I am trying to make a PTSN call via Voximplant platform and i keep getting error with code 480, "Destination number is unavailable". Why am i keep getting it?
This error means that the destination number is not available. The reason can also be some provider restrictions.
Related
My application creates thousands of "load jobs" daily to load data from Google Cloud Storage URIs to BigQuery and only a few cases causing the error:
"Finished with errors. Detail: An internal error occurred and the request could not be completed. This is usually caused by a transient issue. Retrying the job with back-off as described in the BigQuery SLA should solve the problem: https://cloud.google.com/bigquery/sla. If the error continues to occur please contact support at https://cloud.google.com/support. Error: 7916072"
The application is written on Python and uses libraries:
google-cloud-storage==1.42.0
google-cloud-bigquery==2.24.1
google-api-python-client==2.37.0
Load job is done by calling
load_job = self._client.load_table_from_uri(
source_uris=source_uri,
destination=destination,
job_config=job_config,
)
this method has a default param:
retry: retries.Retry = DEFAULT_RETRY,
so the job should automatically retry on such errors.
Id of specific job that finished with error:
"load_job_id": "6005ab89-9edf-4767-aaf1-6383af5e04b6"
"load_job_location": "US"
after getting the error the application recreates the job, but it doesn't help.
Subsequent failed job ids:
5f43a466-14aa-48cc-a103-0cfb4e0188a2
43dc3943-4caa-4352-aa40-190a2f97d48d
43084fcd-9642-4516-8718-29b844e226b1
f25ba358-7b9d-455b-b5e5-9a498ab204f7
...
As mentioned in the error message, Wait according to the back-off requirements described in the BigQuery Service Level Agreement, then try the operation again.
If the error continues to occur, if you have a support plan please create a new GCP support case. Otherwise, you can open a new issue on the issue tracker describing your issue. You can also try to reduce the frequency of this error by using Reservations.
For more information about the error messages you can refer to this document.
We are trying to replicate data from AlloyDB to Bigquery using Datastream.
We Get "An unknown error occurred. Please try again. If the error persists, contact Google support."
In the Datastream console --> objects list, we see all source tables with Object Status "Failed" and Backfill status "Completed".
In Bigquery we see only a subset of the tables (not all the "Completed" objects were synced).
In the Logs Explorer I can see this error on BQ:
I also see this error: error: {
code: 11
message: "Unsupported primary key column either does not exist or is a pseudocolumn at [1:401]"
}
The column referred in the error is of type enum.
The desired situation is having all the AlloyDB tables replicated into Bigquery.
The error message is not very informative...
What does it mean?
What would be the best way to go about troubleshooting this?
We're actively working on making these error messages be more informative, and improvements are continuously being rolled out as we identify more edge cases. Assuming you followed all the steps in the documentation, then you may need to open a ticket with support for further investigation. If a support ticket isn't an option, you can still report the issue using the public issue tracker
I just had this same issue but connecting to a PostgreSQL in AWS RDS:
Beginning with Postgres 10, passwords are encrypted using SCRAM-SHA-256 in PostgreSQL. Google DataStream still expects MD5 password encryption, or it will generate an "unknown error" in the logs and fail the backfills.
You'll need to update your postgresql.conf (or RDS Cluster Parameter Group if you're using AWS like me):
password_encryption = 'MD5'
Restart the database and make sure the parameter has changed with:
SHOW password_encryption;
Reset the password of your users:
ALTER USER "{username}" with password '{password}';
More info from the PostgreSQL docs: https://www.postgresql.org/docs/current/auth-password.html
More info from stms :
Short Text
SQL error "SQL code: -10108" occurred while accessing table "CDHDR".
What happened?
Database error text: "SQL message: Session has been reconnected."
Return value of the database layer: "SQL dbsl rc: 99"
The problem is that client is running this code through the job in which I am not available to debug it. All I know is that it is working for other countries selected but for some specific it is not so the question is :
Was it a temporary connection error between two servers or is it data overload issue due to SELECT statement?
At the moment I am not really sure which thing I have to look on the system, the same program once produced the error for exceeding the limit in the db query ( > 10 minutes) so this might be related to system configuration or what?
Thanks in advance
I have an API in WSO2. When I try to test it in the store with valid parameters via GET, it returns the following error message:
<am:fault xmlns:am="http://wso2.org/apimanager">
<am:code>101504</am:code>
<am:type>Status report</am:type>
<am:message>Runtime Error</am:message>
<am:description>Send timeout</am:description>
</am:fault>
I have already searched and tried a lot, but with no success, always returning the same error. Don't know if helps, but the api that I try to access is a PHP file.
Any ideas?
EDIT:
I have identical apis to this one, changing only the response, that are working properly. Even if I erase the php file that the API is pointing, the error keep coming.
EDIT:
I changed the code in Management Console, in Metadata>List>APIs:
{"production_endpoints":
{"url":"http://site/myapi.php","config":
{"format":"leave-as-is","optimize":"leave-as-
is","actionSelect":"fault","actionDuration":30000}},
"sandbox_endpoints":
{"url":"http://site/myapi.php","config":
{"format":"leave-as-is","optimize":"leave-as-
is","actionSelect":"fault","actionDuration":30000}},
"implementation_status":"managed","endpoint_type":"http"}
to this:
{"production_endpoints":
{"url":"http://10.20.40.189/ConsultaAutorizacaoCadPos.php","config":null},
"sandbox_endpoints":{"url":"http://10.20.40.189/ConsultaAutorizacaoCadPos.php","config":null},
"implementation_status":"managed","endpoint_type":"http"}
And this error message vanishes. But this new one appears:
<am:fault xmlns:am="http://wso2.org/apimanager">
<am:code>303001</am:code>
<am:type>Status report</am:type>
<am:message>Runtime Error</am:message>
<am:description>Currently , Address endpoint : [ Name : admin--myapi_APIproductionEndpoint_0 ] [ State : SUSPENDED ]</am:description>
EDIT: this error message is appearing just sometimes. Most of the time the request takes long time to run and then returns nothing( no content )
Any ideas how to solve it?
One of my primary SSIS import packages has been showing the following error the last few times it's been run. The data loads exactly how it should, just with this one error which doesn't seem to make a real difference. I would like to get it cleared up though.
Here is the error:
Error 1 Error loading Update.dtsx: The connection type "OLEDB" specified for connection manager "SQL.Staging" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name. D:\SSIS Projects\Update.dtsx 1 1
Error 2 Error loading Update.dtsx: Error loading value " 0 SQL.Staging {925404E7-27AA-4C4E-337B-D6058341" from node "DTS:ConnectionManager". D:\SSIS Projects\Update.dtsx 1 1
Error 3 Error loading 'Update.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. . D:\SSIS Projects\Update.dtsx 1 1
As I said, the package runs fine. It doesn't seem to have any issues with the OLEDB source or destination's, which is what the error seems to indicate. Any other recommendations? Thanks!