So I created a new ASA (AKA: Algorand Standard Asset) and set the total amount of that asset to be maximum.
Here's a quick snippet of how I did it:
const UINT64_MAX: bigint = BigInt('18446744073709551615');
Now, When I check how many tokens asset creator has with Algorand's Daemon API
curl http://localhost:8980/v2/accounts/3IELQKOD...3C5IB3BP4V4A/assets
I get it exactly right as: 18446744073709551615
But when i check it with the indexer in the sdk its something different.
It shows total assets as "18446744073709552000" to be exact which is not true.
What am i doing wrong here or this is error in library?
you need to set your client to support big int or mixed.
as JS Only supports 2^^53
You can easily set it by setting IntDecoding method for all JSON requests created by client here.
Related
I'm new to Akeneo, and I discovered profile configuration for assets.
So I imported my YML in order to add asset transformations, and now, cli based, I can't find a command that allows me to generate the variation file for all assets. I saw the command to do that asset by asset and channel by channel, but I need to do that for all of them.
Do you know how I can manage to do that ? I already tried pim:asset:generate-missing-variation-files but that didn't change anything
There is no built-in command to do that, however you could develop a very simple command to achieve this.
You can use the pimee_product_asset.finder.asset service to call retrieveVariationsNotGenerated() in order to retrieve every variation that are not yet genreated, then finally use the pimee_product_asset.variation_file_generator to generate the variation with generate().
Not tested code, but this would be like that:
$finder = $this->get('pimee_product_asset.finder.asset');
$generator = $this->get('pimee_product_asset.variation_file_generator');
$variations = $finder->retrieveVariationsNotGenerated();
foreach ($variations as $variation) {
$generator->generate($variation);
}
I am new to S3 and need to use it for image storage. I found a half dozen versions of an s2wrapper for cf but it appears that the only one set of for v4 is one modified by Leigh
https://gist.github.com/Leigh-/26993ed79c956c9309a9dfe40f1fce29
Dropped in the com directory and created a "test" page that contains the following code:
s3 = createObject('component','com.S3Wrapper').init(application.s3.AccessKeyId,application.s3.SecretAccessKey);
but got the following error :
So I changed the line 37 from
variables.Sv4Util = createObject('component', 'Sv4').init(arguments.S3AccessKey, arguments.S3SecretAccessKey);
to
variables.Sv4Util = createObject('component', 'Sv4Util').init(arguments.S3AccessKey, arguments.S3SecretAccessKey);
Now I am getting:
I feel like going through Leigh code and start changing things is a bad idea since I have lurked here for year an know Leigh's code is solid.
Does any know if there are any examples on how to use this anywhere? If not what I am doing wrong. If it makes a difference I am using Lucee 5 and not Adobe's CF engine.
UPDATE :
I followed Leigh's directions and the error is now gone. I am addedsome more code to my test page which now looks like this :
<cfscript>
s3 = createObject('component','com.S3v4').init(application.s3.AccessKeyId,application.s3.SecretAccessKey);
bucket = "imgbkt.domain.com";
obj = "fake.ping";
region = "s3-us-west-1"
test = s3.getObject(bucket,obj,region);
writeDump(test);
test2 = s3.getObjectLink(bucket,obj,region);
writeDump(test2);
writeDump(s3);
</cfscript>
Regardless of what I put in for bucket, obj or region I get :
JIC I did go to AWS and get new keys:
Leigh if you are still around or anyone how has used one of the s3Wrappers any suggestions or guidance?
UPDATE #2:
Even after Alex's help I am not able to get this to work. The Link I receive from getObjectLink is not valid and getObject never does download an object. I thought I would try the putObject method
test3 = s3.putObject(bucketName=bucket,regionName=region,keyName="favicon.ico");
writeDump(test3);
to see if there is any additional information, I received this :
I did find this article https://shlomoswidler.com/2009/08/amazon-s3-gotcha-using-virtual-host.html but it is pretty old and since S3 specifically suggests using dots in bucketnames I don't that it is relevant any longer. There is obviously something I am doing wrong but I have spent hours trying to resolve this and I can't seem to figure out what it might be.
I will give you a rundown of what the code does:
getObjectLink returns a HTTP URL for the file fake.ping that is found looking in the bucket imgbkt.domain.com of region s3-us-west-1. This link is temporary and expires after 60 seconds by default.
getObject invokes getObjectLink and immediately requests the URL using HTTP GET. The response is then saved to the directory of the S3v4.cfc with the filename fake.ping by default. Finally the function returns the full path of the downloaded file: E:\wwwDevRoot\taa\fake.ping
To save the file in a different location, you would invoke:
downloadPath = 'E:\';
test = s3.getObject(bucket,obj,region,downloadPath);
writeDump(test);
The HTTP request is synchronous, meaning the file will be downloaded completely when the functions returns the filepath.
