PgSQL insert into select after cast - sql
I have a table with many columns stored as text. These columns have information which i am planning to cast and copy the data into a fresh table with the same column names but with correct data types ( float8 )
I tested the SELECT with CAST operator "::" and it works fine. All the columns are being converted as you can see in the picture
However , when I uncomment the INSERT statement ( above it ) to start writing in the target table, it throws an error. The target table has identical column names and only float8 column types.
The expression from the source table is indeed of type text but i am using the cast operator so why does it not work like before when only running the SELECT statement?
My query below:
INSERT INTO "PM"."new_VM_gcell_evolution_hourly_BSC"
(select
"CR3120:Channel_Assignment_Failures_All_Channels_Busy_or_Channel"::float8,
"DL_Mean_Quality"::float8,
"A312Ca:Failed_Assignments_during_MTC_on_the_A_Interface_Includi"::float8,
"nsp_Urban_TA_4number"::float8,
"A3129C:Failed_Assignments_First_Assignment,_Assignment_Timed_Ou"::float8,
"R3120C:Channel_Assignment_Failures_All_Channels_Busy_or_Channel"::float8,
"TSs_Interf_B5"::float8,
"R3120D:Channel_Assignment_Failures_All_Channels_Busy_or_Channel"::float8,
"HO_Out_Internal_Succ_Rate"::float8,
"CH_Req_Protocol_Undefinednbnumber"::float8,
"UL_Drop_Congnumber"::float8,
"Timing_Adv"::float8,
"DL_Qual"::float8,
"A3100C:Assignment_Requests_TCHH_Only"::float8,
"MS_to_BTS_max_distance"::float8,
"TSs_Interf_B2"::float8,
"UL_Qual"::float8,
"UL_Drop_EDGE_Rate"::float8,
"Avg_BTS_Power_Level_AMR"::float8,
"DL_Drop_N3105number"::float8,
"nsp_Urban_TA_2_R"::float8,
"CH_Req_CallReestabnbnumber"::float8,
"TCH_Drops_cause_Timing_Advance"::float8,
"TCH_Drops_per_Erlang"::float8,
"UL_Drop_Flushnumber"::float8,
"A312F:Number_of_Assignment_Failures_No_Abis_Resource_Available"::float8,
"UL_Drop_GPRS_Rate"::float8,
"nsp_Urban_TA_3number"::float8,
"Call_Drop_rate"::float8,
"DL_Fail_Assingnumber"::float8,
"SDCCH_Radio_Failures"::float8,
"HO_Cmd_UL_Qual"::float8,
"UL/DL_RxQualnumber"::float8,
"UL/DL_RxLevnumber"::float8,
"UL_Fail_EDGE_Rate"::float8,
"Call_Drop_Total"::float8,
"HO_Out_Succ_Rate"::float8,
"Date"::text,
"A3127E:Failed_Assignments_during_Call_Reestablishment_on_the_Um"::float8,
"UL_Drop_N3103number"::float8,
"Configured_TCH"::float8,
"SDCCH_Drop_Call_Rate_only_LU"::float8,
"A312M:Failed_Assignments_Reconnection_to_Old_Channels,_No_Chann"::float8,
"SDCCH_Blocking_Rate"::float8,
"TCH_Drops_cause_DL_FER"::float8,
"TCH_Fail_rate"::float8,
"DL_Drop_Preemnumber"::float8,
"FR_Traffic_totalErl"::float8,
"DL_Congnumber"::float8,
"TCH_Assign_Unsuccnumber"::float8,
"nsp_Urban_TA_0_R"::float8,
"DL_Drop_GPRS_Rate"::float8,
"HR_TraficErl"::float8,
"SDCCH_Cong_Rate"::float8,
"Abis_and_Ater_Interface_Anlysistimes"::float8,
