OOD, specifically the single responsibility principle, aka SRP (as a side note the podcast with Jeff Atwood, Joel Spolsky and "Uncle Bob" is worth a listen). The big question for me is: What problems is SOLID trying to address?
OOP is all about modeling. The main purpose of modeling is to present a problem in a way that allows us to understand it and solve it. Modeling forces us to focus on the important details. At the same time we can use encapsulation to hide the "unimportant" details so that we only have to deal with them when absolutely necessary.
I guess you should ask yourself: What problem is your class trying to solve? Has the important information you need to solve this problem risen to the surface? Are the unimportant details tucked away so that you only have to think about them when absolutely necessary?
Thinking about these things results in programs that are easier to understand, maintain and extend. I think this is at the heart of OOD and the SOLID principles, including SRP.
Another rule of thumb I'd like to throw in is the following:
If you feel the need to either write some sort of cartesian product of cases in your test cases, or if you want to mock certain private methods of the class, Single Responsibility is violated.
I recently had this in the following way:
I had a cetain abstract syntax tree of a coroutine which will be generated into C later. For now, think of the nodes as Sequence, Iteration and Action. Sequence chains two coroutines, Iteration repeats a coroutine until a userdefined condition is true and Action performs a certain userdefined action. Furthermore, it is possible to annotate Actions and Iterations with codeblocks, which define the actions and conditions to evaluate as the coroutine walks ahead.
It was necessary to apply a certain transformation to all of these code blocks (for those interested: I needed to replace the conceptual user variables with actual implementation variables in order to prevent variable clashes. Those who know lisp macros can think of gensym in action :) ). Thus, the simplest thing that would work was a visitor which knows the operation internally and just calls them on the annotated code block of the Action and Iteration on visit and traverses all the syntax tree nodes. However, in this case, I'd have had to duplicate the assertion "transformation is applied" in my testcode for the visitAction-Method and the visitIteration-Method. In other words, I had to check the product test cases of the responsibilities Traversion (== {traverse iteration, traverse action, traverse sequence}) x Transformation (well, codeblock transformed, which blew up into iteration transformed and action transformed). Thus, I was tempted to use powermock to remove the transformation-Method and replace it with some 'return "I was transformed!";'-Stub.
However, according to the rule of thumb, I split the class into a class TreeModifier which contains a NodeModifier-instance, which provides methods modifyIteration, modifySequence, modifyCodeblock and so on. Thus, I could easily test the responsibility of traversing, calling the NodeModifier and reconstructing the tree and test the actual modification of the code blocks separately, thus removing the need for the product tests, because the responsibilities were separated now (into traversing and reconstructing and the concrete modification).
It also is interesting to notice that later on, I could heavily reuse the TreeModifier in various other transformations. :)
If you're finding troubles extending the functionality of the class without being afraid that you might end up breaking something else, or you cannot use class without modifying tons of its options which modify its behavior smells like your class doing too much.
Once I was working with the legacy class which had method "ZipAndClean", which was obviously zipping and cleaning specified folder...