Intellij cursor keeps following mouse and highlight - intellij-idea

For some reason Intellijs text cursor keeps following my mouse and highlighting everything. Is there some setting that can do that? I can't seem to find it from searching the settings. Where else could it be?

If you have a touchscreen try touching it somewhere. It helped me to solve the issue.
Found the solution in this thread on the JB website.

I use a touch screen monitor and i deal with the same issue. my mouse cursor remained in selecting state and highlight every thing.
I touch somewhere on the my monitor screen once and solved this problem without closing app.
Other solutions are:
close and open app
/ restarting computer

I had that problem twice on two different computers in different jetbrains IDEs, gogland and pycharm.
The solution, as annoying as easy, restarting of the machine. Restarting the IDE or even up/downgrading did not help.

Solution
Go to setting
Search for mouse
In the editor action, edit the Add rectangular selection on mouse drag

Related

Open Unreal 5 editor menus make my mouse lag

When I interact with Unreal 5.0.3 main menus or short menu the mouse become very laggy and the editor sometimes crash, is there a solution to this ? I tried disabled all startup apps but did not work.
The same issue has been resolved by turning off the automatic hiding of the taskbar.
I found strange result I have two monitors one is AOC VA and the other is Benq IPS both are QHD 144hz but when I move the editor to Benq monitor, my main monitor, the problem appear but when I move the editor to AOC the menu respond normally dont know why !!

Fix JetBrains IDE graphic bug where menu windows are displayed across multiple monitors

Many IDEs from JetBrains have this annoying graphic bug (IntelliJ & PyCharm, and probably WebStorm / PhpStorm too): while on dual screens, when you open menu or right click somewhere, if it's close to the edge of the screen, and there is another monitor next to it, the window is displayed across both screens and is very poorly readable.
I have been dealing with that issue forever but I forgot how to fix it. I always struggle to find the answer and I can't find it again this time, so I'm creating this question for posterity. Does anyone know how to fix this? Thanks.
This is the IDEA-157583 issue. Unfortunately there is no known reliable workaround. The issue has some workarounds that help some users e.g. see one, two, three. See also other comments in that thread or in linked issues.

IntelliJ doesn't display... at all

I have a bug which is completely over the planet. IntellIJ doesn't display. It's on, yet doesn't display.
It worked well before, last thing I did was re-setting up new dependencies on my code and (nothing to do with that) re-setting SDK for other reasons, both of which shouldn't be linked to display properties.
As you can see it's working, I see the pop up windows:
But doesn't display:
Yet I can see IntelliJ windows with Shift + Tab:
and yes, my screen doesn't duplicate, so it's not hidden in another dimension or something
I tried:
restart computer
uninstall install IntelliJ
uninstall install IntelliJ without previous parameters
try other JetBrains software, like DataGrip, it works and displays well
call a homeopathic doctor
Unsuccessfully. So I knee and await before your judgement of this critical situation.
I have this exact same behavior happen to me when I use IntelliJ at work and then go home and try to use it via Remote Desktop. Its very strange (regardless of which monitor I leave it on at work when I leave).
If I hover over it in the task bar and then hover over the thumbnail for the running app, I can right click and tell it to maximize and it magically comes back into focus. Sometimes I have to tell it to restore and then to maximize before this works.
Occasionally even this doesn't work and I have to close it, re-open, and do the same. It makes no sense, so I understand your frustration.
It works
As John Humphreys - w00te mentionned, click right over the thumbnail (I insist: the thumbnail ! Not the taskbar icon) and then select maximize and voilà.
Bon appétit.
Thanks for your contribution and I hope it will help some people in need here.
I have had this issue when I have moved from a dual monitor setup to a single monitor setup or a different dual monitor set up. The issue here that intellij window seems to save and use the coordinates of the last dual window setup to render the window. It doesn't matter you restart your computer, it will always try and render to that position, even if that position is not visible on the new monitor set up. On windows there is an easy way to fix this issue. Go to your display setting and flip the order of the windows. The intellij window should now be visible. you can drag the window to the your other monitor and re-arrange the windows back to the order you had previously. After that, you can place the intellij window wherever you want.
In my case I noticed there is a 1 pixel thick gray line on my screen, turns out that was the IDEA window and I could resize upon hovering that line. Needless to say it wasn't me shrinking it.
I have this same behavior, It happens to me when I connect a monitor in extended mode and move the intellij window to the monitor, then disconnect without moving it back. No other solution other than to connect to monitor again and bring it back to the original window for me works.
On mac, select the app from the app tray so that the menu for it appears up top. Then on the menu up top, go to Windows->Zoom and it should expand to fill the viewport.
From there you can drag it down to size and reposition.

For intelliJ 12.X how do i get the console back in the debugger?