"A3100B:Assignment_Requests_TCHF_Only"::float8,
"AS4300D:Mean_Uplink_Level_during_Radio_Link_Failure_SDCCHdB"::float8,
"nsp_Urban_TA_89number"::float8,
"TCH_Drops_cause_DownQual"::float8,
"SDCCH_Drop_RxLev"::float8,
"Max_UL_Pwr_Duration"::float8,
"nsp_Channel_Req_LUnumber"::float8,
"TCH_HR_Initialy_Config"::float8,
"HO_Inc_Cong_Rate"::float8,
"DL_RxLev_avgdBm"::float8,
"TCH_Assign_Requestsnumber"::float8,
"A312K:Failed_Assignments_First_Assignment,_No_Channel_Available"::float8,
"Call_Drop_TCH_Quality_Rate"::float8,
"AMR_HR_TraficErl"::float8,
"nsp_Urban_TA_67_R"::float8,
"UL_Fail_MSnumber"::float8,
"Time"::text,
"TCH_Drops_cause_UpLevel"::float8,
"AMR_FR_TraficErl"::float8,
"TCH_FR_Initialy_Config"::float8,
"UL_Drop_N3101number"::float8,
"DL_FERnumber"::float8,
"SDCCH_Drop_Call_Rate_wo_LU"::float8,
"DL_Mean_StrengthdB"::float8,
"Call_Drop_Abis"::float8,
"SDCCH_Initialy_Confignumber"::float8,
"Call_Drop_TCH_RxLev_Rate"::float8,
"TA_Meannumber"::float8,
"nsp_Urban_TA_67number"::float8,
"AS3240NA:Average_MS_Power_Level_of_NonAMR_Call"::float8,
"Load"::float8,
"A3129Q:Failed_Assignments_Reconnection_to_Old_Channels,_Timer_E"::float8,
"CH_Request_11_bit"::float8,
"AS4340D:Mean_TA_during_Radio_Link_Failure_SDCCH"::float8,
"S4210A:Uplink_Interference_Indication_Messages_SDCCH"::float8,
"UL_FERnumber"::float8,
"A3129P:Failed_Assignments_Reconnection_to_Old_Channels,_Timer_E"::float8,
"K3003A:Successful_SDCCH_Seizures_Call_Type"::float8,
"CH_Req_LAUnbnumber"::float8,
"SDCCH_Drop_Rate"::float8,
"GBSC"::text,
"CS_CSSR_with_SDCCH_blocks_wo_LU"::float8,
"A312Aa:Failed_Assignments_during_MOC_on_the_A_Interface_Includi"::float8,
"Avg_BTS_Power_Level"::float8,
"R3120A:Channel_Assignment_Failures_All_Channels_Busy_or_Channel"::float8,
"A312S:Failed_Assignments_Signaling_Channel"::float8,
"SD_Fail_MoC"::float8,
"UL_RxQual_avg"::float8,
"Call_Drop_HO"::float8,
"AS4330D:Mean_Downlink_Quality_during_Radio_Link_Failure_SDCCH"::float8,
"CH_Req_Emerg_Callsnbnumber"::float8,
"UL_RxQualnumber"::float8,
"UL_Fail_OtherCausenumber"::float8,
"A312Da:Failed_Assignments_during_Emergency_Call_on_the_A_Interf"::float8,
"UL_Drop_Preemnumber"::float8,
"TCH_Drops_cause_UpDown_FER"::float8,
"AS4320D:Mean_Downlink_Level_during_Radio_Link_Failure_SDCCHdB"::float8,
"A3129O:Failed_Assignments_First_Assignment,_Directed_Retry_Time"::float8,
"Max_DL_Pwr_Duration"::float8,
"UL_Drop_Suspendnumber"::float8,
"TCH_Assign_Congestionnumber"::float8,
"Transmission_Resource_Analysistimes"::float8,
"HO_Out_RxQual_rate"::float8,
"nsp_Urban_TA_1013number"::float8,
"A3129I:Failed_Assignments_Invalid_State"::float8,
"DL_Fail_OtherCausenumber"::float8,
"CR3129:Channel_Assignment_Failures_All_Channels_Busy_or_Channel"::float8,
"HO_Inc_Successnumber"::float8,
"A3129B:Failed_Assignments_First_Assignment,_Terrestrial_Resourc"::float8,
"Trafic_totalErl"::float8,
