I have a table with a field District which is VARCHAR(5)
When I create a computed field:
ALTER TABLE
Postcode
ADD
DistrictSort1
AS
(dbo.fn_StripCharacters(District, '^A-Z'))
PERSISTED;
The computed field DistrictSort1 is added as NVARCHAR(MAX)
Is it possible to change the NVARCHAR to anything other than (MAX)?
Are there any performance issues?
The obvious answer would be to CAST/CONVERT the value explicitly in your computed column:
ALTER TABLE dbo.Postcode
ADD DistrictSort1 AS CONVERT(varchar(5),(dbo.fn_StripCharacters(District, '^A-Z')) PERSISTED;
I would, however, suggest looking at your function fn_StripCharacters, which is currently set up to return an nvarchar(MAX). User defined functions, unlike those built into SQL Server, cannot return different data types based on their input parameter(s). As a result, whenever you reference your function, you will get an nvarchar(MAX) back.
As a result, sometimes it's best to have multiple similar versions of the same function. For one like this, form example, you might want 4, that return varchar and nvarchar values in non-MAX and MAX lengths.
Related
How do I alter a sql varchar column to a decimal column when there are nulls in the data?
I thought:
ALTER TABLE table1
ALTER COLUMN data decimal(19,6)
But I just get an error, I assume because of the nulls:
Error converting data type varchar to numeric. The statement has been terminated.
So I thought to remove the nulls I could just set them to zero:
ALTER TABLE table1
ALTER COLUMN data decimal(19,6) NOT NULL DEFAULT 0
but I dont seem to have the correct syntax.
Whats the best way to convert this column?
edit
People have suggested it's not the nulls that are causing me the problem, but non-numeric data. Is there an easy way to find the non-numeric data and either disregard it, or highlight it so I can correct it.
If it were just the presence of NULLs, I would just opt for doing this before the alter column:
update table1 set data = '0' where data is null
That would ensure all nulls are gone and you could successfully convert.
However, I wouldn't be too certain of your assumption. It seems to me that your new column is perfectly capable of handling NULL values since you haven't specified not null for it.
What I'd be looking for is values that aren't NULL but also aren't something you could turn in to a real numeric value, such as what you get if you do:
insert into table1 (data) values ('paxdiablo is good-looking')
though some may argue that should be treated a 0, a false-y value :-)
The presence of non-NULL, non-numeric data seems far more likely to be causing your specific issue here.
As to how to solve that, you're going to need a where clause that can recognise whether a varchar column is a valid numeric value and, if not, change it to '0' or NULL, depending on your needs.
I'm not sure if SQL Server has regex support but, if so, that'd be the first avenue I'd investigate.
Alternatively, provided you understand the limitations (a), you could use isnumeric() with something like:
update table1 set data = NULL where isnumeric(data) = 0
This will force all non-numeric values to NULL before you try to convert the column type.
And, please, for the love of whatever deities you believe in, back up your data before attempting any of these operations.
If none of those above solutions work, it may be worth adding a brand new column and populating bit by bit. In other words set it to NULL to start with, and then find a series of updates that will copy data to this new column.
Once you're happy that all data has been copied, you should then have a series of updates you can run in a single transaction if you want to do the conversion in one fell swoop. Drop the new column and then do the whole lot in a single operation:
create new column;
perform all updates to copy data;
drop old column;
rename new column to old name.
(a) From the linked page:
ISNUMERIC returns 1 for some characters that are not numbers, such as plus (+), minus (-), and valid currency symbols such as the dollar sign ($).
Possible solution:
CREATE TABLE test
(
data VARCHAR(100)
)
GO
INSERT INTO test VALUES ('19.01');
INSERT INTO test VALUES ('23.41');
ALTER TABLE test ADD data_new decimal(19,6)
GO
UPDATE test SET data_new = CAST(data AS decimal(19,6));
ALTER TABLE test DROP COLUMN data
GO
EXEC sp_RENAME 'test.data_new' , 'data', 'COLUMN'
As people have said, that error doesn't come from nulls, it comes from varchar values that can't be converted to decimal. Most typical reason for this I've found (after checking that the column doesn't contain any logically false values, like non-digit characters or double comma values) is when your varchar values use comma for decimal pointer, as opposed to period.
For instance, if you run the following:
DECLARE #T VARCHAR(256)
SET #T = '5,6'
SELECT #T, CAST(#T AS DEC(32,2))
You will get an error.
Instead:
DECLARE #T VARCHAR(256)
SET #T = '5,6'
-- Let's change the comma to a period
SELECT #T = REPLACE(#T,',','.')
SELECT #T, CAST(#T AS DEC(32,2)) -- Now it works!
Should be easy enough to look if your column has these cases, and run the appropriate update before your ALTER COLUMN, if this is the cause.
