I want to subtract two prices in SQL Server. Both prices are in the same table, for example list_id 5 - list_id6 I want to get results.
SELECT MIN(fiyat) - MAX(fiyat)
FROM table
WHERE liste_id in (5,6)
I want to subtract list_id 6 from list_id 5 here.
I understand that you want to substract the price of liste_id 5 from the price of liste_id 6.
One option uses two subqueries:
select
(select fiyat from mytable where list_id = 5)
- (select fiyat from mytable where list_id = 6) as res
You can also use conditional aggregation:
select max(case when liste_id = 5 then fiyat end) - max(case when liste_id = 6 then fiyat end)
from mytable
where liste_id in (5, 6)
Note that this assumes that liste_id is a unique key in the table, in other words there is at most one row for a given value.
SQL is concerned with set-operations, not arithmetic. So if you have two rows that you want to get a single scalar value from then use you should use separate T-SQL variables, like so:
DECLARE #fiyat_5 int = ( SELECT fiyat FROM [table] WHERE liste_id = 5 );
DECLARE #fiyat_6 int = ( SELECT fiyat FROM [table] WHERE liste_id = 6 );
IF #fiyat_5 IS NULL OR #fiyat_6 IS NULL
BEGIN
THROW 51000, 'Either value does not exist.', 1;
END;
SELECT ( #fiyat_5 - #fiyat_6 ) AS diff;
I have a table called tbl_A with the following schema:
After insert, I have the following data in tbl_A:
Now the question is how to write a query for the following scenario:
Put (1) in front of any employee who was present three days consecutively
Put (0) in front of employee who was not present three days consecutively
The output screen shoot:
I think we should use case statement, but I am not able to check three consecutive days from date. I hope I am helped in this
Thank you
select name, case when max(cons_days) >= 3 then 1 else 0 end as presence
from (
select name, count(*) as cons_days
from tbl_A, (values (0),(1),(2)) as a(dd)
group by name, adate + dd
)x
group by name
With a self-join on name and available = 'Y', we create an inner table with different combinations of dates for a given name and take a count of those entries in which the dates of the two instances of the table are less than 2 units apart i.e. for each value of a date adate, it will check for entries with its own value adate as well as adate + 1 and adate + 2. If all 3 entries are present, the count will be 3 and you will have a flag with value 1 for such names(this is done in the outer query). Try the below query:
SELECT Z.NAME,
CASE WHEN Z.CONSEQ_AVAIL >= 3 THEN 1 ELSE 0 END AS YOUR_FLAG
FROM
(
SELECT A.NAME,
SUM(CASE WHEN B.ADATE >= A.ADATE AND B.ADATE <= A.ADATE + 2 THEN 1 ELSE 0 END) AS CONSEQ_AVAIL
FROM
TABL_A A INNER JOIN TABL_A B
ON A.NAME = B.NAME AND A.AVAILABLE = 'Y' AND B.AVAILABLE = 'Y'
GROUP BY A.NAME
) Z;
Due to the complexity of the problem, I have not been able to test it out. If something is really wrong, please let me know and I will be happy to take down my answer.
