enter image description here
I tried to use C/S port to get NvmJobFinishedNotify by NVM(from BSW) through RTE and NvBlock SWC
I created C/S ports between SWC and NvBlock Swc and linked them together, but I found no RTE_CALL_BACK generated in Nvm module.
I tried several times by different method. but not success.
Could you give me some reference documents or user guides about How to create C/S port between SWC and NvBlockSWC
Thank you
BR
Lin, Jian
Related
I have a device running TwinCAT/BSD.
Following section 5 the manual for TwinCAT/BSD I have successfully managed to install the TF6250 package. After updating the firewall rules I have confirmed that I am able connect and issue modbus tcp requests successfully using the Default Configuration from section 4.3 of the TF6250 manual.
My project requires mapping that is different from the default (i.e to the %Q registers rather than %M). Normally (when not not using TwinCAT/BSD) I would be able to edit my mapping via the Modbus TCP Configurator, but there does not appear to be an equivalent tool contained in the package for TwinCAT/BSD.
I have tried copying the mapping files that I would have created in the configurator into the Server directory with no luck. Are you able to tell me how my mapping can be updated in the TwinCAT/BSD environment?
If relevant:
TwinCAT Build: 3.1.4024.19
TC/BSD: 12.2.9.1,2
TF6250-Modbus-TCP: 2.0.1.0_1
pkg repo: https://tcbsd.beckhoff.com/TCBSD/12/stable/packages
I spoke with Beckhoff support who told that TF6250 expects the xml file with the configuration here: /usr/local/etc/TwinCAT/Functions/TF6250-Modbus-TCP/TcModbusSrv.xml
I tested this and it appears to work so all you need to do;
Create the mapping file as per normal (e.g using the windows tool) and copy the file there.
Reboot the device to load the configuration from the file.
I am currently using 'connmanctl config' to set static and DHCP settings with a wired connection. I'm curious if anyone has been successful with applying settings with the wire unplugged?
I would typically use 'connmanctl services' for a list of services then perform a string.match(blah, "ethernet_%w+_cable") to use that wired service name. I have been able to find and apply that service name with the ethernet cable unplugged BUT now when using 'connmanctl config':
connmanctl config ethernet_f8dc7a04ea82_cable --ipv4 manual 192.168.91.108 255.255.255.0 192.168.91.1 --nameservers 8.8.8.8
I get this error:
Error ethernet_f8dc7a04ea82_cable: Method "SetProperty" with signature "sv" on interface "net.connman.Service" doesn't exist
As you can see I have the service applied to the command and this is the same service name as when the cable is plugged in. This feature would be nice for equipment that needs to be pre-programmed before reaching the customer. I have also researched this error but can't find it being an issue with others the same as it is with my situation. Have also read many blogs, articles, etc...on trying to achieve this with nothing that jumps out at me.
...Any ideas ?
I had to perform this action via back-end with the code that I am using to configure. Just an example...settings are applied to /var/lib/connman/ethernet_?????cable/settings. I created the adapter name with the MAC address because it does not exist until the network is detected, created the directory /ethernet?????_cable then created an empty settings file on the fly. When programming and saving the settings via the equipment I am using I just insert the settings manually. When a network cable is plugged in and detected the settings you have applied work wonderfully.
From rabbitmq documents I know there is an new_ssl application.
I have installed erlang through macport command. after using command "port content erlang|grep new_ssl", I can't find it.
In www.erlang.org, new_ssl document, it says new_ssl is an module not an application.
But reading ssl.app, it also doesn't contain new_ssl module?
Is it a ghost?
new vs old ssl are two different implementations of SSL. Old ssl used libopenssl directly where as new ssl is build in erlang with only libcryto functions in C. As of the R15B release (dec 2011) of Erlang/OTP, the old_ssl implementation was entirerly dropped.
I have tried for days now trying to find the right version of red5phone, but to no avail. Also, I need red5 and asterisk to be on different servers. I have followed all instructions described in the various tutorials on web, but nothing helps. I have downloaded 2 different versions of red5phone: sip1, sip_47 from the red5phone google code site, but none of them worked!
When I use:
a) sip1 - shows the correct parameters being passed on the red5 server console, but connection is stuck up with the console displaying the following error:
[NioProcessor-1] ERROR o.r.server.service.ServiceInvoker - Method login with parameters [<sip user>, <sip user>,<sip user>,<sip user pwd>, <asterisk server i/p>, <asterisk server i/p>] not found in org.red5.server.webapp.sip.Application#2d0c94a7
b) sip47 - when I type in the values in the flex interface and check the red5 server console, I see all parameters correct(the ones I passed) except for asterisk server ip that i m trying to connect. Instead, it shows 127.0.0.1 by default and completely ignores the passed ip and regsitration fails.
I am using:
red5 server version: 0.9.1, centos: 4.8(final), red5phone used: sip_47 (tried sip1 as well)
As a desperate measure I tried debugging the source code for red5phone (java and flex files) myself. but when I try to create the environment on my local system, I get several compile errors for missing java packages such as javax.media, org.slf4j, org.red5, etc. really confused and desperate for some guidance. Any tips highly appreciated.
Sunil, I'm also new to this, I would try red5-voicebridge installed in your red5 server.
red5-voicebridge Please let me know if you got it to work.
im just starting to learn flex and im trying to understand how Flex does remoting? From what i have read it looks like Flex provides a LifeCycle data services war which sits on your server and intercepts your remote calls , is this close?
Im concerned that if i use this option that 1. Ill have to add an extra war to my server - the lifecycle data service war and 2. That i will have to pay for a license for each instance i use on each cpu.
Is there an easier [free] option out there which i can use to call my remote java objects from within my flex mxml?
Blaze DS is based off the same APIs / code base as LiveCycle Data Services and is completely free and open source:
http://opensource.adobe.com/wiki/display/blazeds/BlazeDS/
There are a number of other options available including:
Granite DS
WebOrb
FluorineFX (for .NET)
There are also solutions for PHP, Python and Ruby, although I can't recall their names right now.
Easiest option is to send xml from the server and to use it in Flex.
However if you want to use java Objects you can go for BlazeDs. It would require you to put an extra jar files (an no incensing) Also there are other options available as WebOrb for java nr meraapi.