"nsp_urban_TA_1463all_R"::float8,
"HO_Out_RxQualnumber"::float8,
"DL_RxQualnumber"::float8,
"HO_Inc_Succ_Rate"::float8,
"SDCCH_Fail_Rate"::float8,
"SDCCH_Non_Radio_Drops"::float8,
"nsp_Urban_TA_0number"::float8,
"A3129E:Failed_Assignments_CIC_Unavailable"::float8,
"nsp_CH_Request_PSnumber"::float8,
"TCH_Assign_Unsucc_rate"::float8,
"Call_Drop_Radio"::float8,
"EFR_TraficErl"::float8,
"A312L:Failed_Assignments_Reconnection_to_Old_Channels,_No_Chann"::float8,
"TCH_Drops_cause_DownLevel"::float8,
"nsp_Urban_TA_5number"::float8,
"Abnormal_Terminals_Analysistimes"::float8,
"HO_Inc_Congnumber"::float8,
"CSSR_Rate"::float8,
"M3020C:Call_Drops_on_SDCCHQuality"::float8,
"RH333:Handover_Drop_Rate_of_TCH"::float8,
"UL_Drop_EDGE_Abisnumber"::float8,
"A3129J:Failed_Assignments_Invalid_Message"::float8,
"TCH_Availability"::float8,
"UL_Level"::float8,
"nsp_Urban_TA_4_R"::float8,
"UL_Drop_OtherCausenumber"::float8,
"HR_Traffic_Rate"::float8,
"DL_Level"::float8,
"CH_Request_8_bit"::float8,
"UL_Fail_MS_Assingnumber"::float8,
"DL_Fail_BSC_Commandnumber"::float8,
"A3129R:Failed_Assignments_Reconnection_to_Old_Channels,_Reconne"::float8,
"UL_Fail_BSC_Commandnumber"::float8,
"DL_Drop_Suspendnumber"::float8,
"nsp_urban_TA_1463allnumber"::float8,
"Direct_Retry"::float8,
"nsp_Urban_TA_89_R"::float8,
"CH_Req_PSnbnumber"::float8,
"A3129N:Failed_Assignments_Reconnection_to_Old_Channels,_Terrest"::float8,
"A312A:Failed_Assignments_First_Assignment,_No_Channel_Available"::float8,
"nsp_Urban_TA_2number"::float8,
"DL_RxQual_avg"::float8,
"UL_Mean_StrengthdB"::float8,
"DL_Drop_EDGE_Rate"::float8,
"A3129T:Failed_Assignments_No_Ater_Resource_Available"::float8,
"TSs_Interf_B1"::float8,
"A3129D:Failed_Assignments_Reconnection_to_Old_Channels,_Reconne"::float8,
"nsp_Channel_Req_MOCnumber"::float8,
"UL_Fail_GPRS_Rate"::float8,
"S4210B:Downlink_Interference_Indication_Messages_SDCCH"::float8,
"R3120E:Channel_Assignment_Failures_All_Channels_Busy_or_Channel"::float8,
"HO_Inc_Failnumber"::float8,
"DL_Drop_Flushnumber"::float8,
"S3655:Number_of_configured_TRXs_in_a_cell"::float8,
"TCH_Drops_cause_UpDown_Qual"::float8,
"CR3005:Number_of_Initially_Configured_Channels_Static_PDTCH_Sup"::float8,
"UL/DL_FERnumber"::float8,
"SDCCH_Blocking_"::float8,
"HO_Out_InterRAT_Succ_Rate"::text,
"CM30E:Call_Drops_on_SDCCH_Location_Updating"::float8,
"AS4310D:Mean_Uplink_Quality_during_Radio_Link_Failure_SDCCH"::float8,
"UL_Congnumber"::float8,
"TAnumber"::float8,
"Configured_SDCCH"::float8,
"Othernumber"::float8,
"TCH_Assign_Fail_Radionumber"::float8,
"HO_Out_Internal_Req_Nb"::float8,
"SDCCH_Cong_Nbnumber"::float8,
"UL_Mean_Quality"::float8,
"HO_Out_External_Req_Nb"::float8,
"nsp_Urban_TA_1013_R"::float8,
"SDCCH_Drops_wo_LU"::float8,
"Call_Drop_TCH_Qualitynumber"::float8,
"A3100A:Assignment_Requests_Signaling_Channel_TCH"::float8,
"Better_Cell"::float8,
