I'm trying to create a user entry form which both captures the users input and displays a status update message. The slickest way I think of doing it is to have my modal form for the user entry display over a modeless form. After the user enters their info and clicks OK, the info from the modal form is copied to the modeless form, the modal form is closed and status updates get pushed to the modless form as things change during processing:
Hopefully, with a lot of messing about with positions, it will look relatively seamless. My challenge is getting rid of the frame on my modal form. I've done a lot of searching and it seems to involve completely redrawing the form from base libraries - is there seriously no easier way to do it?
I would not use a 2nd form but just place a simple Frame on top of your form. When you want to show the "modal form", just set the visibility of the frame to True, and when you want to hide it, set it to False - all controls (in your case, the input field and the OK and Cancel button) that are placed on the frame are automatically shown or hidden.
If you have controls outside the "modal form" frame that you don't want to be active at that time, set them to enabled = False. You could handle this with a simple routine within your form.
In this example I have a frame FrameModal painted on top of the form. Note that this frame could be places over other controls.
Option Explicit
Private Sub UserForm_Activate()
showHideModalFrame False
End Sub
Private Sub buttonShowModal_Click()
' Show the "modal" dialog
showHideModalFrame True
End Sub
Private Sub buttonOK_Click()
' Do your stuff here...
Me.tbUpdates = Me.tbUpdates & vbCrLf & Me.tbInput
' Hide the "modal" dialog"
showHideModalFrame False
End Sub
Private Sub showHideModalFrame(show As Boolean)
Me.FrameModal.Visible = show
Me.buttonShowModal.Enabled = Not show
End Sub
Start the form
Click the show button:
Related
I have a userform and some textboxes, I created a DblClick event to open and fill the second form according to the text box data. The problem is when I close Userform4, the whole running forms disappear! Nothing happens when I close userform3. But still, the mouse pointer shows the round status, like it is running a code!
I tried to change the Query_Close event of the second form to hide, but no luck. Can you please help? There is no Cancel button the Second form.
Private Sub txt1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
If Txt1.Locked = True Then
With ThisWorkbook.Sheets("target").Range("a1")
UserForm4.TextBoxJob2 = Txt1.value
UserForm4.TextBoxBadgeNum2 = .Offset(RowNumber, 3)
UserForm4.ComboBoxAC2 = .Offset(RowNumber, 0)
UserForm4.Show
End With
Else
UserForm3.Show
End If
End Sub
Regards,
M
In an access form, I try to make a list field visible when the fokus is on another textfield in which new data should be filled in. The backround is that one should know the last data inputs to create a new one.
As a first step I tried to make the list (liste91) visible when clicking on a button, but I failed using the following code.
Private Sub Befehl97_Click()
Forms!projects!liste91.SetFocus
Me.liste91.visible = True
End Sub
I get error in the line Me.list91
what is wrong?
thank you for your help!
You can't set focus to something not yet visible. Just switch the order:
Private Sub Befehl97_Click()
Me.liste91.visible = True
Me.liste91.SetFocus
End Sub
I have a custom form which is open as Form.ShowDialog()
This form acts as a confirmation form. It asks a question whether you want to accept or decline the previously entered input in ComboBox & TextBox.
If you click OK, the input is saved into Excel File.
If you click Cancel, the input is not saved.
The problem I am having is that:
When you click cancel. The form.ShowDialog() is closed. (Which is fine.)
But when the form.ShowDialog() is open again. It retains the focus on the Cancel Button. So if you try to confirm the entry with "Enter" key, you cancel it instead.
My question is. Why does the Form.ShowDialog() retain the focus on the buttons after closing?
The Form.ShowDialog() has accept button "OK" [tabindex = 1], and cancel button "Cancel" [tabindex = 2] which are set to Enter key, and Esc key.
(To note again)The focus of the buttons remains after closing the form.
The portion of the code using the Dialog:
ElseIf ComboBoxBP.SelectedItem = ComboBoxBP.SelectedItem And TextBoxBP.Text = TextBoxBP.Text Then
form.Label1.Text = ComboBoxBP.SelectedItem
form.Label2.Text = TextBoxBP.Text
form.ShowDialog()
If form.DialogResult = Windows.Forms.DialogResult.Yes Then
SiE()
ElseIf form.DialogResult = Windows.Forms.DialogResult.No Then
LabelBPBot.Text = "Canceled."
End If
End If
When you use .ShowDialog() closing the form does not dispose of it as with a normal form. This is because once a Dialog "closes" it actually just hides so we can get info from it before it actually goes away.
