We are using the MIP(Microsoft Information Protection) SDK to apply labels to files.
However, there are cases where the MIP(Microsoft Information Protection) SDK cannot be used in other specific legacy systems, and it is necessary to check whether the MIP(Microsoft Information Protection) is applied to the file inside the system.
We want to know if there is a way other than the MIP(Microsoft Information Protection) SDK to know if a file has MIP applied or not.
For example, we can predict the file type by reading the start bytes of the file.
.docx, .xlsx, .pptx : 50 4B 03 04
.doc, .xls, .ppt : D0 CF 11 E0 A1 B1 1A E1
.pdf : 25 50 44 46
Thanks.
Related
I have requirement where I need to parse MuleSoft Flat File Schema to parse incoming file content, input file row to parse it and convert to Mule object. It should include parsing of multiple rows in a file with 5-7 attributes per row. I have seen many examples but no one is explaining how can we create flatFile schema to process the flat file in anypoint studio.
Could you please help me for the same.
Input file -
1220612WEBL23555606CA01
200000162608361 FFVV220606D915552982635 4TKTT0140MAZUR/ISWAR APRIL C YXYYXY /C9F6R1 MTHO DTD 0000
G002389100000000000CAD2070231 0 996AC 001 RESLE BALANCE
700CAD 0.00 NO ADC 00 0 00142152020558 Y262990535
889486594HGMRNL8785 00000000000082204CAD2 CC5 0423 0423 000000000020512 00000000000 CAD2 EX 000000
8002389 00000000000 CAD2 CA 00000000000 00000000000 00000000000
9002389 AGT6490/00 CASH
Z00625
The basic steps are simple:
Define the structure of the file. You need to understand the records
and fields of the file completely.
Convert that definition into a Flat file schema. Read the documentation, if the file has simple records structure it should be
very direct.
Use the schema in a DataWeave transformation
Flat file format are usually custom defined. It is very very unlikely that there is a tool to automatically translate it to a flat file definition since they lack delimiters and structure. You will have to read the definition of the structure and create the flat file schema manually. For that you need to understand how the flat files schemas are structured by reading the documentation. They are not complex, but you may want to start with simpler examples until you get the hang of it.
I received a large number of document files, where each document has its own split archive for each page (i.e. file1.001,file1.002,file2.001,file3.001). These are meant to be TIF files that can easily be combined and converted into PDF documents.
However, some of these files will not convert through imagemagick. Some can simply be converted using a different program, which works fine. There are some files where this doesn't work. I tried converting them to .jpg, then to tif, but they won't convert to .jpg. Things got weird when I converted them to .png, as some of these files would have multiple output files associated with them.
This is hard to explain, but I'll try and give an example; file1.001 and file1.002 both have the same image present on them when converted to tif and opened. However, when either of the tif documents is converted to a .png, two .png files are created. One has the original page, but the other one has a second page of the document that I could not view previously.
What could be causing this weird behavior, and how can I convert these to pdf more reliably?
I also used BlueBeam Staple to convert the files, if that helps at all.
Edit:
I've verified I'm on the latest imagemagick release, and I've been using it through PHP to process files. I'm running Windows 10.
Also, here's some example files to play around with. The first TIF actually shows the second page, instead of the page I normally see when I open the file.
Edit 2: Sorry, I thought uploading the image would preserve the file type. Here's a link to some test samples
When I convert your tiff to png, I get two files using IM 7.1.0-10 Q16-HDRI or IM 6.9.12-25 Q16 both on Mac OSX Sierra.
magick -quiet 294944.tif x.png
Produces:
and
Is this not what you get or expect?
P.S.
What are the other two files: 327924.001 327924.002
If those are some kind of split tiff, then it does not look like libtiff, which Imagemagick uses to read TIFFs can handle them. I get errors when attempting to use identify on them.
You definitely have some issue with whatever attempted to write those tiffs.
instrument 294944 page 1 of 2 = G4 199 dpi sheet 2 of 2 294944.tif (25.17 x 17.53 inches)
instrument 294944 page 2 of 2 = G4 199 dpi sheet 1 of 2 294944.tif (24.12 x 17.63 inches)
instrument 327501 page 1 of 1 = UN 72 dpi sheet 1 of 1 327924.001 (124.78 x 93.86 inches)
instrument 327924 page 1 of 2 = G4 400 dpi sheet 1 of 2 327924.002 (23.80 x 17.53 inches)
instrument 327924 page 2 of 2 = G4 400 dpi sheet 2 of 2 327924.002 (23.84 x 17.41 inches)
Two are identified as CCITT Group 4 Fax Encoding which is common for TIFFs of this type.
Tiff is a multi image format so a multipage FAX can be viewed as one file or 4 different printing CMYK colour plates could be sent as one image file for either overlay as one check print or printed one at a time for quality inking.
The file name Tif (or tiff) is usually applied to files with one or more pages (even 400+ for a long novel)
The extension part001.tif part002.tif is usually applied to groups of multiple pages OR for single sequential pages part1.001.tif part1.002.tif
Unfortunately for you you have a mix following a convention that seems to indicate number of pages 002 = 2 pages, but in inconsistent order, so need to check which were used for each file, as there is uncertainty.
