I have tried for days now trying to find the right version of red5phone, but to no avail. Also, I need red5 and asterisk to be on different servers. I have followed all instructions described in the various tutorials on web, but nothing helps. I have downloaded 2 different versions of red5phone: sip1, sip_47 from the red5phone google code site, but none of them worked!
When I use:
a) sip1 - shows the correct parameters being passed on the red5 server console, but connection is stuck up with the console displaying the following error:
[NioProcessor-1] ERROR o.r.server.service.ServiceInvoker - Method login with parameters [<sip user>, <sip user>,<sip user>,<sip user pwd>, <asterisk server i/p>, <asterisk server i/p>] not found in org.red5.server.webapp.sip.Application#2d0c94a7
b) sip47 - when I type in the values in the flex interface and check the red5 server console, I see all parameters correct(the ones I passed) except for asterisk server ip that i m trying to connect. Instead, it shows 127.0.0.1 by default and completely ignores the passed ip and regsitration fails.
I am using:
red5 server version: 0.9.1, centos: 4.8(final), red5phone used: sip_47 (tried sip1 as well)
As a desperate measure I tried debugging the source code for red5phone (java and flex files) myself. but when I try to create the environment on my local system, I get several compile errors for missing java packages such as javax.media, org.slf4j, org.red5, etc. really confused and desperate for some guidance. Any tips highly appreciated.
Sunil, I'm also new to this, I would try red5-voicebridge installed in your red5 server.
red5-voicebridge Please let me know if you got it to work.
Related
Firstly, there are related posts:
GlassFish Server update center installation times out
Java EE 7 updatetool installation fails
I got my Java EE 7 SDK (Update 3) from here: http://www.oracle.com/technetwork/java/javaee/downloads/index.html
I have tried each of the solutions in the above posts and here: https://blogs.oracle.com/dipol/troubleshooting-glassfish-update-center
Including:
In the cmd prompt running set PKG_CLIENT_CONNECT_TIMEOUT=300 and set PKG_CLIENT_READ_TIMEOUT=300 before updatetool in C:\glassfish4\bin\updatetool.bat (c:\glassfish4 in my install directory - all settings were default, including install update tool...).
Set above mentioned timeout to much larger values - doesn't appear to make a difference at all, the process basically bombs immediately.
Running C:\glassfish4\bin\updatetool.bat many times.
Triple checking that I didn't somehow configure a proxy server in my sleep.
Use the update tool via the Glassfish admin console at http://localhost:4848 (seems to show no available update or add-ons, which seems odd..)
I get the following screenshot when I run C:\glassfish4\bin\updatetool.bat
I have no idea why the error would be proxy related, unless it happened to be something on their end. Interestingly, If I go directly to the URL mentioned (via Chrome) I get the following page:
What could possibly be going wrong here?
The updatetool was a commercial feature of Oracle GlassFish. Any update functionality relied on Oracle providing a site where updates could be hosted. Since Oracle GlassFish is no longer supported, this site no longer exists so the updatetool won't work any more.
Rather than downloading GlassFish from Oracle, you should download it from the official open source site, hosted on GitHub. Alternatively, if you really do need support, you could try Payara Server which is open source, and derived from GlassFish, but has support available (disclaimer: I work for Payara)
I'm struggling to get the connected mode to connect to my local instance of SonarQube.
I'm suspecting it has something to do with the way my system is set up.
I'm using a Mac (OS X 10.11.x) and I have PHP and Apache set up according to this tutorial. I think perhaps there is an issue with a firewall rule or something.
When I connect to http://localhost:9000/api/system/status with a browser, there is no problem. telnet localhost 9000 works fine too.
But when I enter credentials and create a configuration in SonarLint, I always get:
error testing connection: Fail to request http://localhost:9000/api/system/status
Anybody have a clue?
It is also worth to check SonarLint issue tracker. Issue looks related rather to the plugin than PhpStorm itself.
Check your Phpstorm log folder ~/Library/Logs/PhpStormVERSION/FILE.log (FILE - some log file for phpstorm, in Intellij it's idea.log)
I see the tutorial you followed enabled SSL and I guess that should be because of a certificate.