The second issue is that forms are classes (it says so at the top of every one of them:)
Public Class Form1
...
So, instances of them should be created. VB allows Form1.Show or Form1.ShowDialog() to use a "default instance" and it is a shame that it does.
Combine these 2 tidbits and what you have is a case where the form you showed last time is still around in the same state as when you last used it, including the last focused control. You are only using a "fresh copy" of the form the first time, after that, you are just reusing the old instance. Remedy:
Using Dlg As New Form1 ' form1 is the class, dlg is the instance
... do stuff
Dim res As DialogResult = Dlg.ShowDialog()
If res = Windows.Forms.DialogResult.OK Then
'... do stuff
End If
End Using ' dispose of Dlg
Eventually, you will run into similar issues using the default instance of the other forms (LForm.Show). Just Say No to Default Form instances.
In my access database before I was using a list box in the form for having list of items and I had below code for opening new form after right click on each selected item in list box.
Private Sub ItemList_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
Const RIGHTBUTTON = 2
If Button = RIGHTBUTTON Then
DoCmd.OpenForm "frmShortcut_GenerateTask"
DoCmd.MoveSize udtPos.X * mp.TwipsPerPixelX, udtPos.Y * mp.TwipsPerPixelY
End If
End Sub
Now I am using a continuous form instead of list box and I have defined a [isselected) field for selecting each record in continuous form after clicking on that. Now my problem is how I have to write code for right clicking and opening new form.
I used the same code I had used for list box, but it does not work and nothing happened.
Private Sub Form_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
Const RIGHTBUTTON = 2
If Button = RIGHTBUTTON Then
DoCmd.OpenForm "frmShortcut_GenerateTask"
DoCmd.MoveSize udtPos.X * mp.TwipsPerPixelX, udtPos.Y * mp.TwipsPerPixelY
End If
End Sub
Private Sub P_Click()
On Error Resume Next
Me.IsSelected = Not Me.IsSelected
' Save the status
Me.Dirty = False
' Force conditional highlighting
P_ForceHighLight
' Update display in SF_Selected
Me.Parent("SF_Selected").Requery
ActiveControl.SelLength = 0
On Error GoTo 0
End Sub
I recommend either using a DoubleClick event in all of your textboxes and combos, or else putting a small button at one edge of your continuous form that allows the user to open records. Right-click is going to give you problems (so will labels and image controls) because this event doesn't cause (or ensure) that the Form's internal Recordset Bookmark property is actually moved to the record they right-clicked on. In my experience, only buttons, textboxes, and comboboxes will move the Bookmark to the record the user is trying to select.
To Test this, try putting code at the top of your different routines that shows you what record is selected:
MsgBox "RecordID = " & Me!RecordIDField
If you are consistently getting the correct ID, then your problem has to do with how your opening your new form, passing parameters or arguments, etc.
Hoping someone can help me with this. I have two separate but related Forms, one of which contains a WebBrowser control. The user fills out some information on Form 1 and clicks a button with the following code:
If Form2Shown = False Then
Dim memoscreen As New Form2
Form2Ref = memoscreen
memoscreen.show()
Form2Shown = True
memoscreen.TopMost = OptionOnTop
Else
Dim memoscreen As Form2
memoscreen = Form2Ref
memoscreen.TopMost = OptionOnTop
memoscreen.QuickRefresh()
End If
The QuickRefresh sub in Form2 is the method that navigates. It is called both when the form is loaded as well as manually in the code above:
Public Sub QuickRefresh()
Dim HM As Form1
HM = Form1Ref
Me.Text = "retrieving information..."
Me.AxWebBrowser1.Navigate("SomeValidURL")
HM.Focus()
HM.SetHugoFocus()
End Sub
The problem I'm having is that the first time QuickRefresh is called (i.e. when Form2 is loaded) the navigation is successful and the page displays fine. If I then click the button on Form1 again, the page does not change. The Text attribute and window focus does change however, so I know the method is firing.
Some things I've tried/checked:
AllowNavigation is set to True on the WebBrowser control
Have tried looping while the browser is busy while calling Application.DoEvents()
Any suggestions would be appreciated. Thanks.
From your "Internet Options dialog > General Tab > Settings Button > Check for newer version of stored page" change that option to *Every Time I visit the webpage". That setting impacts how the webbrowser control deals with the refreshing.
Use the method refresh.
browser.Navigate("http://www.google.com") : browser.Refresh()