"Call_Drop_TCH_RxLevnumber"::float8,
"nsp_Channel_Req_MTCnumber"::float8,
"DL_Fail_EDGE_Rate"::float8,
"ZTR104B:Call_Drop_Rate_on_SDCCH_Call_Type"::float8,
"Call_Drop_no_MR"::float8,
"DL_Drop_Congnumber"::float8,
"HO_Inc_InterRAT_reqnumber"::float8,
"TCH_Assign_Cong_rate"::float8,
"HO_Inc_Fail_Rate"::float8,
"TCH_Assign_Fail_sp_ver_unav"::float8,
"HO_Inc_InterRAT_unsucc"::float8,
"A3170A:Number_of_Completed_TCH_Assignments_CSFB_MOC"::float8,
"HO_Inc_Unsucc_Rate"::float8,
"TSs_Interf_B4"::float8,
"A3100K:Assignment_Requests_Signaling_Channel_SDCCH"::float8,
"TCH_Drops_cause_UpDown_Level"::float8,
"SDCCH_Fail_Nbnumber"::float8,
"TCH_Non_Radio_Drops"::float8,
"DL_Fail_MSnumber"::float8,
"HO_Cmd_DL_Qual"::float8,
"DL_Drop_OtherCausenumber"::float8,
"SMS_on_SDCCH"::float8,
"FERnumber"::float8,
"HO_Inc_Reqnumber"::float8,
"nsp_Urban_TA_3_R"::float8,
"M3020D:Call_Drops_on_SDCCHOther"::float8,
"HO_Out_External_Succ_Rate"::float8,
"M3020A:Call_Drops_on_SDCCHTA"::float8,
"TCH_Assign_Fail_Radio_rate"::float8,
"CR3001:Number_of_Initially_Configured_Channels_Static_PDCH"::float8,
"HR_Traffic_totalErl"::float8,
"CH_Req_MTCnbnumber"::float8,
"SDCCH_Drop_RxQual"::float8,
"UL_RxLev_avgdBm"::float8,
"CH_Req_MOCnbnumber"::float8,
"SDCCH_Dropnumber"::float8,
"A3169A:Failed_Assignments_Um_Cause"::float8,
"A3129H:Failed_Assignments_Clear_Commands_Sent_By_MSC"::float8,
"TCH_Radio_Drops"::float8,
"HO_Out_InterRAT_Req_Nb"::float8,
"HO_Inc_InterRAT_succnumber"::float8,
"DL_Drop_Abisnumber"::float8,
"TCH_Drops_cause_UL_FER"::float8,
"UL_RxLevelnumber"::float8,
"nsp_CH_Request_CSnumber"::float8,
"A3170B:Number_of_Completed_TCH_Assignments_CSFB_MTC"::float8,
"A3129F:Failed_Assignments_CIC_Allocated"::float8,
"DL_Fail_GPRS_Rate"::float8,
"M3020B:Call_Drops_on_SDCCHReceived_Level"::float8,
"nsp_Urban_TA_1number"::float8,
"SDCCH_Availability"::float8,
"Call_Drop_forced_HO"::float8,
"SDCCH_Drop_Others"::float8,
"Call_Drop_Equip."::float8,
"CH_Req_PS"::float8,
"SDCCH_Drop_Call_Rate"::float8,
"TCH_Drops_cause_UpQual"::float8,
"CH_Req_LMU_Reservednbnumber"::float8,
"DL_RxLevnumber"::float8,
"nsp_Urban_TA_1_R"::float8,
"A312Ea:Failed_Assignments_during_Call_Reestablishment_on_the_A_"::float8,
"TSs_Interf_B3"::float8,
"SDCCH_Drop_TimingAdvance"::float8,
"Avg_BTS_Power_Level_NAMR"::float8,
"TCH_Drops_cause_Other"::float8,
"FR_TraficErl"::float8,
"Avg_MS_Power_Level"::float8,
"HO_Outgoing_Requestsnumber"::float8,
"A3129G:Failed_Assignments_A_Interface_Failure"::float8,
"CH_Req_LAU"::float8,
"nsp_Urban_TA_5_R"::float8,
"HO_Inc_Unsuccessnumber"::float8,
"AS3240A:Average_MS_Power_Level_of_AMR_Call"::float8
from "PM"."VM_gcell_evolution_hourly_BSC_recovered")
It says "column is of type double but expression is of type text" so what's really happening is that it's trying to insert one of the expressions where you cast to ::text into a column that is of type double.