You could also just use a similar idea and make a regex search on the column for all values that don't match digit / digit+'.'+digit criteria, but i suck with regex so someone else can help with that. :)
Also, the american system uses weird separators like the number '123100.5', which would appear as '123,100.5', so in those cases you might want to just replace the commas with empty strings and try then?
I have a column which I believe has been declared wrongly. It contains data and I do not wish to lose the data.
I wish to change the definition from varchar(max) to varchar(an integer). I was under the impression I cannot just alter the column type?
Is the best method to create a temp column, "column2", transfer the data to this column, from the column with the problematic type, delete the problem column and then rename the temp column to the original problematic column?
If so, how do I copy the values from the problem column to the new column?
EDIT: For anyone with same problem, you can just use the ALTER statements.
As long as the data types are somewhat "related" - yes, you can absolutely do this.
You can change an INT to a BIGINT - the value range of the second type is larger, so you're not in danger of "losing" any data.
You can change a VARCHAR(50) to a VARCHAR(200) - again, types are compatible, size is getting bigger - no risk of truncating anything.
Basically, you just need
ALTER TABLE dbo.YourTable
ALTER COLUMN YourColumn VARCHAR(200) NULL
or whatever. As long as you don't have any string longer than those 200 characters, you'll be fine. Not sure what happens if you did have longer strings - either the conversion will fail with an error, or it will go ahead and tell you that some data might have been truncated. So I suggest you first try this on a copy of your data :-)
It gets a bit trickier if you need to change a VARCHAR to an INT or something like that - obviously, if you have column values that don't "fit" into the new type, the conversion will fail. But even using a separate "temporary" new column won't fix this - you need to deal with those "non-compatible" cases somehow (ignore them, leave NULL in there, set them to a default value - something).
Also, switching between VARCHAR and NVARCHAR can get tricky if you have e.g. non-Western European characters - you might lose certain entries upon conversion, since they can't be represented in the other format, or the "default" conversion from one type to the other doesn't work as expected.
Calculate the max data length store int that column of that table.
Select max(len(fieldname)) from tablename
Now you can decrease the size of that column up to result got in previous query.
ALTER TABLE dbo.YourTable
ALTER COLUMN YourColumn VARCHAR(200) NULL
According to the PostgreSQL docs, you can simply alter table
ALTER TABLE products ALTER COLUMN price TYPE numeric(10,2);
But here's the thing
This will succeed only if each existing entry in the column can be converted to the new type by an implicit cast. If a more complex conversion is needed, you can add a USING clause that specifies how to compute the new values from the old.
add a temp column2 with type varchar(NN), run update tbl set column2 = column, check if any error happens; if everything is fine, alter your original column, copy data back and remove column2.
The question
Is it possible to ask SSIS to cast a value and return NULL in case the cast is not allowed instead of throwing an error ?
My environment
I'm using Visual Studio 2005 and Sql Server 2005 on Windows Server 2003.
The general context
Just in case you're curious, here is my use case. I have to store data coming from somewhere in a generic table (key/value structure with history) witch contains some sort of value that can be strings, numbers or dates. The structure is something like this :
table Values {
Id int,
Date datetime, -- for history
Key nvarchar(50) not null,
Value nvarchar(50),
DateValue datetime,
NumberValue numeric(19,9)
}
I want to put the raw value in the Value column and try to put the same value
in the DateValue column when i'm able to cast it to Datetime
in the NumberValue column when i'm able to cast it to a number
Those two typed columns would make all sort of aggregation and manipulation much easier and faster later.
That's it, now you know why i'm asking this strange question.
============
Thanks in advance for your help.
You could also try a Derived Column component and test the value of the potential date/number field or simply cast it and redirect any errors as being the NULL values for these two fields.
(1) If you just simply cast the field every time with a statement like this in the Derived Column component: (DT_DATE)[MYPOTENTIALDATE] - you can redirect the rows that fail this cast and manipulate the data from there.
OR
(2) You can do something like this in the Derived Column component: ISNULL([MYPOTENTIALDATE]) ? '2099-01-01' : (DT_DATE)[MYPOTENTIALDATE]. I generally send through '2099-01-01' when a date is NULL rather than messing with NULL (works better with Cubes, etc).
Of course (2) won't work if the [MYPOTENTIALDATE] field comes through as other things other than a DATETIME or NULL, i.e., sometimes it is a word like "hello".
Those are the options I would explore, good luck!
In dealing with this same sort of thing I found the error handling in SSIS was not specific enough. My approach has been to actually create an errors table, and query a source table where the data is stored as varchar, and log errors to the error table with something like the below. I have one of the below statements for each column, because it was important for me to know which column failed. Then after I log all errors, I do a INSERT where I select those records in SomeInfo that do not have an errors. In your case you could do more advanced things based on the ColumnName in the errors table to insert default values.
