When I interact with Unreal 5.0.3 main menus or short menu the mouse become very laggy and the editor sometimes crash, is there a solution to this ? I tried disabled all startup apps but did not work.
The same issue has been resolved by turning off the automatic hiding of the taskbar.
I found strange result I have two monitors one is AOC VA and the other is Benq IPS both are QHD 144hz but when I move the editor to Benq monitor, my main monitor, the problem appear but when I move the editor to AOC the menu respond normally dont know why !!
Related
I have a bug which is completely over the planet. IntellIJ doesn't display. It's on, yet doesn't display.
It worked well before, last thing I did was re-setting up new dependencies on my code and (nothing to do with that) re-setting SDK for other reasons, both of which shouldn't be linked to display properties.
As you can see it's working, I see the pop up windows:
But doesn't display:
Yet I can see IntelliJ windows with Shift + Tab:
and yes, my screen doesn't duplicate, so it's not hidden in another dimension or something
I tried:
restart computer
uninstall install IntelliJ
uninstall install IntelliJ without previous parameters
try other JetBrains software, like DataGrip, it works and displays well
call a homeopathic doctor
Unsuccessfully. So I knee and await before your judgement of this critical situation.
I have this exact same behavior happen to me when I use IntelliJ at work and then go home and try to use it via Remote Desktop. Its very strange (regardless of which monitor I leave it on at work when I leave).
If I hover over it in the task bar and then hover over the thumbnail for the running app, I can right click and tell it to maximize and it magically comes back into focus. Sometimes I have to tell it to restore and then to maximize before this works.
Occasionally even this doesn't work and I have to close it, re-open, and do the same. It makes no sense, so I understand your frustration.
It works
As John Humphreys - w00te mentionned, click right over the thumbnail (I insist: the thumbnail ! Not the taskbar icon) and then select maximize and voilà.
Bon appétit.
Thanks for your contribution and I hope it will help some people in need here.
I have had this issue when I have moved from a dual monitor setup to a single monitor setup or a different dual monitor set up. The issue here that intellij window seems to save and use the coordinates of the last dual window setup to render the window. It doesn't matter you restart your computer, it will always try and render to that position, even if that position is not visible on the new monitor set up. On windows there is an easy way to fix this issue. Go to your display setting and flip the order of the windows. The intellij window should now be visible. you can drag the window to the your other monitor and re-arrange the windows back to the order you had previously. After that, you can place the intellij window wherever you want.
In my case I noticed there is a 1 pixel thick gray line on my screen, turns out that was the IDEA window and I could resize upon hovering that line. Needless to say it wasn't me shrinking it.
I have this same behavior, It happens to me when I connect a monitor in extended mode and move the intellij window to the monitor, then disconnect without moving it back. No other solution other than to connect to monitor again and bring it back to the original window for me works.
On mac, select the app from the app tray so that the menu for it appears up top. Then on the menu up top, go to Windows->Zoom and it should expand to fill the viewport.
From there you can drag it down to size and reposition.
I would like to remove the Desktop tab from KDE Plasma desktop environment and get rid of the context menu. Is there a way to do this ?
Hi Chris, Thanks for the reply. I am running KDE 4.14.8. I am not seeing what you are describing. The context menu is the menu when you right click on the desktop. I think you are calling it "desktop menu". My original snapshot show that menu. That menu changed depending what desktop theme I selected. I could not find anything call Configure Desktop. The closest thing to that would be Default Desktop Setting and there is not there about the Tweaks tab. The project that I am working on is kind of mission critical. It would be just a plain desktop without anything. The only thing the user can do is log on, does his job and log off. All the things that can distract the user will be removed. I got most of them except for this pesky toolbox.
To remove the toolbox:
right-click on desktop to get the desktop menu
select Configure Desktop, a dialog appears
switch to Tweaks tab
uncheck Show the desktop toolbox
You can also drag it to a corner (when widgets are unlocked), then it will not show the current activity name, but will still be accessible.
For some reason Intellijs text cursor keeps following my mouse and highlighting everything. Is there some setting that can do that? I can't seem to find it from searching the settings. Where else could it be?
If you have a touchscreen try touching it somewhere. It helped me to solve the issue.
Found the solution in this thread on the JB website.
I use a touch screen monitor and i deal with the same issue. my mouse cursor remained in selecting state and highlight every thing.
I touch somewhere on the my monitor screen once and solved this problem without closing app.
Other solutions are:
close and open app
/ restarting computer
I had that problem twice on two different computers in different jetbrains IDEs, gogland and pycharm.
The solution, as annoying as easy, restarting of the machine. Restarting the IDE or even up/downgrading did not help.
Solution
Go to setting
Search for mouse
In the editor action, edit the Add rectangular selection on mouse drag
I use idea on ubuntu linux w/ 2 monitors. I often pull up 2 projects so I can copy stuff from one to the other, and I have one project in a window on
one monitor screen, and the other on the second screen.