If the problem was converting from text to double, you'd get a different message. Besides, the SELECT worked fine, which means it didn't encounter any text data that it couldn't convert to double.
Since you don't specify the target table columns in your INSERT, and you have so many of them, most likely you missed a column or got the order wrong.
Honestly if the table has 270 columns and they have the same name in the source and destination tables, you should really generate the query using something like python from a list of columns, that will be faster than proofreading the 270 lines...
Related
extract values inside an array column in amazon athena
I have a table in athena aws where the column 'metadata_stopinfo' has the structure that you can see in the image.
I am trying to extract values that are inside that array, however when I try
SELECT
"json_extract_scalar"(metadata_stopinfo, '$.city')
FROM "table"
I have the following problem
SYNTAX_ERROR: line 2:5: Unexpected parameters (array(row("address" row("addressline" varchar,"city" varchar,"countrycode" varchar,"countrycodeoriginal" varchar,"state" varchar,"zipcode" varchar),"carrierreference" varchar,"contacts" array(row("contacttype" varchar,"email" varchar,"fax" varchar,"mobilephone" varchar,"name" varchar,"officephone" varchar,"userid" varchar)),"containerinfo" array(row("containerid" varchar,"containeridtype" varchar,"equipmentcode" varchar,"equipmenttype" varchar)),"conveyancelinenumber" varchar,"conveyancetype" varchar,"conveyancetypeoriginal" varchar,"dateinfo" row("arrivalestimateddate" varchar,"arrivalestimateddateend" varchar,"arrivalestimatedendoffset" varchar,"arrivalestimatedoffset" varchar,"arrivalrequesteddate" varchar,"deliveryestimateddate" varchar,"deliveryestimateddateend" varchar,"deliveryestimatedendoffset" varchar,"deliveryestimatedoffset" varchar,"deliveryrequesteddate" varchar,"deliveryrequesteddateend" varchar,"deliveryrequestedendoffset" varchar,"deliveryrequestedoffset" varchar,"departureestimateddate" varchar,"departureestimateddateend" varchar,"departureestimatedendoffset" varchar,"departureestimatedoffset" varchar,"departurerequesteddate" varchar,"pickuprequesteddate" varchar,"pickuprequesteddateend" varchar,"pickuprequestedendoffset" varchar,"pickuprequestedoffset" varchar,"pickupestimateddate" varchar,"pickupestimateddateend" varchar,"pickupestimatedendoffset" varchar,"pickupestimatedoffset" varchar),"deliverynotenumber" varchar,"instructions" array(row("customerspecificsubtype" varchar,"header" boolean,"instructionsubtype" varchar,"instructiontype" varchar,"text" varchar)),"locationid" varchar,"partnercarrieraddress" row("addressline" varchar,"city" varchar,"countrycode" varchar,"countrycodeoriginal" varchar,"state" varchar,"zipcode" varchar),"partnercarriercontacts" array(row("contacttype" varchar,"email" varchar,"fax" varchar,"name" varchar,"officephone" varchar)),"partnercarrierid" varchar,"partnercarriername" varchar,"partnerid" varchar,"partnername" varchar,"partnertimezone" varchar,"partnertype" varchar,"productquantity" row("number" double,"originalunitofmeasure" varchar,"quantitytype" varchar,"unitofmeasure" varchar),"sequencenumber" bigint,"shipmentidentifier" varchar,"stoptype" varchar,"transportinfo" row("description" varchar,"transportcode" varchar,"transportoriginalcode" varchar),"vesselinfo" row("lloydsnumber" varchar,"shipsradiocallnumber" varchar,"vesselname" varchar,"vesselnumber" varchar,"voyagetripnumber" varchar))), varchar(6)) for function json_extract_scalar. Expected: json_extract_scalar(varchar(x), JsonPath) , json_extract_scalar(json, JsonPath)
My question is, how can i extract values inside de column ?
