I am going to debug my asp.net core project in the windows server 2012R2 while the VSCode reports this.
Then I installed the .net core SDK.
However, the error above comes again.
Well, in the Programs and Features of Control Panel, it is installed already yet.
It is so strange that in the Powershell of dotnet --info.
It said that no SDKs were found.
Why it turns out to be this?
And how can I install the .net core SDK correctly?
PS: the computer is an X64 system.
I noticed that I have installed both X86/X64 Runtimes.
After I uninstalled the X86 Runtime, it works.
Related
I need to upgrade an application in a Windows Server 2016 machine, and in order to do so they require ASP.NET Core runtime to be v3.1.1 or higher. I have installed v6.0.8, but when running the application installer it seems to still be detecting the old version and therefore can't run the update. I checked the new version is installed using "dotnet --list-runtimes" and it shows OK. I have also checked the registry, and confirmed the new version is there. I have restarted IIS as well. But so far nothing. What could I possibly be missing? I don't have control over the application code, so I can't access the runtime json file to modify version used as I have seen in some solutions.
Any help, appreciated. Thanks.
I have a lot of legacy code that builds fine on Windows with .Net 4.5
I am trying to build the same on CentOS with dotnet-sdk for automation and licensing issues.
Following the Microsoft link after installing the required packages, this command fails
$ dotnet msbuild sharpTest.sln
/usr/share/dotnet/sdk/5.0.301/Microsoft.Common.CurrentVersion.targets(1216,5): error MSB3644: The reference
assemblies for .NETFramework,Version=v4.0 were not found. To resolve this, install the Developer Pack
(SDK/Targeting Pack) for this framework version or retarget your application. You can download .NET Framework
Developer Packs at https://aka.ms/msbuild/developerpacks
Since I installed dotnet-sdk-5, it seems the solution fails to build. But I could not locate .Net framework 4 for CentOS
How do I resolve this ?
It's referencing .NETFramework. .NETFramework V4.0 is not xplat and therefore not available on anything else than windows. You should try to re-target your solution to net5.0 and make it independent of Windows specific dependencies.
To re-target to net5.0 try the dotnet upgrade-assistant (it's a dotnet tool). Do this on a windows machine first. To address any windows dependencies that won't work outside windows or .NetFramework see the Overview of porting from .NET Framework to .NET
I have already installed VS2017 Enterprise 15.6.4. Recently installed .NET Core 2.1.101 SDK from official site
I was expecting .NET Core 2.1 as one of the target framework available if I create console or asp.net core application. Can someone help me understanding what I am missing here.
As suggested in comments, I installed 15.7 preview 2. Still no luck and same issue.
I have faced the same problem. I solved this by installing the right SDKs with Runtime for .NET Core 2.1.
Basically to run/create 2.1 projects from VS Preview, you need to install the "2.1.300" (not 2.1.4) .NET Core SDKs and Runtime. https://www.microsoft.com/net/download/dotnet-core/sdk-2.1.300-preview1 (this includes required Runtime already)
The good explanation of this misleading with versions i found here https://github.com/dotnet/cli/issues/8309 (dasMulli commented on Feb 24).
In case this helps someone else... After installing VS 15.9.2 my project that was working fine with 2.2 preview-3 stopped working. VS could not see the preview SDK. I could build the solution using dotnet.exe but not VS.
To solve this I created a global.json at the root folder of this solution pointing to the preview sdk. That allowed VS to see the preview version.
This is a change of behavior in VS between 15.8.x and 15.9.x.
To create the global.json you can navigate to the desired folder and type this:
dotnet new globaljson
Make sure dotnet PATH variables are in correct order
If you have installed an SDK for a different system architecture (e.g., if you installed 32-bit/x86 SDK on a 64-bit computer), then a new entry in the PATH variable would have been created for that specific location (e.g., C:\Program Files\dotnet or C:\Program Files (x86)\dotnet).
The problem is that Visual Studio, when searching for installed frameworks, will stop at the first PATH variable entry it finds that contains an SDK. So, if the first version you installed used an incorrect architecture, then you'll have to adjust the position of those entries before any of the correct SDKs will appear in the Target Framework drop down.
Source: this absurdly-hard-to-find comment within issue #8309.
TL;DR: Make sure the first "C:\Program Files\dotnet\" entry in your path variable you see in the list matches your system architecture:
64-bit = C:\Program Files\dotnet\
32-bit = C:\Program Files (x86)\dotnet\
Make sure that Visual Studio 2017 is up to date. Go to "Tools" -> "Extensions and Updates" to install visual studio updates. This resolved the issue for me.
I have faced the similar situation I tried to install the preview version of the dot net but it did not help.
However after I updated visual studio (from 15.8 to 15.9.6 ).
I Could see dot net core 2.1 in the target framework.
Updated to Latest VS 2017 and installed latest .Net Core SDK.
Changed global.json to point to latest version installed.
This resolved for me.
