I am currently working on adding data from a stored procedure into a dataframe and then outputting the dataframe to a treeview. The columns headers for each query that is run within the stored procedure are different and I have 4 queries running within the stored procedure. I was wondering if there is any way to have it so that once one of the queries data has been printed to the treeview, I can display the next query with its columns headers below the one that came before it. I have attached an image below to give an idea of what I am looking for. If there is a better approach to this I am open to new ideas since I am fairly new to tkinter.
Related
ok so I have this report I have to write in SSRS with a very specific format. It looks like the screenshot below at the bottom. Ignore the arrows and colors. It's pulling from an Oracle database. Each number value cell in this table/matrix has a different sql query to pull it in because they come from different tables, etc.
the top half of the numbers in the table are each from a query. the bottom half of the table is all calculations from the numbers in the top half. I already have the queries for the top half and was trying to figure out how I could just use those to make this table in SSRS with just those and then creating calculations in the bottom half for the report. I can't use a table or a matrix because each query is a different dataset and you can only have one dataset per tablix.
I was thinking maybe doing textboxes and drawing the grid manually, which would be a huge pain. I get errors about not having an aggregate and being out of scope or something and haven't figured out the reason for this yet as it is not my ideal solution.
My current solultion that will eventually get me there is unioning every single query and then creating columns with static values for the rows and columns in the grid and turning it into a matrix. Problem with this is it continues to increase in complexity as I create each further down the table calculation, and the code becomes larger and larger, and takes a long time to create, and I have to do like 6 reports similar in nature to the format of this one. Will probably be a thousand lines of sql and force me to have to make a stored proc because of the ssrs character limitation.;
So my question in a more simple way is, how can I take multiple sql queries that return a static value and make them a single value in a tablix that doesn't repeat, then create more blank rows in that tablix that are calculations of other cells values, i.e. Textbox1 - textbox2, textbox3/textbox4 ?
I got it figured out using expressions with multiple datasets. The answer seemed too easy once I found it. Basically just created a table tablix using my first dataset. Created more detail rows with insert row inside group below. Then I went to the expression builder for each one and found the other dataset and double clicked it to get the expression to pull from the other dataset. For example the bac_labor dataset value would look like this. =Sum(Fields!BAC_LABOR.Value, "BAC_Labor")
Then for calculations can use either same thing like =Sum(Fields!BAC_LABOR.Value, "BAC_Labor") + Sum(Fields!BAC_LABOR_OVERHEAD.Value, "BAC_Labor") or could do something like this =ReportItems!Textbox2.Value - ReportItems!Textbox1.Value to reference a cell value. This saves a ton of time, development effort, and reduction of code for calculations, compared to adding together 500 character select statements to make calculations. Also no need to use stored procs and union or join every select statement together with this method.
I'm using JScript and SQL Server 2012 to verify a grid in a UI.
Is there a way to compare SQL results to a single column? The entire grid is mapped, but nothing else. Even with the Map Object From Screen tool, I can't highlight a single row or column.
I've searched every property and mapped item I could find, but nothing get me closer to what I need.
Thanks in advance.
Separate rows, columns or cells are not UI objects. Using TestComplete, you can create a Table checkpoint and specify that only a single column should be verified. More information on table checkpoints in TestComplete can be found in the About Table Checkpoints help topic.
I'm still relatively new to SQL and Pentaho.
I've pulled a table with two different IDs and need to run a query for each specific instance.
For example,
SELECT *
FROM Table
WHERE RecordA = 'value in column A'
AND RecordB = 'value in column B'
I need the results back, either appended to new columns in the original table or part of their own text file output.
I was initially looking at using a formula for this inside of Pentaho, but couldn't quite figure it out. Since I have the query written I threw it into Excel and got the concatenated results (so a string of 350 or so queries that I need to run). I'm just not sure how to accomplish this - I tried the Execute SQL Script inside of Pentaho but it doesn't seem to do output?
Any direction would be useful. I've searched a little but have come up short so far, possibly because I am still pretty new to this platform.
You can accomplish this behavior in a lot of ways, with a "Database Lookup" step for example, but I usually do that in a quite easy way and here is a example for your tests, I hope it helps.
The idea here is to have two Table input steps, the first one will fetch the IDs we want to look at. For example you may use a SQL query similar to note on the left. The result will be a 1 column stream of rows.
Next we have a Table Input that reads the rows received and executes it's query for each row. I'll add a screenshot with the options that I selected.
What it does is replace a placeholder '?' with the data that is received. If you need two columns use two '?' but remember that it will replace the first one with the first column and the second one with the second column
And you are good to go. Test it a couple of times and good luck.
And the config for the second table input.
For the sake of clarity, I'm not looking for the transpose function, like has been asked previously on this site quite a few times.
The excel table object (Insert>Table) is exactly what I want. All I'd like to do is rotate the table for readability purposes. Currently, I have far more columns than rows, and it would improve readability a lot if the axes were flipped so that the vertical aspect of the scroll wheel could be used while looking at the data
My current data is a list of machining jobs. Each row is one job for one customer, and each column is a different parameter corresponding to settings/cost/material. With the tables, I'm able to dynamically sort the jobs in the table based on each of the parameters in a very helpful manner. This is the most important thing: to continue being able to dynamically sort based on the parameters. So far, I have been unable to find a way to transfer dynamic sorting to row headings instead of column headings.
I had a problem in creating the Dynamic report in SSRS. My problem is:
In a table I have stored SQL scripts with the column SQLScripts. If you execute these SQL scripts you get different number of columns for each script.
My problem is, I have one report with buttons of these scripts, for example test1, test2...like that. If you press test1 button this should take the test one SQL script and should display the report with appropiate columns in that sqlscripts.
I can't create individual reports for each test report, they are plenty. Are there any options for me to solve this problem...
The only way I've been able to get this to work sofar is:
Each report has 2 datasets.
ReportData
DataHeaders
The "DataHeaders" need to have the proper name of the datafields in "ReportData". Be careful since SSRS replaces blanks and special characters with "_"
Now, create a table (or matrix) and drag the DataHeaders as the Columns of your report. (This should be a grouped column). If you run it at this point, you'll see all your columns without any data. Now comes the magic:
Create another report that takes a "DataField" parameter. Create another table or matrix within this report and set it's dataset property to be "ReportData". In the DATA cell for the table, set it to the expression =Fields(Parameters!DataField.Value).Value
Now go back to your first report. Right click and insert a subreport. Right click on the subreport and select "Subreport Properties". Under general, select the second report you created to be used as the subreport. Under parameters, select the DataField parameter and set its value to something like =Fields!DataField.Value
In my case I did some formatting in this expression to fix the above mentioned issue with spaces and special characters, since my stored procedure was initially used in ASP.NET and this was just a proof of concept.
Also in my experience the performance isn't great. In fact it was kinda slow, though I haven't had a chance to switch it to use a shared dataset, which I suspect would help a bit. Please let me know if you find a better solution.
I have not found a way to do this completely dynamically. Here is a similar question with some possible solutions:
How do i represent an unknown number of columns in SSRS?
You basically need to create a 'master dataset' from the other Datasets that are based on your multitude of SQL scripts first.The master dataset should contain the data to be presented in it's most simplistic form, i.e. in a simple list format.
Finally, go to the toolbar in SSRS and drag a 'Matrix' into the report. A Matrix table acts similar to a pivot table in Excel or a CrossTab query in Access that will display whatever's in the Dataset.