--Below is My Approch
select Name,
Case WHen Max_Count>=3 Then 1 else 0 end as Presence
from
(
Select Name,MAx(Coun) as Max_Count
from
(
select Name, (count(*) over (partition by Name,Ref_Date)) as Coun from
(
select Name,adate + row_number() over (partition by Name order by Adate desc) as Ref_Date
from temp
where available='Y'
)
) group by Name
);
select name as employee , case when sum(diff) > =3 then 1 else 0 end as presence
from
(select id, name, Available,Adate, lead(Adate,1) over(order by name) as lead,
case when datediff(day, Adate,lead(Adate,1) over(order by name)) = 1 then 1 else 0 end as diff
from table_A
where Available = 'Y') A
group by name;
The following SQL (on SQL Server) returns an error of:
Incorrect syntax near '*'
Is there something inherently wrong with using the following SELECT statement?:
SELECT
COUNT(CASE WHEN <conditions> THEN * ELSE NULL END) as conditionalcountall
FROM TABLE
I tried this variation which also failed:
SELECT
CASE WHEN <conditions> THEN COUNT(*) ELSE NULL END as conditionalcountall
FROM TABLE
I tend to like sum()
SELECT
SUM(CASE WHEN <conditions> THEN 1 ELSE 0 END) as conditionalcountall
FROM TABLE
Try This, it is Tested
SELECT
CASE WHEN 1 = 1 THEN COUNT(*) ELSE NULL END as conditionalcountall
FROM TABLE
1 = 1is example conditions
Demo:-
Create table #temp (id int , col1 varchar (10))
go
insert into #temp values (1 , 'aaaa')
insert into #temp values (2 , 'bbbb')
insert into #temp values (3 , 'cccc')
SELECT
CASE WHEN 1 = 1 THEN COUNT(*) ELSE NULL END as conditionalcountall
FROM #temp
Result:
In Case Condation like that id = 1 you should select Count(*) in CASE cluse in your query
like this:
SELECT
CASE WHEN id = 1 THEN (select COUNT(*) from #temp) ELSE NULL END as conditionalcountall
FROM #temp
Result:-
Note: if You used Count(*) directly, you counted the id column, so you should use group by as next:
SELECT
CASE WHEN id = 1 THEN COUNT(*) ELSE NULL END as conditionalcountall
FROM #temp
group by id
Result:
SELECT
CASE WHEN X THEN Y
ELSE Z
END *NEW COLUMN NAME*
, COUNT(*)
FROM
TABLE
GROUP BY
*NEW COLUMN NAME*
This should return two columns, one with the buckets/case statement and one with the count of the columns for each one of your buckets
This method was the most straightforward for myself
If you REALLY, REALLY want to use COUNT, then you can do this:
SELECT
COUNT(*)
FROM table
WHERE <conditions>
I have table which list a number of cases and assigned primary and secondary technicians. What I am trying to accomplish is to aggregate the number of cases a technician has worked as a primary and secondary tech. Should look something like this...
Technician Primary Secondary
John 4 3
Stacy 3 1
Michael 5 3
The table that I am pulling that data from looks like this:
CaseID, PrimaryTech, SecondaryTech, DOS
In the past I have used something like this, but now my superiors are asking for the number of secondary cases as well...
SELECT PrimaryTech, COUNT(CaseID) as Total
GROUP BY PrimaryTech
I've done a bit of searching, but cant seem to find the answer to my problem.
Select Tech,
sum(case when IsPrimary = 1 then 1 else 0 end) as PrimaryCount,
sum(case when IsPrimary = 0 then 1 else 0 end) as SecondaryCount
from
(
SELECT SecondaryTech as Tech, 0 as IsPrimary
FROM your_table
union all
SELECT PrimaryTech as Tech, 1 as IsPrimary
FROM your_table
) x
GROUP BY Tech
You can group two subqueries together with a FULL JOIN as demonstrated in this SQLFiddle.
SELECT Technician = COALESCE(pri.Technician, sec.Technician)
, PrimaryTech
, SecondaryTech
FROM
(SELECT Technician = PrimaryTech
, PrimaryTech = COUNT(*)
FROM Cases
WHERE PrimaryTech IS NOT NULL
GROUP BY PrimaryTech) pri
FULL JOIN
(SELECT Technician = SecondaryTech
, SecondaryTech = COUNT(*)
FROM Cases
WHERE SecondaryTech IS NOT NULL
GROUP BY SecondaryTech) sec
ON pri.Technician = sec.Technician
ORDER By Technician;
SELECT COALESCE(A.NAME, B.NAME) AS NAME, CASE WHEN A.CASES IS NOT NULL THEN A.CASES ELSE 0 END AS PRIMARY_CASES,
CASE WHEN B.CASES IS NOT NULL THEN B.CASES ELSE 0 END AS SECONDARY_CASES
FROM
(
SELECT COUNT(*) AS CASES, PRIMARYTECH AS NAME FROM YOUR_TABLE
GROUP BY PRIMARYTECH
) AS A
FULL OUTER JOIN
(
SELECT COUNT(*) AS CASES, SECONDARYTECH AS NAME FROM YOUR_TABLE
GROUP BY SECONDARYTECH
) AS B
ON A.NAME = B.NAME
I have a table
create table us
(
a number
);
Now I have data like:
a
1
2
3
4
null
null
null
8
9
Now I need a single query to count null and not null values in column a
This works for Oracle and SQL Server (you might be able to get it to work on another RDBMS):
select sum(case when a is null then 1 else 0 end) count_nulls
, count(a) count_not_nulls
from us;
Or:
select count(*) - count(a), count(a) from us;
If I understood correctly you want to count all NULL and all NOT NULL in a column...