Also the internal number does NOT always reflect the filename? perhaps transfer of interest ?
IN ADDITION you have a mix of compression methods and resolution thus cannot be sure of correct scale to be applied.
The best way to resolve this issue is decide how you wish them to be regrouped/sequenced and use the correct scale for each page or group of pages then recombine as desired into PDF.
It would help for a large number to tabulate the pages by number scale size compression etc and then process in identical groups before reorder and merge.
is there a way to link cinema 4d R20 asset files (materials and other content packs) to cinema 4d R21 without copying or downloading it again in cinema 4d R21 as i have already did it in cinema 4d R20. Thank's alot in advance
Yes there is a way.
Just look on your harddrive for the *.lib4D Files, if you built your own set of materials, you can export it before from cinema 4D as a Set;
I guess your files are under "application folder" inside the "library/browser/ " - directory; (there's a second place where it could be stored if you type "%appdata% into your Windows-Explorer, but in general it would be in the application folder/cinema 4D R20/library/browser)
Now just copy them into the same place in Cinema 4D R21/library/browser.
That's it :-)
If you just want to "link" it like you said, under your preferences you can define where your materials are stored
There are different similar ways, as I know there is a possibility to do that via CommandLine
(in R16/R17 I know, you could also change a config file (resource\config.txt) to change the path; I am not sure if this is still working but I will have a try when I am at home)
I have, what I believe to be, a FoxPro Backup file with file extension .02A.
The first seven characters of this 150MB file are ' !Pƒõ' in hex: 1F A0 21 50 83 9D F5.
Who knows what kind of file this is exactly and how do I get to the contents?
1F A0
Is associated with .tar based zip files as found at
Wikipedia List of file signatures
I tried to compile a simple program I wrote, but I am getting the following error:
:compile chris_programs fileprinter
fileprinter
.
[235] attempt to write into update protected file!
The chris_programs file is a Q pointer to the directory /u/chris_programs.
# pwd
/u/chris_programs
# ls -al
total 16
drwxrwxrwx 2 root system 256 Jun 16 06:58 .
drwxrwxrwx 15 root system 4096 Jun 13 17:40 ..
-rw-rw-rw- 1 root system 72 Jun 16 07:03 fileprinter
Here is the md entry for the chris_programs file:
DICT md 'chris_programs' size = 45
01 Q
02
03 /u/chris_programs
Glad to see you're getting comfortable with those super q-pointers. The issue here is that the object module goes into the Dict of the file hosting the BASIC source. But when you're using a host OS path without specifying a dictionary, it doesn't know where to put the object code. For this I would recommend the following:
create-file dict chris_programs 3
(Copy your md q-pointer to a different name first or you won't be able to use the same name.)
There will be a default q-pointer put into that dict file, which points any references to the data file back upon the dict (so dict and data are the same space). You can then copy the q-pointer you already have (renamed per above) into the dict to replace that item:
copy md renamed_pointer (o
to: (dict chris_programs
So now your source will be in the host file system and the object will be in D3.
There is a way to have both dict and data in the host OS but I don't recall the syntax at this time. I'll try to update this later with that if I get the info.
I recommend against a follow-up of "but I really want everything in the host OS!" The object code serves no purpose outside of the DBMS so you might as well keep it there. As to the source, well, I put some source at the OS level too for source control (integration with Subversion), to use with other editors, and to share with other MV DBMS's. Unless you're doing something like this, I'd advise you to keep all source and object in the DBMS. If you want a better editor, AccuTerm wED (Windows Editor) is a GUI with syntax highlighting and many other features. We can discuss that separately if that's your goal.
EDIT : The following is intended to provide a solution to the desired problem, outside the limitations of the faulty steps already taken.
Let's go back to fundamentals: Source code is in the data file, object goes in the dictionary. Here's how you link OS-level source to DBMS-level object.
create-file dict bp1 3
There will be a default q-pointer put into that dict file, which points any references to the data file back upon the dict (so dict and data are the same space). You can replace that reflexive pointer with a new one to the host OS. Use ED or whatever editing tool you prefer but the idea is:
ed dict bp1 bp1
The pointer item in the dict has the same name as the dict. Replace that item with the following:
01 q
02
03 /path/foldername
The line numbers are only for reference, don't type those in. Substitute the path as required. Your D3 user (as specified in the pick0 OS file) must have r/w access to that path.
So now you should be able to do something like this:
ED BP1 TEST1
01 CRT "SUCCESS"
COMPILE BP1 TEST1
RUN BP1 TEST1
You'll find TEST1 in /path/foldername. If you LIST DICT BP1, you'll see the BP1 pointer to the data file as well as an item for the object module for TEST1.
Rather than retrofitting what you have, please just follow this and you should be successful within a few minutes.
See note above about "but I really want everything in the host OS!"
Another approach to source control (not the same but close): Keep everything in the DBMS. Periodically t-dump your source to an OS-level backup file, or copy to a folder. Then source-control that OS data. This eliminates the direct connection between the OS and the programs, which most D3 people don't understand anyway.