I'm in the process of setting up a virtual server via Amazon AWS. I followed their tutorial regarding setting up a Linux based virtual server on OS X. Everything goes well until I get to the .ssh pair key file. I download AWS's key as a .pem file. It saves as a .pem.txt file. Which seems odd from what I'm reading. So, I duplicate and change the extension to .pem only.
Then I go to copy the file from downloads to the ~/.ssh folder and get no problems using cp ~/Downloads/FileName.pem ~/.ssh. When I try to use chmod 400 to adjust the security parameters of the folder it returns "Not a directory". When I try to authenticate it fails. I suspect because it has something to do with the chmod 400 code line, but I'm not certain. I also wanted to verify to make sure the file copied into the .ssh folder, but all of the suggestions online about unhiding the hidden folders on a Mac were a no-go.
It is a Linux set up so the user name is the one listed in the tutorial (I already researched this problem). I double check to see if there was a file .ssh and there seems to be. When I type ssh in the terminal I do get feedback, so I'm assuming there is a file there.
Create an ssh folder in your home folder, if one is not present. Then copy the PEM file to that folder. Then change permissions of the PEM file to protect it. Something like this:
mkdir -p ~/.ssh
cp fred.pem.txt ~/.ssh/fred.pem
chmod 400 ~/.ssh/fred.pem
I've done a chmod 777 on my home folder, where the .ssh folder is, and now I cannot login.
I've restored permission on all files but still cannot login. Should I change anything in order to be able to login again.
I get this message: Server refused our key
On other servers I can login properly.
Thank you.
ssh rejects key-based logins if permissions allow other people to tamper with your authorized_keys file. You need to check /, /home, /home/yourname, /home/yourname/.ssh and /home/yourname/.ssh/authorized_keys. All of those must not be group or world writeable.
Typically you want the .ssh directory permissions to be 700 (drwx------) and the public key (.pub file) to be 644 (-rw-r--r--). Your private key (id_rsa) should be 600 (-rw-------).
Stolen from: Permissions on private key in .ssh folder?
I have set up both /home/ec2-user/.ssh/authorized_keys and /root/.ssh/authorized_keys to contain the public key of the private key I intend to use. This has already worked with an Ubuntu instance, but with the ubuntu user.
The issue is, whether I SSH to this instance's public DNS address and use root or ec2-user as the user in PuTTy, I get
Access denied
ec2-user#ec2-54-213-118-179.us-west-2.compute.amazonaws.com's password:
And a prompt for my password.
This all worked with my Ubuntu instance, but doesn't seem to work with my Red Hat instance.
How do I get Red Hat to properly accept my private key and not prompt me for a password?
You can try adding your private key to your running Pageant which is basically the ssh agent that does the handshake for Putty ssh sessions.
There's an example on how to use Pageant in the WinSCP page:
http://winscp.net/eng/docs/ui_pageant
I believe it's related to this bug:
https://forums.aws.amazon.com/thread.jspa?messageID=475492#
If you are using EBS can you try mounting the EBS volume on another instance and examine the problem?
Does the authorized_keys file have 600 permissions?
chmod 600 /home/ec2-user/.ssh/authorized_keys
Does the .ssh directory have 700 permissions?
chmod 700 /home/ec2-user/.ssh/
What does the file /var/log/secure say? That file will usually explain why a SSH login failed.
I am trying to connect to a Centos 6.3 Server using an SSH Key so I can run a script remotely without it asking for a password everytime. I have followed the following instructions:
Login to the server using the normal ssh command and password one time so the server adds your computer to the known hosts
In your computer using cygwin-terminal generate the keys and leave the passphrase blank:ssh-keygen -t rsa
Now set permissions on your private key and ssh folder:chmod 700 ~/.ssh & chmod 600 ~/.ssh/id_rsa
Copy the public key (id_rsa.pub) to the server, login to the server and add the public key to the authorized_keys list: cat id_rsa.pub >> ~/.ssh/authorized_keys
Once you've imported the public key, you can delete it from the server. Set file permissions on the server: chmod 700 ~/.ssh & chmod 600 ~/.ssh/authorized_keys
Retart the ssh daemon on the server: service sshd restart
Test the connection from your computer:ssh root#198.61.220.107
But when I try to ssh to the remote server it is still asking me for the password. The .ssh folder was not created on the server so I had to created myself. Any ideas of what might be happening? did I miss something? Is there another way to set up the keys?