If that is correct:
SELECT count(*) FROM us WHERE a IS NULL
UNION ALL
SELECT count(*) FROM us WHERE a IS NOT NULL
Edited to have the full query, after reading the comments :]
SELECT COUNT(*), 'null_tally' AS narrative
FROM us
WHERE a IS NULL
UNION
SELECT COUNT(*), 'not_null_tally' AS narrative
FROM us
WHERE a IS NOT NULL;
Here is a quick and dirty version that works on Oracle :
select sum(case a when null then 1 else 0) "Null values",
sum(case a when null then 0 else 1) "Non-null values"
from us
for non nulls
select count(a)
from us
for nulls
select count(*)
from us
minus
select count(a)
from us
Hence
SELECT COUNT(A) NOT_NULLS
FROM US
UNION
SELECT COUNT(*) - COUNT(A) NULLS
FROM US
ought to do the job
Better in that the column titles come out correct.
SELECT COUNT(A) NOT_NULL, COUNT(*) - COUNT(A) NULLS
FROM US
In some testing on my system, it costs a full table scan.
As i understood your query, You just run this script and get Total Null,Total NotNull rows,
select count(*) - count(a) as 'Null', count(a) as 'Not Null' from us;
usually i use this trick
select sum(case when a is null then 0 else 1 end) as count_notnull,
sum(case when a is null then 1 else 0 end) as count_null
from tab
group by a
Just to provide yet another alternative, Postgres 9.4+ allows applying a FILTER to aggregates:
SELECT
COUNT(*) FILTER (WHERE a IS NULL) count_nulls,
COUNT(*) FILTER (WHERE a IS NOT NULL) count_not_nulls
FROM us;
SQLFiddle: http://sqlfiddle.com/#!17/80a24/5
This is little tricky. Assume the table has just one column, then the Count(1) and Count(*) will give different values.
set nocount on
declare #table1 table (empid int)
insert #table1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10),(NULL),(11),(12),(NULL),(13),(14);
select * from #table1
select COUNT(1) as "COUNT(1)" from #table1
select COUNT(empid) "Count(empid)" from #table1
Query Results
As you can see in the image, The first result shows the table has 16 rows. out of which two rows are NULL. So when we use Count(*) the query engine counts the number of rows, So we got count result as 16. But in case of Count(empid) it counted the non-NULL-values in the column empid. So we got the result as 14.
so whenever we are using COUNT(Column) make sure we take care of NULL values as shown below.
select COUNT(isnull(empid,1)) from #table1
will count both NULL and Non-NULL values.
Note: Same thing applies even when the table is made up of more than one column. Count(1) will give total number of rows irrespective of NULL/Non-NULL values. Only when the column values are counted using Count(Column) we need to take care of NULL values.
I had a similar issue: to count all distinct values, counting null values as 1, too. A simple count doesn't work in this case, as it does not take null values into account.
Here's a snippet that works on SQL and does not involve selection of new values.
Basically, once performed the distinct, also return the row number in a new column (n) using the row_number() function, then perform a count on that column:
SELECT COUNT(n)
FROM (
SELECT *, row_number() OVER (ORDER BY [MyColumn] ASC) n
FROM (
SELECT DISTINCT [MyColumn]
FROM [MyTable]
) items
) distinctItems
Try this..
SELECT CASE
WHEN a IS NULL THEN 'Null'
ELSE 'Not Null'
END a,
Count(1)
FROM us
GROUP BY CASE
WHEN a IS NULL THEN 'Null'
ELSE 'Not Null'
END
Here are two solutions:
Select count(columnname) as countofNotNulls, count(isnull(columnname,1))-count(columnname) AS Countofnulls from table name
OR
Select count(columnname) as countofNotNulls, count(*)-count(columnname) AS Countofnulls from table name
Try
SELECT
SUM(ISNULL(a)) AS all_null,
SUM(!ISNULL(a)) AS all_not_null
FROM us;
Simple!
If you're using MS Sql Server...
