How can I delete only the field of a column without deleting the entire row? I have a table that owns the fields:
ID, Name, Mail, Phone, Company and Would like to delete only the email of a person without deleting all the fields.
If I use:
DELETE FROM TEST_TABLE WHERE MAIL = 'myemail#gmail.com'
that way will delete everything and I want to delete just the email
you can use this
Update myTable set MyColumn = NULL where Field = Condition.
References
1- How do I set a column value to NULL in SQL Server Management Studio?
2- UPDATE, DELETE, and INSERT Statements in SQL
try
UPDATE
TEST_TABLE
SET
MAIL = ''
WHERE
id = your_id
or
if you want delete the field
ALTER TABLE TEST_TABLE
DROP COLUMN MAIL;
It is good practice to update the field with a NULL instead of leaving it blank, this indicates that there is a missing value and will later allow you to do queries where something is NOT NULL, which will give better results if it isn't returning bad data. Remember, garbage in, garbage out.
UPDATE TEST_TABLE SET MAIL = NULL WHERE MAIL = 'myemail#gmail.com'
Related
I have a main table that I am trying to update from a table that only has fields populated that need to be updated in the main table, using a unique ID to ensure I am updating only matched records. Here is what the SQL string looks like for the query:
UPDATE [tblMain] INNER JOIN tblUpdate ON tblMain.UUID = tblUpdate.UUID
SET tblMain.contractName = tblUpdate.contractName
WHERE ((tblUpdate.contractName) IS NOT NULL);
The idea is to only pull the fields from the update table that actually have data, and ignore the fields that are either NULL, blank, or empty. To be clear, I want to include ALL records in the tbleUpdate, but only update with the fields that contain data. How can I do this?
If you want to UPDATE one table from another in MS Access, you should do this
UPDATE tblMain, tblUpdate
SET tblMain.contractName = tblUpdate.contractName
WHERE tblMain.UUID = tblUpdate.UUID
AND tblUpdate.contractName IS NOT NULL
I have had a look at similar problems, however none of the answers helped in my case.
Just a little bit of background. I have Two databases, both have the same table with the same fields and structure. Data already exists in both tables. I want to overwrite and add to the data in db1.table from db2.table the primary ID is causing a problem with the update.
When I use the query:
USE db1;
INSERT INTO db2.table(field_id,field1,field2)
SELECT table.field_id,table.field1,table.field2
FROM table;
It works to a blank table, because none of the primary keys exist. As soon as the primary key exists it fails.
Would it be easier for me to overwrite the primary keys? or find the primary key and update the fields related to the field_id? Im really not sure how to go ahead from here. The data needs to be migrated every 5min, so possibly a stored procedure is required?
first you should try to add new records then update all records.you can create a procedure like below code
PROCEDURE sync_Data(a IN NUMBER ) IS
BEGIN
insert into db2.table
select *
from db1.table t
where t.field_id not in (select tt.field_id from db2.table tt);
begin
for t in (select * from db1.table) loop
update db2.table aa
set aa.field1 = t.field1,
aa.field2 = t.field2
where aa.field_id = t.field_id;
end loop;
end;
END sync_Data
Set IsIdentity to No in Identity Specification on the table in which you want to move data, and after executing your script, set it to Yes again
I ended up just removing the data in the new database and sending it again.
DELETE FROM db2.table WHERE db2.table.field_id != 0;
USE db1;
INSERT INTO db2.table(field_id,field1,field2)
SELECT table.field_id,table.field1,table.field2
FROM table;
Its not very efficient, but gets the job done. I couldnt figure out the syntax to correctly do an UPDATE or to change the IsIdentity field within MariaDB, so im not sure if they would work or not.
The overhead of deleting and replacing non-trivial amounts of data for an entire table will be prohibitive. That said I'd prefer to update in place (merge) over delete /replace.
USE db1;
INSERT INTO db2.table(field_id,field1,field2)
SELECT t.field_id,t.field1,t.field2
FROM table t
ON DUPLICATE KEY UPDATE field1 = t.field1, field2 = t.field2
This can be used inside a procedure and called every 5 minutes (not recommended) or you could build a trigger that fires on INSERT and UPDATE to keep the tables in sync.
INSERT INTO database1.tabledata SELECT * FROM database2.tabledata;
But you have to keep length of varchar length larger or equal to database2 and keep the same column name
In a database application, I want to insert, update and delete records in a table of database.
Table is as below:
In this table, Ga1_ID is Primary Key.
Suppose, I insert 5 records as show currently.
In second attempt, if I want to insert 5 other records and if any of these new records contains a primary key attribute which is already present in table it show error. Its fine.
But, when I insert new 5 records... how I can verify these new records's primary key value is not present. I mean, how to match or calculate the already present primary key attributes and then insert new records.
What is the best approach to manage this sort of situation ?
use following query in dataadapter:
da=new SqlDataAdapter("select Ga1_ID from table where Ga1_ID=#pkVal",conn);
DataSet=new DataSet();
da.fill(ds);
//pass parameter for #pkVal
da.SelectCommand.Parameters(1).Value = pkValue;
if(ds.Tables[0].Rows.Count>0) //If number of rows >0 then record exists
BEGIN
messagebox.show("Primary key present");
END
Hope its helpful.