Just like this question here:
IntelliJ: After hiding my "Output" sub-panel within the "Debug" panel, how do I get it back?
I canno get the log/console viewer back in debug mode.
The suggested solution in the given question no longer works the "restore layout" button does nothing, and the "certain spot" on the debug is extremely vague at best.
Is there a way to retrieve the console if it gets vanished (or better yet, just stop that button for vanishing it from even existing)?
I am using IntelliJ 12 Ultimate. If the restore layout didn't work for you either, this should fix the problem:
Open the Debug panel.
Keep mouse on the Debug tab and move it straight right to the Watches icon.
You may see a few more more icons here, and Output may or may not be visible (not visible for me)
If visible, click it and the Output view will be restored.
If not visible, move your mouse slowly to either side of the Watches icon and an empty block would highlight indicating that you are hovering over an icon. There may be several of these. Use tooltip to figure out which is Ouput and click it.
Worked for me, I hope it works for you too.
click the button on the left of Debug View called "restore layout",then the console will go back in the Debug View! 1
Syed explained it pretty well, but a picture could be even better:
A view can be hidden via its context menu, then restored by clicking the corresponding icon (with red circle) to the right.
You can restore the layout using this button as of 2018.1.8
In 2016.2, I had to re-run in debug mode for it to reappear. I could not find a way to un-hide the console in the debug window.
You don't say which version of IntelliJ you're using, but I've just tried this in version 12 and the console window minimises to the far right of the debugger tabs. Look at where it says 'Debugger' and then eyes right until you see one or more icons over the Watches panel. Try clicking on them. If you're not using version 12, then only god can help you :)
In v. 2020.1 there is Layout Settings on the top right corner of Debug window
I've just spent an hour trying to get my console output back, and although this answer didn't solve it, it did help.
I'm on Intellij 11.1 Ultimate Edition, and Restore layout didn't help. Nor did I have any icons above the Watches window in the debugger, but I clicked around above the Watches anyway - and suddenly my console output was restored.
I've tried clicking around there again to see if I can provide more concrete steps, but without success. Can only suggest you keep clicking till it reappears.

IntelliJ IDEA back/forward with mouse

I want to move back/forward between editor tabs, using the two additional ("virtual") mouse buttons I have (RAZER DEATHADDER BLACK).
In Eclipse it's possible by default.
In IDEA I go to File->Settings->Keymap->Main menu->Window->Editor Tabs.
There I have Select Next Tab with the deault Alt+Right shortcut.
Then I open the Add Mouse Shortcut.
In that dialog I try to assign the back button of my mouse but without success. It doesn't react at all.
Anyway, googling a bit I've found this thread. I quote Alexey Gopachenko which seems to be an employee of IntelliJ:
As stated above - we can't support buttons if JDK on your platform
does not support them - and obviously it does not.
Anyway, that is totally wrong. My platform does support these keys - I actually work with them, on the same platform, on Eclipse and any other app, so it's IDEA who ignores them.
I'd appriciate a solution - how do I assign these back/forward mouse buttons?
UPDATE #1
I've found out that IDEA uses its own JAVA distribution (C:\Program Files (x86)\JetBrains\IntelliJ IDEA 11.1.4\jre on Windows 7), instead of the system's one - WHY?!
I'm almost SURE that is the reason I cannot use extended mouse buttons.
I've tried to trick IDEA by creating a custom Windows shortcut. Didn't work. I've also tried to create a SYMLINK in windows to my other, system-wide JRE distribution. Didn't work as well.
If someone come up with an idea on how to make it work with the system's JRE instead of its own - I think that'd solve the issue.
UPDATE #2
The above update #1 is not the issue.
I also had the same problem under OS X El Capitan. I just tried to add a new Keyboard-Shortcut and pressed than the Button 4 on the mouse and this worked.
Back/Forward mouse shortcuts work fine for me with Razer Mamba mouse, for example Back action is assigned to Button4 Click and I can confirm that it is recognized in this dialog when I click on the Click Pad area:
If it doesn't work with your mouse for some reason, you can try to workaround the problem using the Razer Configurator macro or key assignments:
Use the assigned key in IDEA keymap settings instead of the mouse shortcut.
Note that Eclipse is SWT based while IDEA is Swing based, so mouse event management is completely different. If JDK cannot recognize your device button clicks, it will not work in any Java Swing applications (NetBeans, JEdit, etc). In some cases running IDEA under a more recent JDK version may help (if support for your device was added in the newer JDK release).
I'm experiencing the exact same thing suddenly.
I realized my most recent change was to start using idea64.exe rather than idea.exe.
I switched back, and my mouse buttons are working fine again.
So, while this is not a complete answer, it seems as if it has something to do with the 64-bit version.
If the Razer driver's button mapping feature doesn't allow different mappings for a particular program, you can just assign the buttons to the mouse button number choices (mouse button 4 / mouse button 5) and then install a third party app that does support mappings for particular programs, e.g. https://superuser.com/questions/562972/how-to-map-bind-mouse-button-as-keyboard-button-in-windows-7
This question helped me although I have a Logitech Marathon Mouse M705, so I thought that I would share the solution in case other Logitech owners was in search for this.
I have a similar problem with a Logitech mouse and idea64.exe
Fortunately their SetPoint software allows for program specific settings.
This setting will have to be deleted and then reconfigured whenever you update IntelliJ and get a new idea64.exe :-)
I am experiencing a very similar problem and wanted to share my findings. I just bought a new Logitech M705 mouse. Within intelli-j the scroll right and scroll left buttons do not work. The forward and backward buttons also do not work.
I typically run intelli-j as administrator because I need higher privileges to run various tomcat services. When logging in as that user (rather than right clicking and selecting run as admin) all the buttons work! Also, when running as my normal user all the buttons work.
Also very curious is that I have an older generation Logitech mouse (same model, M705). This mouse has no problems with the scroll buttons and forward-back.
My solution for now is to use intelli-j as the user I am logged in as.
Check out this little tutorial from BetterTouchTool here. Basically for some mice (like Logitech ones) using the settings application they come with you can map default button actions to clicks and in doing so set a button number and use it as normal.
This works for my Logitech Performance MX mouse.
You can add mouse shortcuts, just click on an action in keymap and add mouse shortcut.
Alternatively Ctrl+Tab brings up switcher, which may be less clicks to navigate.