Our ServiceNOW instance recently got upgraded from Eureka to Geneva.
MID Server status became down and the version does not match the Build number in the stats.
I was told that the MID Server will auto upgrade which didn't happened. I am using a proxy server to connect, when I tried communicating with the instance through the server it is working however I assume the service or application installed is not able to communicate with the instance.
I created a new service and it worked perfectly for 1 min however after that the status of it became down.
Then I tried changing the configurations of old services however no good.
Now the services are running fine however in the config file in the mid_sys_id section mid server details not getting populated and the status of the MID Server in the instance is always down.
Do I need to change any properties in the instance?
Since I use proxy server do I need to remove the comment line of the auto upgrade through proxy section or can I leave that blank?
What is the issue here? Why my MID Server is not getting upgraded? Kindly help me.. If possible an explanation with screen shot would be much appreciated.
If you're on Geneva, you should be able to simply go to your MIDServer listing, from inside your instance, click on a MIDServer, and find 'Upgrade MID' in the Related links section. That should start an upgrade for that MID Server. If it fails, there should be an entry in either the ServiceNow logs or the MID Server logs with more information why it failed.
I have dowloaded latest version of genymotion with proxy server 2.2.2 and while connecting i am getting invalid reply from server (do you use a proxy?). I am not using proxy for sure. Any ideas?
Answer, its all about the http proxy server on the genymotion settings just UNCHECK on the genymotion setting or remover the http proxy server by UN-ticking the ability to enter HTTP PROXY and PORT let it be blank by unckecking hence login your credentials, if it doesn't work try confirming you email with genymotion.
In my case I went to Settings > Network > I checked "Use HTTP Proxy" and I filled the Http Proxy and port fields (with company proxy valid values).
After that I connect smoothly as silk.
I had the same problem in ubuntu and after some struggle when i was almost giving up i stop the docker (had one instance running in port 3337 in my PC) and for my surprise it's finally work.
I had a similar issue (invalid reply from server without Proxy, on a highly customized and quite broken ubuntu 16.04). nothing of the above helped. (seemingly)
Then I visited this site:
http://qaru.site/questions/835901/genymotion-stuck-on-splash-screen
(well, you have to let google translate it, if you are not russian)
the error described there is completely different. (computer crash resulting in different networking issues)
but it had one thing in common with my case:
everything worked fine, and then suddenly: SOME NETWORKING ERROR - without reason
well, for me, the solution was the same as described on the russian page:
removing a (corrupted?!) conf file.
the conf file was at (my home folder)/.config/Genymobile/Genymotion.conf
i deleted it (i had to do it with root, because the file was owned by root, but this might have been the case because i messed a bit with genymotion...)
Then, i restarted genymotion and logged in again and it worked like a charm.
I had to allow Genymtion.exe in windows firewall. I'm using v3
Had the same problem, managed it using a VPN.
I have done with red5 server installation.everything works fine in server installation..all the demo red5 applications are working perfectly. but I'm getting problem with red5-recorder..I'm getting an ERROR:could not connect to the server rtmp://127.0.0.1 ..Is there any other modification I have to do in the code?
ERROR:could not connect to the server rtmp://127.0.0.1 is caused by
if(Application.application.parameters.server!=null) myRecorder.server= Application.application.parameters.server;
which defaults to nc.connect(myRecorder.server) which returns 127.0.0.1/red5recorder
In order to get around this, you can pass along the server= FlashVar.
Edit red5recorder.html and add this in the appropriate place (after line #91):
"FlashVars", "server=rtmp://your.external.server.ip/red5recorder"
This is because the swf is downloaded and run client side, and needs to connect to your server's RTMP service. It can't connect to 127.0.0.1/red5recorder because that's your PC. This is why you set the server= paramerter. :-)
I hope that helps.
I created a new web app for Red5Recorder as indicates here with the name "red5recorder" because that's the name the recorder use to comunicate with. (see the Recorder.as file in the sources) and after restarted the server it started to work. The output file called "video.flv" is in the streams/ subdirectory.
I hope this helps you.
Cristian