SELECT COUNT(0) AS 'Null_ColumnA_Records',
(
SELECT COUNT(0)
FROM your_table
WHERE ColumnA IS NOT NULL
) AS 'NOT_Null_ColumnA_Records'
FROM your_table
WHERE ColumnA IS NULL;
I don't recomend you doing this... but here you have it (in the same table as result)
use ISNULL embedded function.
All the answers are either wrong or extremely out of date.
The simple and correct way of doing this query is using COUNT_IF function.
SELECT
COUNT_IF(a IS NULL) AS nulls,
COUNT_IF(a IS NOT NULL) AS not_nulls
FROM
us
SELECT SUM(NULLs) AS 'NULLS', SUM(NOTNULLs) AS 'NOTNULLs' FROM
(select count(*) AS 'NULLs', 0 as 'NOTNULLs' FROM us WHERE a is null
UNION select 0 as 'NULLs', count(*) AS 'NOTNULLs' FROM us WHERE a is not null) AS x
It's fugly, but it will return a single record with 2 cols indicating the count of nulls vs non nulls.
This works in T-SQL. If you're just counting the number of something and you want to include the nulls, use COALESCE instead of case.
IF OBJECT_ID('tempdb..#us') IS NOT NULL
DROP TABLE #us
CREATE TABLE #us
(
a INT NULL
);
INSERT INTO #us VALUES (1),(2),(3),(4),(NULL),(NULL),(NULL),(8),(9)
SELECT * FROM #us
SELECT CASE WHEN a IS NULL THEN 'NULL' ELSE 'NON-NULL' END AS 'NULL?',
COUNT(CASE WHEN a IS NULL THEN 'NULL' ELSE 'NON-NULL' END) AS 'Count'
FROM #us
GROUP BY CASE WHEN a IS NULL THEN 'NULL' ELSE 'NON-NULL' END
SELECT COALESCE(CAST(a AS NVARCHAR),'NULL') AS a,
COUNT(COALESCE(CAST(a AS NVARCHAR),'NULL')) AS 'Count'
FROM #us
GROUP BY COALESCE(CAST(a AS NVARCHAR),'NULL')
Building off of Alberto, I added the rollup.
SELECT [Narrative] = CASE
WHEN [Narrative] IS NULL THEN 'count_total' ELSE [Narrative] END
,[Count]=SUM([Count]) FROM (SELECT COUNT(*) [Count], 'count_nulls' AS [Narrative]
FROM [CrmDW].[CRM].[User]
WHERE [EmployeeID] IS NULL
UNION
SELECT COUNT(*), 'count_not_nulls ' AS narrative
FROM [CrmDW].[CRM].[User]
WHERE [EmployeeID] IS NOT NULL) S
GROUP BY [Narrative] WITH CUBE;
SELECT
ALL_VALUES
,COUNT(ALL_VALUES)
FROM(
SELECT
NVL2(A,'NOT NULL','NULL') AS ALL_VALUES
,NVL(A,0)
FROM US
)
GROUP BY ALL_VALUES
select count(isnull(NullableColumn,-1))
if its mysql, you can try something like this.
select
(select count(*) from TABLENAME WHERE a = 'null') as total_null,
(select count(*) from TABLENAME WHERE a != 'null') as total_not_null
FROM TABLENAME
Just in case you wanted it in a single record:
select
(select count(*) from tbl where colName is null) Nulls,
(select count(*) from tbl where colName is not null) NonNulls
;-)
for counting not null values
select count(*) from us where a is not null;
for counting null values
select count(*) from us where a is null;
I created the table in postgres 10 and both of the following worked:
select count(*) from us
and
select count(a is null) from us
In my case I wanted the "null distribution" amongst multiple columns:
SELECT
(CASE WHEN a IS NULL THEN 'NULL' ELSE 'NOT-NULL' END) AS a_null,
(CASE WHEN b IS NULL THEN 'NULL' ELSE 'NOT-NULL' END) AS b_null,
(CASE WHEN c IS NULL THEN 'NULL' ELSE 'NOT-NULL' END) AS c_null,
...
count(*)
FROM us
GROUP BY 1, 2, 3,...
ORDER BY 1, 2, 3,...
As per the '...' it is easily extendable to more columns, as many as needed
Number of elements where a is null:
select count(a) from us where a is null;
Number of elements where a is not null:
select count(a) from us where a is not null;