I've got a Qnap TS-431. It's got a flashing red/green status light - so something is wrong and I'm trying to figure out what that is. The fan seems to work if I've just got 1 HDD (but the status remains flashing red/green) and when I added more HDDs, it just keeps rebooting.
Without any HDDs, the fan just runs quietly and the red/green status light keeps flashing.
Can I just replace the fan to fix this issue(s) or are there possibly other issues?
Thanks
I got a similar issue with TS-210. After firmware upgrade QNAP went to reboot and after that flashing red and green every 0.5 sec. Tried removing both HDDs and entering firmware recovering mode - all the same: it just flashes red/light and there is no beep on startup. Have not found a solution yet... ((
reboot your QNAP device, and then try to download/upgrade the firmware again. If it's still failed, try to manually download the fireware file from QNAP website, then upload and update it. Should be ok.
This issue usually was caused by fireware file since 4.O.
Related
My first stack overflow question, here we go.
Last week the computer on which a prototype vision application written in C#/.net was running crashed due to an unreleated reason. this resulted in the need to fresh install windows (windows 10 IOT). after installing windows, halcon 20.11 progress and setting the licenses the application starts, but no output is shown on the smart window control, even tho this worked beforehand?
i have been trying to debug this problem for the last day, but have had no luck, what i have allready tried:
used the remote debugging toe verify that the image is captured and processed and "displayed".
checked the system logs for any warnings, there were none.
Tried one of the example programs the come with Halcon, which also does **not **work.
Ran the application on my development PC, which worked flawlessly as it always did.
Reinstalling Halcon.
does anyone have had any similar experiences and/or any clue how to solve this problem?
problem has been solved. in the end a reset of the bios settings to there default values did the trick. Don't know what they exact cooperative was, but at least it works once again.
I need help fixing my laptop. Yesterday I updated some drivers, rebooted my system , saw a black screen which appeared to be updating bios. I rebooted my laptop thinking I did something wrong.
Now my laptop gets stuck on the Legion screen everytime.I have a macrium backup image on my external but don't think that will work. At this point I just want to get into windows then I can restore my disk image from the external. All my data is backed up.
I have performed a system restore and it still gets stuck at the Legion screen. I've run a chkdsk and it doesn't find any issues. When I tried to run bootrec.exe \Rebuildbcd it doesn't locate a windows installation.
I tried going into safe mode and ultimately get a blue screen saying the following:
We've run into a problem and your device needs to be restarted.
Driver pnp watchdog error
I also got a log error for
srtTrail.txt
I recently switched out my AMD Ryzen 7 3800x for a Ryzen 9 5950x. I also purchase and M.2.
I got these today and installed them on my computer. I have an SSD, a hard Drive and now an M.2
I deleted Fortnite from my hard drive and then installed it on my M.2 the game started up fine it played okay no problems
Then I uninstalled Call of duty modern warfare. I reinstalled it along with its launcher on the new M.2
After installation I went to start the game and check out how it runs with the new stuff.
My problem is that every time I try to start the game it loads for 10 seconds then my computer reboots. I cannot even load into the game because the computer just reboots itself.
I have tried uninstalling and reinstalling again,
I tried running as Administrator,
I attempted to reset the M.2 and see is that was the issue,
I also uninstalled and reinstalled fortnite and it worked perfectly fine.
Does anyone have any tips on what to check or what to do? Everything is up to date. I also reset my bios just in case my old overclock settings for the old CPU had something to do with the crashing of this new one, but nothing happened it kept crashing.
I also attempted to install call of duty vanguard and call of duty cold war. Same thing happened with those as well. I then installed a free to play game and it also happened with that.
I am not sure where to go from here. If anyone has any tips on how to fix this I would be more than pleased. Thank you so much
A react native expo app run within WSL, is the cause of a very annoying bug.
A few minutes after starting the Expo project, the internet on the windows laptop stops working.
I found this command fixes it:
Restart-Service LxssManager - when run from Powershell
However, this happens many times a day and means I have to restart the Expo project every time.
Related to: https://askubuntu.com/questions/1203412/wsl-causing-my-internet-to-not-work
Equally crazily, the fingerprint sensor on my laptop stops working and works again after that command is run.
I suspect the issue is somehow related to a very short (2-5 minute) timeout related to the react native app.
If anyone is able to point in any direction, I would love any help.
Maybe it's Expo or maybe I have some kind of local app code error. But I wouldn't know where to even start or test a bug like that.
Here is a basic run-through of what happens.
Start Expo app in WSL
Work, for an indefinite time
If PC activity pauses for longer than 3 min, the error happens. No internet, no fingerprint sensor.
Run the PowerShell command, restart the app. All is good again.
This is a known bug in WSL. Microsoft has solved this bug in build 18890. https://github.com/MicrosoftDocs/WSL/blob/live/WSL/release-notes.md#build-18890
It happens when a process in WSL creates and closes a large number of non-blocking TCP sockets, and after that some ephemeral TCP ports are leaked, eventually exhausting all ephemeral ports in both the host and the WSL.
You can try upgrading your system to version 2004 or 20H2 and see if this problem persists.
I have an issue with OSMF player: in case you load a page with video, then send system to sleep - after system wakeup playback starts itself. This is valid if you are using f4m file or rtmp stream. Those issues are visible on OSMF demos:
http://www.osmf.org/dev/1.6gm/StrobeMediaPlayback.html - no issues, but here
http://www.osmf.org/dev/1.6gm/debug.html video starts itself after system wakeup.
It sometimes happen if you just open a browser and leave it for 15-30 mins. Commonly - any Mac or Win7, any chrome/firefox...
Changing source to flv allows to get rid of the issue.
Also, if you load page, than start it and pause it - the issue will not reproduce as well.
Control bar behaves also very strange: playback time and scrollbar are updated according to actual playback, but play button (not pause) is presented. on case i push play - video restarts.
Systems: MacOS (10.7.5, build 11G63), Firefox 20, Chrome 26, Flash (11.7.700.169); Windows 7: Firefox 17, Flash (11.6.602.180); our cluents also mentioned they have same issues on Win8 under Internet Explorer, Firefox and Chrome.
I guess that is osmf bug, but no help from adobe (http://forums.adobe.com/message/5246796#5246796), maybe someone has an idea?
Try to compile the 2.0 version of Strobe by downloading the OSMF source
I wouldn't spend a lot of time debugging the issue if that doesn't work. Strobe has not gotten any development support in ages and there is certainly things like this lurking around in the source code.
How to compile it has been answered before on stackoverflow.
I wouldn't spend a lot of time debugging the issue if that doesn't work. Strobe has not gotten any development support in ages and there is certainly things like this lurking around in the source code.