I know this error is suppose to be resolved by configuring the idea.properties file and that's exactly what I have done yet this error still occurs.
I've set the idea.max.content.load.filesize in idea.properties to 2500000 yet I'm still facing this error. Anybody know why?
Error
The file size (47.96 MB) exceeds the configured limit (2.59 MB). Code insight features are not available
Try following this article
Important part is editing idea.max.intellisense.filesize key.
Related
when uploading a large file with uploadfield i get the error.
"Server responded with an error.
Expected a value of type "Int" but received: 4008021167"
to set the allowed filesize i used $upload->getValidator()->setAllowedMaxFileSize(6291456000);
$upload is an UploadField.
every file larger than 2gb gets this error. smaller files are uploaded without any error.
where can i adjust that i can upload bigger files.
I remember that there has been a 2GB border in the past, but i don't know where to adjust it
thanks for your answers
klaus
The regular file upload limits don't seem to be the issue, if you are already at 2 GB. This might be the memory limit of the process itself. I would recommend looking into chunked uploads - this allows you processing larger files.
I know, this answer is late - but the problem is rooted in the graphQL type definition of the File type (it is set to Int). I've submitted a pull request to the upstream repository. Also here is the sed one-liner to patch it:
sed -i 's/size\: Int/size\: Float/g' vendor/silverstripe/asset-admin/_graphql/types/File.yml
I'm attempting to compile a .NET program on Linux (Nexus Mod Manager), but I keep encountering a single error related to a resource file. The exact error message is as follows:
/usr/lib/mono/msbuild/15.0/bin/Microsoft.Common.CurrentVersion.targets(3069,5): error MSB3554: Cannot write to the output file "/home/max/git/Nexus-Mod-Manager/Stage/obj/Debug/Nexus.Client.Properties.Resources.resources". A null reference or invalid value was found [GDI+ status: InvalidParameter] [/home/max/git/Nexus-Mod-Manager/NexusClient/NexusClient.csproj]
I don't know enough about the .NET toolchain to determine what the exact problem is, as the error message only references this file, and Google has been little help - I've encountered only one other instance of this particular error, and it provided no leads. Any assistance would be greatly appreciated.
I had glossed over the line before the error, which was:
** (process:7084): WARNING **: 15:40:35.709: PNG images with 64bpp aren't supported by libgdiplus.
I realized my mistake after bisecting the resource files included in the Resources.resx file and discovering which one it was. Re-rendering the problem image in GIMP resolved the issue.
While uploading .pdf files bigger than 1MB in size through assets in Hippo CMS it gives an error "File type not allowed".
I have already checked MySQL configuration and checked /hippo:configuration/hippo:frontend/cms/cms-services/assetValidationService node in hippo console, where default value is 10M.
So the specific question is:
How do you fix the error and are able to upload files bigger than 1MB in Hippo CMS of .pdf type.
checkout:
http://www.onehippo.org/library/concepts/editor-interface/image-and-asset-upload-validation.html
Here you can see how to set the file size limit. Note that there is also possibly a wicket setting you have to be aware of. Details in the page.
Though I wouldn't expect it to return file type not allowed if the problems was the size of the file. Perhaps the file is not validating as a pdf?
The problem was actually on the server of nginx. The server was rejecting all files bigger then 1MB and after long check at the logs the setting got changed to appropriate size.
I also gave the vote to Jasper since that can also be solution and it effects the same problem.
I am trying to implement a parallelized algorithm using Apache hadoop, however I am facing some issues when trying to transfer a file from the local file system to hdfs. A checksum exception is being thrown when trying to read from or transfer a file.
The strange thing is that some files are being successfully copied while others are not (I tried with 2 files, one is slightly bigger than the other, both are small in size though). Another observation that I have made is that the Java FileSystem.getFileChecksum method, is returning a null in all cases.
A slight background on what I am trying to achieve: I am trying to write a file to hdfs, to be able to use it as a distributed cache for the mapreduce job that I have written.
I have also tried the hadoop fs -copyFromLocal command from the terminal, and the result is the exact same behaviour as when it is done through the java code.
I have looked all over the web, including other questions here on stackoverflow however I haven't managed to solve the issue. Please be aware that I am still quite new to hadoop so any help is greatly appreciated.
