What is the best way to load a window so that there is less load in multiprocessing.
I tried to run 5 thousand threads in embed (1 thread = 1 window) on such a configuration,
but the load is always under 100%
ConfIg
handels
Related
We are currently using ExoPlayer for one of our applications, which is very similar to the HQ Trivia app, and we use HLS as the streaming protocol.
Due to the nature of the game, we are trying to keep all the viewers of this stream to have the same latency, basically to keep them in sync.
We noticed that with the current backend configuration the latency is somewhere between 6 and 10 seconds. Based on this fact, we assumed that it would be safe to “force” the player to play at a bigger delay (15 seconds, further off the live edge), this way achieving the same (constant) delay across all the devices.
We’re using EXT-X-PROGRAM-DATE-TIME tag to get the server time of the currently playing content and we also have a master clock with the current time (NTP). We’re constantly comparing the 2 clocks to check the current latency. We’re pausing the player until it reaches the desired delay, then we’re resuming the playback.
The problem with this solution is that the latency might get worse (accumulating delay) over time and we don’t have other choice than restarting the playback and redo the steps described above if the delay gets too big (steps over a specified threshold). Before restarting the player we’re also trying to slightly increase the playback speed until it reaches the specified delay.
The exoPlayer instance is setup with a DefaultLoadControl, DefaultRenderersFactory, DefaultTrackSelector and the media source uses a DefaultDataSourceFactory.
The server-side configuration is as follows:
cupertinoChunkDurationTarget: 2000 (default: 10000)
cupertinoMaxChunkCount: 31 (default: 10)
cupertinoPlaylistChunkCount: 15 (default: 3)
My first question would be if this is even achievable with a protocol like HLS? Why is the player drifting away accumulating more and more delay?
Is there a better setup for the exoPlayer instance considering our specific use case?
Is there a better way to achieve a constant playback delay across all the playing devices? How important are the parameters on the server side in trying to achieve such a behaviour?
I would really appreciate any kind of help because I have reached a dead-end. :)
Thanks!
The only sollution for this is provided by:
https://netinsight.net/product/sye/
Their sollution includes frame accurate sync with no drift and stateful ABR. This probably can’t be done with http based protocols hence their sollution is built upon UDP transport.
I wonder what techniques would you use when, say a page contains links to 6 videos, 300Mb each and you want to download them all. Should I write my custom downloader?
I'm used to use MediaPipeline but it utilizes the framework scheduler which has the following issues:
You never know which file is currently being downloaded
You have no idea on download progress/state until it fails
Strange timeout behaviour:
a) Looks like timeout is applied to the whole request download operation, not only to pauses in download. So, say, having a timeout of 5min I will never be able to download a file which takes 6 min to download. b) If you make 5 concurrent long requests and one of them is taking too long, you will get all of them (not complete yet) timed out. You have to limit the number of concurrent requests by 1 in settings (which will affect the whole spider).
You can make use of Youtube downloader after having retrieve links to the videos.
Youtube downloader will try to continue if video has not finished downloading. You can also force it to continue. Write a wrapper around it for concurrency if it takes long for single downloads.
Disclaimer: I am not in anyway affiliated with the maintainers of this package.
I am using the UI Automation COM-to-.NET Adapter to read the contents of the target Google Chrome browser that plays a FLASH content on Windows 7. It works.
I succeeded to get the content and elements. Everything works fine for some time but after few hours the elements become inaccessible.
The (AutomationElement).FindAll() returns 0 children.
Is there any internal undocumented Timeout used by UIAutomation ?
According to this IUIAutomation2 interface
There are 2 timeouts but they are not accessible from IUIAutomation interface.
IUIAutomation2 is supported only on Windows 8 (desktop apps only).
So I believe there is some timeout.
I made a workaround that restarts the searching and monitoring of elements from the beginning of the desktop tree but the elements are still not available.
After some time (not sure how much) the elements are available again.
My requirements are to read the values all the time as fast as possible but this behavior makes a damage to the whole architecture.