If you want to access the actual content of the file, you can do this:
test = s3.getObject(bucket,obj,region);
contentAsString = fileRead(test); // returns the file content as string
// or
contentAsBinary = fileReadBinary(test); // returns the content as binary (byte array)
writeDump(contentAsString);
writeDump(contentAsBinary);
(You might want to stream the content if the file is large since fileRead/fileReadBinary reads the whole file into buffer. Use fileOpen to stream the content.
Does that help you?
I have a GSM/GPS unit connected to a Microcontroller, the communication between them works fine. I am able to get the GPS and send it to the Microcontroller but there are times when the unit is inside the building so I can't really get the current GPS location, instead I want to get the tower location.
The AT command I'm using to get the LAC and CI with response is as follows.
Command: AT+CREG=2
Response:
From this, LAC = 2BCB or 11211 and CI = 2B9A or 11162
The sim card I'm using is registered under T-Mobile, so the MCC = 310 and MNC = 260 by looking them up here. However when I plug those values on this website, I don't get the location.
What am I missing ?
I noticed when I try to check the current network with AT+COPS? I don't get the same results as shown here.
Am I suppose to manually set the network information ? If yes please someone provide me with the correct format. I tried sending At+COPS=4,2,”310 260″ but that threw me an error.
Here is the AT command document I am following, it has a different format. Thanks!
I figured it out, I just had to plug in the values in this website instead of the original website I was using.
I'm working with Adwords API, I already can download reports like: all keywords with impressions, clics, ctr, conversions, etc...
The problem is, I need to show this report on our web tool when the user set the date range.
Now I'm doing this: The user selects Start Date 01/09/2014 End Date 15/09/2014, I call Adwords Api, download CSV, parsing it, and then show the results on the screen, but this way is not optimal and I would like to know how to call the API and get the results "at the moment", getting an XML or JSON without download a file.
Is it possible??
The only way I found was calling CampaignService class.. getting all campaigns, then for each campaign calling AdgroupService for get all Adgroups, then keywords.... It's really impractical.
How can I do it?
Thank you very much.
It appears in recent versions of the libary they created a function (getAsString()) so we can achieve this:
$reportDownloader = new ReportDownloader($session);
$reportDownloadResult = $reportDownloader->downloadReport($reportDefinition);
//Normal way of downloading to file
//$reportDownloadResult->saveToFile($filePath);
//printf("Report with name '%s' was downloaded to '%s'.\n",
// $reportDefinition->getReportName(), $filePath);
//New way by calling getAsString();
$reportAsString = $reportDownloadResult->getAsString();
echo $reportAsString;
Old suggestions about passing null as the $filePath no longer work.
Yes, you can get XML without downloading file. Just set $path to Null when calling ReportUtils::DownloadReport() and it returns you response without saving it to file.
The AdWords API library (as of v201506) allows you to set the download_format to one of CSVFOREXCEL, CSV, TSV, XML, GZIPPED_CSV, or GZIPPED_XML. It unfortunately does not support JSON, even if you ask to download the report data (not as a file).
$reportAsString = $reportDownloadResult->getAsString();
$xml = simplexml_load_string($reportAsString);
I wrote an application using JClouds 1.6.2 and had file upload code like
java.io.File file = ...
blobStore.putBlob(containerName,
blobStore.blobBuilder(name)
.payload(file)
.calculateMD5()
.build()
);
This worked perfectly well.
Now, in jclouds 1.7, BlobStore.calculateMD5() is deprecated. Furthermore, even if calculating the MD5 hash manually (using guava Hashing) and passing it with BlobStore.contentMD5(), I get the following error:
java.lang.IllegalArgumentException: contentLength must be set, streaming not supported
So obviously, I also have to set the content length.
What is the easiest way to calculate the correct content length?
Actually I don't think, jclouds suddenly removed support of features and makes uploading files much more difficult. Is there a way to let jclouds calculate MD5 and/or content length?
You should work with ByteSource which offers several helper methods:
ByteSource byteSource = Files.asByteSource(new File(...));
Blob blob = blobStore.blobBuilder(name)
.payload(byteSource)
.contentLength(byteSource.size())
.contentMD5(byteSource.hash(Hashing.md5()).asBytes())
.build();
blobStore.putBlob(containerName, blob);
jclouds made these changes to remove functionality duplicated by Guava and make some of the costs of some operations, e.g., hashing, more obvious.