Do not check existing records in advance, i.e. do not SELECT and then INSERT. A better (and pretty common) approach is to try to INSERT and handle exceptions, in particular, catch a primary key violation if any and handle it.
Do the insert in a try/catch block, with different handling in case of a primary key violation exception and other sql exception types.
If there was no exception, then job's done, record was inserted.
If you caught a primary key violation exception, then handle it appropriately (your post does not specify what you want to do in this case, and it's completely up to you)
If you want to perform 5 inserts at once and want to make sure they all succeed or else roll back if any of them failed, then do the inserts within a transaction.
you can do a lookup first before inserting.
IF EXISTS (SELECT * FROM tableName WHERE GA1_id=#newId)
BEGIN
UPDATE tableName SET Ga1_docid = #newdocID, GA1_fieldNAme = #newName, Ga1_fieldValue = #newVal where GA1_id=#newId
END
ELSE
BEGIN
INSERT INTO tableName(GA1_ID, Ga1_docid, GA1_fieldNAme Ga1_fieldValue) VALUES (value1,val2,value3,value4)
END
If you're using SQL Server 2012, use a sequence object - CREATE SEQUENCE.
This way you can get the next value using NEXT VALUE FOR.
With an older SQL Server version, you need to create the primary key field as an IDENTITY field and use the SCOPE_IDENTITY function to get the last identity value and then increment it manually.
Normally, you would like to have a surrogate key wich is generally an identity column that will automatically increment when you are inserting rows so that you don't have to care about knowing which id already exists.
However, if you have to manually insert the id there's a few alternatives for that and knowing wich SQL database you are using would help, but in most SQL implementations, you should be able to do something like:
IF NOT EXISTS
IF NOT EXISTS(
SELECT 1
FROM your_table
WHERE Ga1_ID = 1
)
INSERT INTO ...
SELECT WHERE NOT EXISTS
INSERT INTO your_table (col_1, col_2)
SELECT col_1, col_2
FROM (
SELECT 1 AS col_1, 2 AS col_2
UNION ALL
SELECT 3, 4
) q
WHERE NOT EXISTS (
SELECT 1
FROM your_table
WHERE col_1 = q.col_1
)
For MS SQL Server, you can also look at the MERGE statement and for MySQL, you can use the INSERT IGNORE statement.
One attribute in a table became corrupted after a certain point in a table of mine. I want to delete every pat_coun attribute if it has an ID that begins with 11 (number, not text). So I don't want to get rid of any of the records in the database, just clear out the attribute pat_coun if it's ID begins with 11
DELETE pat_coun from myTable
WHERE id %11
Just want to make sure this is right before I go deleting stuff. Thanks.
To clear out an attribute, do NOT use the DELETE function! That deletes a row from your table!
You need to use UPDATE instead:
UPDATE myTable
SET pat_coun = NULL
WHERE id LIKE '11%'
If you want to delete a record (a row) you can use
DELETE FROM myTable
WHERE condition
If you just want to "clear" a particular column you should use
UPDATE myTable
SET pat_coun = 0 // or NULL or whatever you please
WHERE condition
For condition IMHO you should convert your number to string and check like this
WHERE CONVERT(VARCHAR(20), pat_coun) LIKE '11%'
try this
update myTable
set pat_coun = null
where id like '11%'
If I have a table with this fields:
int:id_account
int:session
string:password
Now for a login statement I run this sql UPDATE command:
UPDATE tbl_name
SET session = session + 1
WHERE id_account = 17 AND password = 'apple'
Then I check if a row was affected, and if one indeed was affected I know that the password was correct.
Next what I want to do is retrieve all the info of this affected row so I'll have the rest of the fields info.
I can use a simple SELECT statement but I'm sure I'm missing something here, there must be a neater way you gurus know, and going to tell me about (:
Besides it bothered me since the first login sql statement I ever written.
Is there any performance-wise way to combine a SELECT into an UPDATE if the UPDATE did update a row?
Or am I better leaving it simple with two statements? Atomicity isn't needed, so I might better stay away from table locks for example, no?
You should use the same WHERE statement for SELECT. It will return the modified rows, because your UPDATE did not change any columns used for lookup:
UPDATE tbl_name
SET session = session + 1
WHERE id_account = 17 AND password = 'apple';
SELECT *
FROM tbl_name
WHERE id_account = 17 AND password = 'apple';
An advice: never store passwords as plain text! Use a hash function, like this:
MD5('apple')
There is ROW_COUNT() (do read about details in the docs).
Following up by SQL is ok and simple (which is always good), but it might unnecessary stress the system.
This won't work for statements such as...
Update Table
Set Value = 'Something Else'
Where Value is Null
Select Value From Table
Where Value is Null
You would have changed the value with the update and would be unable to recover the affected records unless you stored them beforehand.
Select * Into #TempTable
From Table
Where Value is Null
Update Table
Set Value = 'Something Else'
Where Value is Null
Select Value, UniqueValue
From #TempTable TT
Join Table T
TT.UniqueValue = T.UniqueValue
If you're lucky, you may be able to join the temp table's records to a unique field within Table to verify the update. This is just one small example of why it is important to enumerate records.
You can get the effected rows by just using ##RowCount..
select top (Select ##RowCount) * from YourTable order by 1 desc