json_extract_scalar unsurprisingly works with json (note that even if yur data was in json format, json_extract_scalar(metadata_stopinfo, '$.city') still would not have worked cause your data is an array), while your column contains array's of row's, so you need to work with it correspondingly. For example you can use indexes to access elements in array (in presto array indexes start from 1): SELECT metadata_stopinfo[1] r FROM "table" And then access the fields: The fields may be of any SQL type, and are accessed with field reference operator . SELECT metadata_stopinfo[1].city city FROM "table" Also you can flatten the array with unnest: SELECT r.city FROM "table", unnest(metadata_stopinfo) as t(r)
How to resolve this sql error of schema_of_json
I need to find out the schema of a given JSON file, I see sql has schema_of_json function
and something like this works flawlessly
> SELECT schema_of_json('[{"col":0}]');
ARRAY<STRUCT<`col`: BIGINT>>
But if I query for my table name, it gives me the following error
>SELECT schema_of_json(Transaction) as json_data from table_name;
Error in SQL statement: AnalysisException: cannot resolve 'schemaofjson(`Transaction`)' due to data type mismatch: The input json should be a string literal and not null; however, got `Transaction`.; line 1 pos 7;
The Transaction is one of the columns in my table and after checking it manually I can attest that it is of String type(json).
The SQL statement has it to give me the schema of the JSON, how to do it?
after looking further into the documentation that it is clear that the word foldable means that of the static one, and a column from a table JSON won't work
for minimal reroducible example here you go:
SELECT schema_of_json(CAST('{ "a": "b" }' AS STRING))
As soon as the cast is introduced in the above statement, the schema_of_json will fail......... It needs a static JSON as it's input
Regex comparison in Oracle between 2 varchar columns (from different tables)
I am trying to find a way to capture relevant errors from oracle alertlog. I have one table (ORA_BLACKLIST) with column values as below (these are the values which I want to ignore from V$DIAG_ALERT_EXT) Below are sample data in ORA_BLACKLIST table. This table can grow based on additional error to ignore from alertlog. ORA-07445%[kkqctdrvJPPD ORA-07445%[kxsPurgeCursor ORA-01013% ORA-27037% ORA-01110 ORA-2154 V$DIAG_ALERT_EXT contains a MESSAGE_TEXT column which contains sample text like below. ORA-01013: user requested cancel of current operation ORA-07445: exception encountered: core dump [kxtogboh()+22] [SIGSEGV] [ADDR:0x87] [PC:0x12292A56] ORA-07445: exception encountered: core dump [java_util_HashMap__get()] [SIGSEGV] ORA-00600: internal error code arguments: [qercoRopRowsets:anumrows] I want to write a query something like below to ignore the black listed errors and only capture relevant info like below. select dae.instance_id, dae.container_name, err_count, dae.message_level from ORA_BLACKLIST ob, V$DIAG_ALERT_EXT dae where group by .....; Can someone suggest a way or sample code to achieve it? I should have provided the exact contents of blacklist table. It currently contains some regex (perl) and I want to convert it to oracle like regex and compare with v$diag_alert_ext message_text column. Below are sample perl regex in my blacklist table. ORA-0(,|$| ) ORA-48913 ORA-00060 ORA-609(,|$| ) ORA-65011 ORA-65020 ORA-31(,|$| ) ORA-7452 ORA-959(,|$| ) ORA-3136(,|)|$| ) ORA-07445.[kkqctdrvJPPD ORA-07445.[kxsPurgeCursor –
Your blacklist table looks like like patterns, not regular expressions. You can write a query like this: select dae.* -- or whatever columns you want from V$DIAG_ALERT_EXT dae where not exists (select 1 from ORA_BLACKLIST ob where dae.message_text like ob.<column name> ); This will not have particularly good performance if the tables are large.