My problem is this: when I open the second project in the 'non-primary' monitor screen, and i click on an item in the top level menu bar
the menu pop up displays on the primary monitor screen...not the secondary one... it does not matter if I have the project in the secondary
monitor window maximized or not... the pop up just drifts over to the primary monitor screen..
it is not a fatal error.. I can move my mouse over to the first monitor window and click on the sub menu i want..
but it is so annoying. I'm wondering if this is a bug, or perhaps there is a work around for it ?
Also posted on IntelliJ user community board. If they answer, I will post the response here.
That is unfortunately a Ubuntu specific bug. I recommend you vote for and track it: Pop-up dialogs are sometimes misplaced on Ubuntu 12.04 with dual screens
I can suggest 2 workaround solutions for this issue.
Workaround 1
I use Intellij on my right hand side monitor. But the menus are displayed on left hand side monitor. So, I opened "Displays" configuration and moved the right hand side monitor to the left. Now, the menus are displayed on the correct monitor. Note that, the monitor is still stays on my right hand side:).
Workaroud 2:
Downgrade to JDK 1.6.
I want to move back/forward between editor tabs, using the two additional ("virtual") mouse buttons I have (RAZER DEATHADDER BLACK).
In Eclipse it's possible by default.
In IDEA I go to File->Settings->Keymap->Main menu->Window->Editor Tabs.
There I have Select Next Tab with the deault Alt+Right shortcut.
Then I open the Add Mouse Shortcut.
In that dialog I try to assign the back button of my mouse but without success. It doesn't react at all.
Anyway, googling a bit I've found this thread. I quote Alexey Gopachenko which seems to be an employee of IntelliJ:
As stated above - we can't support buttons if JDK on your platform
does not support them - and obviously it does not.
Anyway, that is totally wrong. My platform does support these keys - I actually work with them, on the same platform, on Eclipse and any other app, so it's IDEA who ignores them.
I'd appriciate a solution - how do I assign these back/forward mouse buttons?
UPDATE #1
I've found out that IDEA uses its own JAVA distribution (C:\Program Files (x86)\JetBrains\IntelliJ IDEA 11.1.4\jre on Windows 7), instead of the system's one - WHY?!
I'm almost SURE that is the reason I cannot use extended mouse buttons.
I've tried to trick IDEA by creating a custom Windows shortcut. Didn't work. I've also tried to create a SYMLINK in windows to my other, system-wide JRE distribution. Didn't work as well.
If someone come up with an idea on how to make it work with the system's JRE instead of its own - I think that'd solve the issue.
UPDATE #2
The above update #1 is not the issue.
I also had the same problem under OS X El Capitan. I just tried to add a new Keyboard-Shortcut and pressed than the Button 4 on the mouse and this worked.
Back/Forward mouse shortcuts work fine for me with Razer Mamba mouse, for example Back action is assigned to Button4 Click and I can confirm that it is recognized in this dialog when I click on the Click Pad area:
If it doesn't work with your mouse for some reason, you can try to workaround the problem using the Razer Configurator macro or key assignments:
Use the assigned key in IDEA keymap settings instead of the mouse shortcut.
Note that Eclipse is SWT based while IDEA is Swing based, so mouse event management is completely different. If JDK cannot recognize your device button clicks, it will not work in any Java Swing applications (NetBeans, JEdit, etc). In some cases running IDEA under a more recent JDK version may help (if support for your device was added in the newer JDK release).
I'm experiencing the exact same thing suddenly.
I realized my most recent change was to start using idea64.exe rather than idea.exe.
I switched back, and my mouse buttons are working fine again.
So, while this is not a complete answer, it seems as if it has something to do with the 64-bit version.
If the Razer driver's button mapping feature doesn't allow different mappings for a particular program, you can just assign the buttons to the mouse button number choices (mouse button 4 / mouse button 5) and then install a third party app that does support mappings for particular programs, e.g. https://superuser.com/questions/562972/how-to-map-bind-mouse-button-as-keyboard-button-in-windows-7
This question helped me although I have a Logitech Marathon Mouse M705, so I thought that I would share the solution in case other Logitech owners was in search for this.
I have a similar problem with a Logitech mouse and idea64.exe
Fortunately their SetPoint software allows for program specific settings.
This setting will have to be deleted and then reconfigured whenever you update IntelliJ and get a new idea64.exe :-)
I am experiencing a very similar problem and wanted to share my findings. I just bought a new Logitech M705 mouse. Within intelli-j the scroll right and scroll left buttons do not work. The forward and backward buttons also do not work.
I typically run intelli-j as administrator because I need higher privileges to run various tomcat services. When logging in as that user (rather than right clicking and selecting run as admin) all the buttons work! Also, when running as my normal user all the buttons work.
Also very curious is that I have an older generation Logitech mouse (same model, M705). This mouse has no problems with the scroll buttons and forward-back.
My solution for now is to use intelli-j as the user I am logged in as.
Check out this little tutorial from BetterTouchTool here. Basically for some mice (like Logitech ones) using the settings application they come with you can map default button actions to clicks and in doing so set a button number and use it as normal.
This works for my Logitech Performance MX mouse.
You can add mouse shortcuts, just click on an action in keymap and add mouse shortcut.
Alternatively Ctrl+Tab brings up switcher, which may be less clicks to navigate.