I'm new to FreeRadius and Google secure LDAP but I'm trying to set it up so we can use it via zonedirector for byod wifi authentication.
I've followed guides from Google and from within config files that came with freeRADIUS and I think I'm close but when I try to start my server I get the following error:
rlm_ldap (ldap_google): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap_google): Failed setting connection option new TLS context: Unknown error
rlm_ldap (ldap_google): Opening connection failed (0)
rlm_ldap (ldap_google): Removing connection pool
/etc/freeradius/3.0/mods-enabled/ldap_goolge[59]: Instantation failed for module "ldap_google"
I haven't been able to find any info on this error so any pointers would be appreciated.
Related
I was using wget to download GEDI data from LP DAAC data pool. It always returns an error of "unable to establish SSL connection". I attempted wget in promote or Pycharm and added the "--no-check-certificate" configuration.
The wget is the newest release (1.21.3,64bit).
OS: windows11.
from the following massages, I guess the connection to EarthData is successful because it returns the data downloading link that I can open manually in the browser and then can start downloading. This error could happen in the last step that wget starts accessing the returned link and then downloading.
returned messages:
--2022-08-14 09:51:09-- https://e4ftl01.cr.usgs.gov//GEDI_L1_L2/GEDI/GEDI01_B.002/2019.04.20/GEDI01_B_2019110092939_O01996_01_T03334_02_005_01_V002.h5
Resolving e4ftl01.cr.usgs.gov (e4ftl01.cr.usgs.gov)... 2001:49c8:4000:127d::133:130, 152.61.133.130
Connecting to e4ftl01.cr.usgs.gov (e4ftl01.cr.usgs.gov)|2001:49c8:4000:127d::133:130|:443... failed: Bad file descriptor.
Connecting to e4ftl01.cr.usgs.gov (e4ftl01.cr.usgs.gov)|152.61.133.130|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://urs.earthdata.nasa.gov/oauth/authorize?scope=uid&app_type=401&client_id=ijpRZvb9qeKCK5ctsn75Tg&response_type=code&redirect_uri=https%3A%2F%2Fe4ftl01.cr.usgs.gov%2Foauth&state=aHR0cHM6Ly9lNGZ0bDAxLmNyLnVzZ3MuZ292Ly9HRURJX0wxX0wyL0dFREkvR0VESTAxX0IuMDAyLzIwMTkuMDQuMjAvR0VESTAxX0JfMjAxOTExMDA5MjkzOV9PMDE5OTZfMDFfVDAzMzM0XzAyXzAwNV8wMV9WMDAyLmg1 [following]
--2022-08-14 09:51:55-- https://urs.earthdata.nasa.gov/oauth/authorize?scope=uid&app_type=401&client_id=ijpRZvb9qeKCK5ctsn75Tg&response_type=code&redirect_uri=https%3A%2F%2Fe4ftl01.cr.usgs.gov%2Foauth&state=aHR0cHM6Ly9lNGZ0bDAxLmNyLnVzZ3MuZ292Ly9HRURJX0wxX0wyL0dFREkvR0VESTAxX0IuMDAyLzIwMTkuMDQuMjAvR0VESTAxX0JfMjAxOTExMDA5MjkzOV9PMDE5OTZfMDFfVDAzMzM0XzAyXzAwNV8wMV9WMDAyLmg1
Resolving urs.earthdata.nasa.gov (urs.earthdata.nasa.gov)... 2001:4d0:241a:4081::89, 198.118.243.33
Connecting to urs.earthdata.nasa.gov (urs.earthdata.nasa.gov)|2001:4d0:241a:4081::89|:443... failed: Bad file descriptor.
Connecting to urs.earthdata.nasa.gov (urs.earthdata.nasa.gov)|198.118.243.33|:443... connected.
Unable to establish SSL connection.
I'm completely new to RabbitMQ and now I'm looking for a configuration error. The client doesn't receive any messages from RabbitMQ and I debugged it as far as possible.
Frontend messages:
Message 1:
CONNECT
login:frontend_listener
passcode:xxx
accept-version:1.0,1.1,1.2
heart-beat:20000,0
Message 2:
ERROR
message:Bad CONNECT
content-type:text/plain
version:1.0,1.1,1.2
content-length:30
Virtual host '/' access denied
There are two vHosts: / and someVhost and there are different users like frontend_listener. Now I found a way to access the log file.
RabbitMQ log file:
2020-02-11 15:50:53.579 [warning] <0.798.0> STOMP login failed for user "frontend_listener"
2020-02-11 15:50:53.579 [error] <0.798.0> STOMP error frame sent:
Message: "Bad CONNECT"
Detail: "Access refused for user 'frontend_listener'\n"
Server private detail: none
...