Well it turns out I had stupidly changed the owner of the /root directory when I was setting up the server so since this is where the /.ssh directory was for the user I was trying to loggin with (root) it was denying access to that directory because it belonged to another user.
Dec 10 16:25:49 thyme sshd[9121]: Authentication refused: bad ownership or modes for directory /root
I changed the owner back to root and that did it.
chown root /root
Thanks guys for you help.
Apparently this is a known bug. The suggested solution doesn't actually work, but I found that this would on a CentOS 6.2 system at work:
chmod 600 .ssh/authorized_keys
chmod 700 .ssh
Althogh OP had found a solution, I would like to record my solution of similar problem in the hope that it will be helpful to those who google similar problem and reach this answer.
The reason of my issue is that the .ssh directory in the user's home folder on CentOS server was not set a proper mode after being created by useradd command.
In addition, I need to manually set .ssh folder mode by following commands:
chmod g-w /home/user
chmod 700 /home/user/.ssh
chmod 600 /home/user/.ssh/authorized_keys
Other answers are generic, note that Centos 6 uses selinux. selinux can deny access to the authorised_keys file despite correct permissions and ownership
From the known issues in Centos 6 Release Notes:
Make sure that you setup correctly the selinux context of the public key if you transfer it to a CentOS 6 server with selinux
enabled. Otherwise selinux might forbid access to the
~/.ssh/authorized_keys file and by matter of consequence key
authentication will not work. In order to setup the correct context
you can use:
restorecon -R -v /home/user/.ssh
ssh-copy-id from CentOS 6 is aware of selinux contexts and the previous workaround is not needed.
I'm working to set up Panda on an Amazon EC2 instance.
I set up my account and tools last night and had no problem using SSH to interact with my own personal instance, but right now I'm not being allowed permission into Panda's EC2 instance.
Getting Started with Panda
I'm getting the following error:
# WARNING: UNPROTECTED PRIVATE KEY FILE! #
Permissions 0644 for '~/.ec2/id_rsa-gsg-keypair' are too open.
It is recommended that your private key files are NOT accessible by others.
This private key will be ignored.
I've chmoded my keypair to 600 in order to get into my personal instance last night, and experimented at length setting the permissions to 0 and even generating new key strings, but nothing seems to be working.
Any help at all would be a great help!
Hm, it seems as though unless permissions are set to 777 on the directory, the ec2-run-instances script is unable to find my keyfiles.
I've chmoded my keypair to 600 in order to get into my personal instance last night,
And this is the way it is supposed to be.
From the EC2 documentation we have "If you're using OpenSSH (or any reasonably paranoid SSH client) then you'll probably need to set the permissions of this file so that it's only readable by you." The Panda documentation you link to links to Amazon's documentation but really doesn't convey how important it all is.
The idea is that the key pair files are like passwords and need to be protected. So, the ssh client you are using requires that those files be secured and that only your account can read them.
Setting the directory to 700 really should be enough, but 777 is not going to hurt as long as the files are 600.
Any problems you are having are client side, so be sure to include local OS information with any follow up questions!
Make sure that the directory containing the private key files is set to 700
chmod 700 ~/.ec2
To fix this,
you’ll need to reset the permissions back to default:
sudo chmod 600 ~/.ssh/id_rsa
sudo chmod 600 ~/.ssh/id_rsa.pub
If you are getting another error:
Are you sure you want to continue connecting (yes/no)? yes
Failed to add the host to the list of known hosts (/home/geek/.ssh/known_hosts).
This means that the permissions on that file are also set incorrectly, and can be adjusted with this:
sudo chmod 644 ~/.ssh/known_hosts
Finally, you may need to adjust the directory permissions as well:
sudo chmod 755 ~/.ssh
This should get you back up and running.