I had faced the similar issue. I then just updated my Visual Studio 2017 to 15.9.16 version and restarted the system. The problem got resolved.
I was facing the similar issue, I uninstalled the .Net Core 2.2 runtime and then from the below link:
https://dotnet.microsoft.com/download/visual-studio-sdks?utm_source=getdotnetsdk&utm_medium=referral
Install the .Net Core 2.2 Visual Studio SDK, Restarted the Visual Studio and my issue got resolved, .Net Core 2.2 is now getting listed in Target Framework list in the project properties in Visual Studio 2017 Version 15.9.16
I created a new project under .net core 2.1 and it was ok but in my old project have not appeared. So I opened both ".cproject" files and compared them together and found the problem.
Open your project's ".cproject" file in a text editor then replace below line
<TargetFramework>netstandard2.1</TargetFramework>
with this one:
<TargetFramework>netcoreapp2.1</TargetFramework>
We're about to deploy a netcore 2.0 application on production, but we need to install .NET Core Runtime and SDK first. Is a restart needed for the installation to take effect? Since it's production, we don't want that to happen.
We installed the following from here
x64 Installer (SDK)
x64 Installer (Runtime)
Windows Server Hosting (Runtime)
There was no need to restart the machine and nothing blew up (:
If you are creating a Windows Service using the .NET Core SDK (Microsoft.Extensions.Hosting.WindowsServices) and deploying it in the target machine you need a restart (atleast a log off depending on the application you are running). Here is what happens.
Install .NET Core Runtime
Deploy a windows service.
You will notice that the command line in the windows service will be "dotnet "
Start the service. It will fail because it cannot find the tool "dotnet".
This is because the service control manager (services.msc) is not aware of the dotnet command being added to the path. So you can either do a log off (or)restart to make sure things work.
You could just install Windows Server Hosting Bundle without SDK on your production machine (actually it should be).
But then you'll get 502.3 error, and you could add a element as follows into {YourProject}.csproj file, and then it'll work like a charm.
<PropertyGroup>
<PublishWithAspNetCoreTargetManifest>false</PublishWithAspNetCoreTargetManifest>
</PropertyGroup>
Ref: https://github.com/dotnet/coreclr/issues/13542
With respect to either:
.NET 6.0 Desktop Runtime (v6.0.2) - Windows x64 Installer Link
.NET 6.0 Runtime (v6.0.2) - Windows x64 Installer Link
... a reboot is not required.
I didn't have time to test:
ASP.NET Core 6.0 Runtime (v6.0.2) - Windows Hosting Bundle Installer Link
ASP.NET Core 6.0 Runtime (v6.0.2) - Windows x64 Installer Link
... but agree with #MuqeetKhan that you should ideally have both a dev && testing lower environment before performing a production install. (Though, I also understand with smaller co's, that due to constraints & battles lost; this may not be possible.)
I tried to change the Target Framework on my app recently from .NET Framework 4.5 to 4.5.2, but if I do I get the following error when trying to build: "'Forms' is not a member of 'Windows'" (that is, System.Windows.Forms). Changing to 4.5.1 works normally. I'm using Visual Studio 2013 Ultimate.
I had this error when changing to 4.5.2.
In my case the error was related to a MessageBox ... I replaced: "Windows.Forms.DialogResult.Yes" (which caused the same error message) with "System.Windows.Forms.DialogResult.Yes" which did the trick.
I had the same problem, me too with Windows.Forms.DialogResult enumeration values.
The project automatically imports System and System.Windows.Forms namespaces and worked fine up to 4.5.1.
In 4.5.2 I had to remove Windows.Forms. and just leave DialogResult.Ok (or whatever else) in my code, it seems to be a problem with namespaces resolution.
Make sure that you add System in front of the Windows.Form.
I ran into this with an application still targeted to .NET 4.0, where it failed on one (new) build server, but ran on my older ones.
I narrowed it down to the .NET 4.0 Targeting Pack only being installed on the old build servers. Targeting pack is included in Visual Studio, or the Windows 7.1 SDK. It is for some reason not distributed separately, and with support ending for .NET 4, 4.5 and 4.5.1, I don't suspect this is likely to change. Because my older servers have been around a couple years, they've gone through in-place upgrades and so had the targeting pack already.
When you install Windows 7.1 SDK on Server 2012R2, it complains something to the effect of "A pre-release version of .NET 4 is installed, please install the RTM version". As far as I can tell, it's simply because a newer version) is installed -- Server 2012R2 comes with 4.5.1. I tried to uninstall all newer versions, but was unable to get the SDK to install the targeting pack.
So to install:
Download the Windows 7.1 SDK ISO image
Unzip it
Run Setup\MTPack\netfx_dtp.msi EXTUI=1
You should now have a %programfiles(x86)%\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\ folder with the 4.0 stuff.
(EXTUI=1 bypasses the restriction that it can't be installed separately).
This allowed me to compile projects still targeting 4.0 (or re-build old revisions/branches that were targeting it at the time).