2020-02-11 15:51:25.349 [info] <0.850.0> Creating user 'frontend_listener'
2020-02-11 15:51:30.374 [info] <0.857.0> Setting permissions for 'frontend_listener' in 'someVhost' to '$', '$', 'client-notification.*'
2020-02-11 15:51:54.980 [warning] <0.867.0> STOMP login failed - not_allowed (vhost access not allowed)~n
2020-02-11 15:51:54.980 [error] <0.867.0> STOMP error frame sent:
Message: "Bad CONNECT"
Detail: "Virtual host '/' access denied"
Server private detail: none
2020-02-11 15:52:56.427 [warning] <0.875.0> STOMP login failed - not_allowed (vhost access not allowed)~n
It reads like the permissions are wrong. Can someone help me out interpreting that correctly?
I try to read it: User frontend_listener wants to access the vHost /, but it hasn't sufficient permissions (don't know what $ here mean other than a part of regular expression). The thing is, that I don't know if that is the correct vHost. How do I find out the URL of each vHost?
I'm asking this because I believe that the mapping to the vHost is wrong or something is missing.
Edit:
After adding host: 'someVhost' to my stomp-config.ts I was able to subscribe to the queues. Now I get the following error in the log:
2020-02-12 16:32:25.913 [error] <0.5159.1> Channel error on connection <0.5149.1> (127.0.0.1:58136 -> 127.0.0.1:15674, vhost: 'someVhost', user: 'frontend_listener'), channel 1:
operation basic.consume caused a channel exception access_refused: access to queue 'stomp-subscription-SZ3-PO1-PbZroPol-WXSQw' in vhost 'someVhost' refused for user 'frontend_listener'
2020-02-12 16:32:26.022 [error] <0.5145.1> STOMP error frame sent:
Message: access_refused
On the frontend I don't get a message or error.
You need to also pass host information in the STOMP CONNECT frame..
this is what the specifications says and clients MUST set this header
host : The name of a virtual host that the client wishes to connect to. It is recommended clients set this to the host name that the socket was established against, or to any name of their choosing. If this header does not match a known virtual host, servers supporting virtual hosting MAY select a default virtual host or reject the connection.
So this is how your CONNET frame should look
CONNECT
login:frontend_listener
passcode:xxx
accept-version:1.0,1.1,1.2
host: someVhost
heart-beat:20000,0
I'm using dcm4chee docker stack with ldap and postgreSQL and have a floating error:
ldap:389; socket closed; remaining name 'cn=Devices,cn=DICOM Configuration,dc=mdw,dc=io'
2018-07-13 06:30:42,089 INFO [org.dcm4che3.conf.ldap.ReconnectDirContext] (Thread-0 (ActiveMQ-client-global-threads)) Connection to ldap://ldap:389 broken - reconnect
All three services are running on the same host. What can I do to avoid that error?
Disable the firewall. If firewall was enabled add an exception for all 3 services.
Whilst trying to send email using GMAIL on the PDI job, I face a connection timed out error.
Settings were as give below
SMTP ->smtp.gmail.com
Port -> 465 (also tried with 587 and 25)
And followed by SSL connection with my full credentials.
This is the error I am getting
2016/08/24 11:56:48 - Mail - ERROR (version 6.1.0.1-196, build 1 from 2016-04-07 12.08.49 by buildguy) : Problem while sending message: javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465;
nested exception is:
java.net.ConnectException: Connection timed out: connect
I see a similar open question here but with little help
Any help?
by using below server configuration i used to send mail from PDI
1.SMTP ->smtp.gmail.com
2.Port -> 465
3. use authentication [check this]
4.authentication user (use your gmail id)
5.authentication password (use your gmail password)
6.use secure authentication
7. secure connection type = SSL
when this job will execute in your gmail account a security concern mail will be sent by gmail team and you need to allow that security check
i am trying to fetch my mail from gmail account and store it into my database now i am facing an error during run server using gem 'imap_processor', '~> 1.6'
C:/RailsInstaller/Ruby2.2.0/lib/ruby/2.2.0/net/imap.rb:1057:in `initialize': A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. - connect(2) for "smtp.gmail.com" port 143 (Errno::ETIMEDOUT)
Unable to load application: Errno::ETIMEDOUT: A connection attempt
failed because the connected party did not properly respond after a
period of time, or established connection failed because connected
host has failed to respond. - connect(2) for "smtp.gmail.com" port
143
imap = Net::IMAP.new('smtp.gmail.com')
imap.authenticate('LOGIN', 'debasish.industrify2016#gmail.com', '*******')
imap.examine('INBOX')
imap.search(["RECENT"]).each do |message_id|
envelope = imap.fetch(message_id, "ENVELOPE")[0].attr["ENVELOPE"]
puts "#{envelope.from[0].name}: \t#{envelope.subject}"
end
can any one guide me ?