I also got the same issue, but I fix it by changing my key file permission to 600.
sudo chmod 600 /path/to/my/key.pem
The private key file should be protected. In my case i have been using the public_key authentication for a long time and i used to set the permission as 600 (rw- --- ---) for private key and 644 (rw- r-- r--) and for the .ssh folder in the home folder you will have 700 permission (rwx --- ---). For setting this go to the user's home folder and run the following command
Set the 700 permission for .ssh folder
chmod 700 .ssh
Set the 600 permission for private key file
chmod 600 .ssh/id_rsa
Set 644 permission for public key file
chmod 644 .ssh/id_rsa.pub
Change the File Permission using chmod command
sudo chmod 700 keyfile.pem
On windows, Try using git bash and use your Linux commands there. Easy approach
chmod 400 *****.pem
ssh -i "******.pem" ubuntu#ec2-11-111-111-111.us-east-2.compute.amazonaws.com
Keep your private key, public key, known_hosts in same directory and try login as below:
ssh -I(small i) "hi.pem" ec2-user#ec2-**-***-**-***.us-west-2.compute.amazonaws.com
Same directory in the sense,
cd /Users/prince/Desktop.
Now type ls command
and you should see
**.pem **.ppk known_hosts
Note: You have to try to login from the same directory or you'll get a permission denied error as it can't find the .pem file from your present directory.
If you want to be able to SSH from any directory, you can add the following to you ~/.ssh/config file...
Host your.server
HostName ec2-user#ec2-**-***-**-***.us-west-2.compute.amazonaws.com
User ec2-user
IdentityFile ~/.ec2/id_rsa-gsg-keypair
IdentitiesOnly yes
Now you can SSH to your server regardless of where the directory is by simply typing ssh your.server (or whatever name you place after "Host").
Just to brief the issue, that pem files permissions are open for every user on machine i.e any one can read and write on that file
On windows it difficult to do chmod the way I found was using a git bash.
I have followed below steps
Remove user permissions
chmod ugo-rwx abc.pem
Add permission only for that user
chmod u+rw
run chmod 400
chmod 400 abc.pem
4.Now try ssh -i for your instance
If you are on a windows machine just copy the .pem file into C drive any folder and
re-run the command.
ssh -i /path/to/keyfile.pem user#some-host
In my case, I put that file in downloads and this actually works.
Or follow this https://99robots.com/how-to-fix-permission-error-ssh-amazon-ec2-instance/
I am thinking about something else, if you are trying to login with a different username that doesn't exist this is the message you will get.
So I assume you may be trying to ssh with ec2-user but I recall recently most of centos AMIs for example are using centos user instead of ec2-user
so if you are
ssh -i file.pem centos#public_IP please tell me you aretrying to ssh with the right user name otherwise this may be a strong reason of you see such error message even with the right permissions on your ~/.ssh/id_rsa or file.pem
The solution is to make it readable only by the owner of the file, i.e. the last two digits of the octal mode representation should be zero (e.g. mode 0400).
OpenSSH checks this in authfile.c, in a function named sshkey_perm_ok:
/*
* if a key owned by the user is accessed, then we check the
* permissions of the file. if the key owned by a different user,
* then we don't care.
*/
if ((st.st_uid == getuid()) && (st.st_mode & 077) != 0) {
error("###########################################################");
error("# WARNING: UNPROTECTED PRIVATE KEY FILE! #");
error("###########################################################");
error("Permissions 0%3.3o for '%s' are too open.",
(u_int)st.st_mode & 0777, filename);
error("It is required that your private key files are NOT accessible by others.");
error("This private key will be ignored.");
return SSH_ERR_KEY_BAD_PERMISSIONS;
}
See the first line after the comment: it does a "bitwise and" against the mode of the file, selecting all bits in the last two octal digits (since 07 is octal for 0b111, where each bit stands for r/w/x, respectively).
sudo chmod 700 ~/.ssh
sudo chmod 600 ~/.ssh/id_rsa
sudo chmod 600 ~/.ssh/id_rsa.pub
The above 3 commands should solve the problem!
Just a note for anyone who stumbles upon this:
If you are trying to SSH with a key that has been shared with you, for example:
ssh -i /path/to/keyfile.pem user#some-host
Where keyfile.pem is the private/public key shared with you and you're using it to connect, make sure you save it into ~/.ssh/ and chmod 777.
Trying to use the file when it was saved elsewhere on my machine was giving the OP's error. Not sure if it is directly related.