INSERT INTO SomeInfoErrors
([SomeInfoId]
,[ColumnName]
,[Message]
,FailedValue)
SELECT
SomeInfoId,
'PeriodStartDate',
'PeriodStartDate must be in the format MM/DD/YYYY',
PeriodStartDate
FROM
SomeInfo
WHERE
ISDATE(PeriodStartDate) = 0 AND [PeriodStartDate] IS NOT NULL;
Tru using a conditional split and have the records where the data is a date go along one path and the other go along a different path where they are updated to nullbefore being inserted.
I have a bunch of NVARCHAR columns which I suspect contain perfectly storable data in VARCHAR columns. However I can't just go and change the columns' type into VARCHAR and hope for the best, I need to do some sort of check.
I want to do the conversion because the data is static (it won't change in the future) and the columns are indexed and would benefit from a smaller (varchar) index compared to the actual (nvarchar) index.
If I simply say
ALTER TABLE TableName ALTER COLUMN columnName VARCHAR(200)
then I won't get an error or a warning. Unicode data will be truncated/lost.
How do I check?
Why not cast there and back to see what data gets lost?
This assumes column is nvarchar(200) to start with
SELECT *
FROM TableName
WHERE columnName <> CAST(CAST(columnName AS varchar(200)) AS nvarchar(200))
Hmm interesting.
I'm not sure you can do this in a SQL query itself. Are you happy to do it in code? If so, you can get all the records, then loop over all the chars in the string and check. But man it's a slow way.
I have a table that looks a bit like this actors(forename, surname, stage_name);
I want to update stage_name to have a default value of
forename." ".surname
So that
insert into actors(forename, surname) values ('Stack', 'Overflow');
would produce the record
'Stack' 'Overflow' 'Stack Overflow'
Is this possible?
Thanks :)
MySQL does not support computed columns or expressions in the DEFAULT option of a column definition.
You can do this in a trigger (MySQL 5.0 or greater required):
CREATE TRIGGER format_stage_name
BEFORE INSERT ON actors
FOR EACH ROW
BEGIN
SET NEW.stage_name = CONCAT(NEW.forename, ' ', NEW.surname);
END
You may also want to create a similar trigger BEFORE UPDATE.
Watch out for NULL in forename and surname, because concat of a NULL with any other string produces a NULL. Use COALESCE() on each column or on the concatenated string as appropriate.
edit: The following example sets stage_name only if it's NULL. Otherwise you can specify the stage_name in your INSERT statement, and it'll be preserved.
CREATE TRIGGER format_stage_name
BEFORE INSERT ON actors
FOR EACH ROW
BEGIN
IF (NEW.stage_name IS NULL) THEN
SET NEW.stage_name = CONCAT(NEW.forename, ' ', NEW.surname);
END IF;
END
According to 10.1.4. Data Type Default Values no, you can't do that. You can only use a constant or CURRENT_TIMESTAMP.
OTOH if you're pretty up-to-date, you could probably use a trigger to accomplish the same thing.
My first thought is if you have the two values in other fields what is the compelling need for redundantly storing them in a third field? It flies in the face of normalization and efficiency.
If you simply want to store the concatenated value then you can simply create a view (or IMSNHO even better a stored procedure) that concatenates the values into a pseudo actor field and perform your reads from the view/sproc instead of the table directly.
If you absolutely must store the concatenated value you could handle this in two ways:
1) Use a stored procedure to do your inserts instead of straight SQL. This way you can receive the values and construct a value for the field you wish to populate then build the insert statement including a concatenated value for the actors field.
2) So I don't draw too many flames, treat this suggestion with kid gloves. Use only as a last resort. You could hack this behavior by adding a trigger to build the value if it is left null. Generally, triggers are not good. They add unseen cost and interactions to fairly simple interactions. You can, though, use the CREATE TRIGGER to update the actors field after a record is inserted or updated. Here is the reference page.
As of MySQL 8.0.13, you can use DEFAULT clause for a column which can be a literal constant or an expression.
If you want to use an expression then, simply enclose the required expression within parentheses.
(concat(forename," ",surname))
There are two ways to accomplish what you are trying to do as per my knowledge:
(important: consider backing up your table first before running below queries)
1- Drop the column "stage_name" all together and create a new one with DEFAULT constraint.
ALTER TABLE actors ADD COLUMN stage_name VARCHAR(20) DEFAULT (concat(forename," ",surname))
2- This will update newer entries in the column "stage_name" but not the old ones.
ALTER TABLE actors alter stage_name set DEFAULT (concat(forename," ",surname));
After that, if you need to update the previous values in the column "stage_name" then simply run:
UPDATE actors SET stage_name=(concat(forename," ",surname));
I believe this should solve your problem.