I am attaching the stack trace below which shows the exceptions being thrown. (In this case I have posted the stack trace resulting from the hadoop fs -copyFromLocal command from terminal)
name#ubuntu:~/Desktop/hadoop2$ bin/hadoop fs -copyFromLocal ~/Desktop/dtlScaleData/attr.txt /tmp/hadoop-name/dfs/data/attr2.txt
13/03/15 15:02:51 INFO util.NativeCodeLoader: Loaded the native-hadoop library
13/03/15 15:02:51 INFO fs.FSInputChecker: Found checksum error: b[0, 0]=
org.apache.hadoop.fs.ChecksumException: Checksum error: /home/name/Desktop/dtlScaleData/attr.txt at 0
at org.apache.hadoop.fs.ChecksumFileSystem$ChecksumFSInputChecker.readChunk(ChecksumFileSystem.java:219)
at org.apache.hadoop.fs.FSInputChecker.readChecksumChunk(FSInputChecker.java:237)
at org.apache.hadoop.fs.FSInputChecker.read1(FSInputChecker.java:189)
at org.apache.hadoop.fs.FSInputChecker.read(FSInputChecker.java:158)
at java.io.DataInputStream.read(DataInputStream.java:100)
at org.apache.hadoop.io.IOUtils.copyBytes(IOUtils.java:68)
at org.apache.hadoop.io.IOUtils.copyBytes(IOUtils.java:47)
at org.apache.hadoop.io.IOUtils.copyBytes(IOUtils.java:100)
at org.apache.hadoop.fs.FileUtil.copy(FileUtil.java:230)
at org.apache.hadoop.fs.FileUtil.copy(FileUtil.java:176)
at org.apache.hadoop.fs.FileSystem.copyFromLocalFile(FileSystem.java:1183)
at org.apache.hadoop.fs.FsShell.copyFromLocal(FsShell.java:130)
at org.apache.hadoop.fs.FsShell.run(FsShell.java:1762)
at org.apache.hadoop.util.ToolRunner.run(ToolRunner.java:65)
at org.apache.hadoop.util.ToolRunner.run(ToolRunner.java:79)
at org.apache.hadoop.fs.FsShell.main(FsShell.java:1895)
copyFromLocal: Checksum error: /home/name/Desktop/dtlScaleData/attr.txt at 0
You are probably hitting the bug described in HADOOP-7199. What happens is that when you download a file with copyToLocal, it also copies a crc file in the same directory, so if you modify your file and then try to do copyFromLocal, it will do a checksum of your new file and compare to your local crc file and fail with a non descriptive error message.
To fix it, please check if you have this crc file, if you do just remove it and try again.
I face the same problem solved by removing .crc files
Ok so I managed to solve this issue and I'm writing the answer here just in case someone else encounters the same problem.
What I did was simply create a new file and copied all the contents from the problematic file.
From what I can presume it looks like some crc file is being created and attached to that particular file, hence by trying with another file, another crc check will be carried out. Another reason could be that I have named the file attr.txt, which could be a conflicting file name with some other resource. Maybe someone could expand even more on my answer, since I am not 100% sure on the technical details and these are just my observations.
CRC file holds serial number for the Particular block data. Entire data is spiltted into Collective Blocks. Each block stores metada along with the CRC file inside /hdfs/data/dfs/data folder. If some one makes correction to the CRC files...the actual and current CRC serial numbers would mismatch and it causes the ERROR!! Best practice to fix this ERROR is to do override the meta data file along with CRC file.
I got the exact same problem and didn't fid any solution. Since this was my first hadoop experience, I could not follow some instruction over the internet. I solved this problem by formatting my namenode.
hadoop namenode -format
I am using Intellij 9.0.4 I checked out a project from SVN, set up tomcat (its running locally), and now I am trying to Make (or Compile) but it keeps giving me Error:Compiler internal error. Process terminated with exit code 3. I have searched the internet and couldn't get this type exit code 3.
Do you have any idea? Or which log file should I have to check to see details of the problem?
Thanks
SOLVED: I got it. Just increase the maximum heap size of the compiler(Setting->Compiler->Java Compiler)
SOLVED: I got it. Just increase the maximum heap size of the compiler(Setting->Compiler->Java Compiler)