I read somewhere that there is some timeout of 3 minutes but not sure.
if there is a timeout, is it possible to change it ?
Is it possible to restart something or release/dispose something ?
I can't find anything on MSDN.
Does anybody have any idea what is happening and how to resolve ?
Thanks for this nicely put question. I have a similar issue with a much different setup. I'm on Win7, using UIAutomationCore.dll directly from C# to test our application-under-development. After running my sequence of actions & event subscriptions and all the other things, I intermittently observe that the UIA interface stops working (about 8-10min in my case, but I'm heavily using the UIA interface).
Many different things including dispatching the COM interface, sleeping at different places failed. The funny revelation was I managed to use the AccEvent.exe (part of SDK like inspect.exe) during the test and saw that events also stopped flowing to AccEvent, too. So it wasn't my client's interface that stopped, but it was rather the COM-server (or whatever the UIAutomationCore does) that stopped responding.
As a solution (that seems to work most of the time - or improve the situation a lot), I decided I should give the application-under-test some breathing point, since using the UIA puts additional load on it. This could be a smartly-put sleep points in your client, but instead of sleeping a set time, I'm monitoring the processor load of the application and waiting until it settles down.
One of the intermittent errors I receive when the problem manifests itself is "... was unable to call any of the subscribers..", and my search resulted in an msdn page saying they have improved things on CUIAutomation8 interface, but as this is Windows8 specific, I didn't have the chance to try that yet.
I should also add that I also reduced the number of calls to UIA by incorporating more ui caching (FindAllBuildCache), as the less the frequency of back-and-forth the better it is for the uia. Thanks to the answer of Guy in another question: UI Automation events stop being received after a while monitoring an application and then restart after some time
we are facing a problem.
we have background requests that are downloading files constantly (up to 5MB each file). meanwhile, we have a UI that most navigations require REST calls.
we limited the number of background downloads so it won't suffocate the operationQueue that RESTkit uses.
when several files are downloaded in background, we see the network usage with 1->2 MB (which is understandable).
The problem is: the user navigates through the app, and each navigation calls a quick REST call that should return very little data. but because of the background downloads, the UI call is taking forever (~10 seconds).
Priority did not help, i saw that the UI call i make instantly is handled by the operation queue (because we limited the downloads limit and the NSOperationQueue had more space to fulfill other requests.
when we limited the concurrent REST download calls to 5 - the REST calls from the UI took 10 seconds.
when we limited the concurrent REST download calls to 2 - everything worked fine.
the issue here is that because we let only 2 downloads occur in the background - the whole background operation of downloading files will take forever.
the best scenario would be that every UI call would be considered as most important network-wise and even pause the background operations and let only the UI call to be handled - then resume the background operation - but i'm not sure it's possible.
any other idea to address this issue?
You could use 2 RKObjectManagers so that you have 2 separate queues, then use one for 'UI' and the other for 'background'. On top of that you can set the concurrent limits for each queue differently and you could suspend the background queue. Note that suspending the queue doesn't mean already running operations are paused, it just stops new operations from being started.
By doing this you can gain some control, but better options really are to limit the data flow, particularly when running on a mobile data network, and to inform the user what is happening so they can accept the situation or pause it till later.
I am a bit confused about the different options to handle file downloads on iOS.
I want to be able to handle > 2.000 downloads a time, so some kind of parallelism would be nice
I want a download to be started immediately when fired
I want a download not to be paused or stopped when sending the app to the background
The concrete scenario is a bunch of downloads which are made initially after the user logs into the application. Here I have to download that many files which are mainly small images.
Currently I am using NSURLSessionConfiguration's defaultSessionConfiguration, but going this way the downloads get paused when the user suspends the app (which is likely as the full process needs some minutes).
NSURLSessionConfiguration backgroundSessionConfiguration seems to be the better way to go, but I am seeing delays of up to 20-30 seconds before anything happens after initializing. That's propably okay for some scenarios, but not for mine.
So is there a way to get a workaround to that delay issue? Otherwise I will propably go the "old way" and just download the files in background threads on my own with the 10 minutes limitation.