SQL - Error converting data type varchar to numeric
I have data in a table that has decimals and stored as a varchar type data. I need to place that data into another table with column that is data type of decimal(18,5) I get error: Error converting data type varchar to numeric The problem is with this Share column Query I have is SELECT IFS.Bin,CFL.CUSIP,IFS.[FROM], --IFS.Shares --SUM(isnull(cast(IFS.Shares as money),0)) --CAST(isnull(IFS.Shares,0) AS VARCHAR(30)) Shares = Convert( DECIMAL(18,5), CASE WHEN IFS.Shares LIKE '%[^0-9]%' THEN IFS.Shares --NULL ELSE IFS.Shares END) FROM mfclearing.ICE.ImportFileStaging IFS INNER JOIN mfclearing.Production.ClearingFundList CFL ON IFS.[From] = CFL.NasdaqSymbol So if I try to only use IFS.Shares that doesn't work, I was trying some other SUM and CAST , but the last thing is that I'm trying to do is that Shares = Convert ..... Should not be too relevant to this, but I do want to do an insert into and so I do have an insert statement right above that Select statement INSERT INTO [InterclassExchangeBatchDetails](Bin,FromCusip,FromSymbol,Shares) The data that I'm working with for reference that is causing the problem, here is a sample of it 521.92100000000005 9906.8510000000006 542.529 1043.8409999999999 3129.0839999999998 5285.4120000000003 104.367 126.98 332.02499999999998 530.12300000000005 575.57799999999997 895.56899999999996 1052.9349999999999 1167.0619999999999 1180.9939999999999 1630.8030000000001 247.232 2136.2040000000002 667.95500000000004 947.78599999999994 148.36000000000001 223.994 238.42699999999999 255.25700000000001 257.56999999999999 259.70600000000002 317.90199999999999 317.90199999999999 317.90199999999999 360.59199999999998 366.84399999999999 374.35000000000002 376.90199999999999 393.11500000000001 397.37200000000001 399.47699999999998 449.72699999999998 463.60899999999998 474.68599999999998 488.11599999999999 491.245 504.67399999999998 509.97899999999998 530.47199999999998 535.93299999999999 537.69799999999998 549.40599999999995 552.41700000000003 581.32600000000002 608.05100000000004
Just use TRY_CONVERT(): Shares = TRY_CONVERT(DECIMAL(18,5), IFS.Shares)
MS Access query produces invalid procedure call
My query in access works fine if i only use the below query with a select statement. As soon as it becomes an append query it produces an "invalid procedure call" error. I have narrowed down the offending columns as being "Publ" and "PublLong". Both are long text strings. If I remove these two columns the query updates without an error. Here is a sample data point found in the [Bezeichung] Field: publications.bank.com/publ-dl-ch/pdf/WhatsUp_20181113_en.pdf I checked the table that it is being inserted to and the data types are the same nor did i see any other setting that would block the insertion. How can i get it to work? INSERT INTO tbl_MatomoRaw ( DownloadDate, IntExt, Publ, PublLong, PublDate, [Language], Download_Visits, PublMonth ) SELECT Date() AS DownloadDate, Left([Bezeichnung],InStr([Bezeichnung],".")-1) AS IntExt, Nz(Mid([Bezeichnung],InStrRev([Bezeichnung],"/")+1,InStr([Bezeichnung],"_")- InStrRev([Bezeichnung],"/")-1),"") AS Publ, Mid([Bezeichnung],InStrRev([Bezeichnung],"/")+1,InStrRev([Bezeichnung],"_")- InStrRev([Bezeichnung],"/")-1) AS PublLong, Mid([Bezeichnung],InStr([Bezeichnung],"_")+1,8) AS PublDate, Mid([Bezeichnung],Len([Bezeichnung])-5,2) AS [Language], xlsx_Output.[Eindeutige Downloads] AS Download_Visits, Mid([Bezeichnung],InStr([Bezeichnung],"_")+1,6) AS PublMonth FROM xlsx_Output WHERE (((Nz(Mid([Bezeichnung],InStrRev([Bezeichnung],"/")+1,InStr([Bezeichnung],"_")- InStrRev([Bezeichnung],"/")-1),"")) Not Like "#Func!"));
#Func! indicates one of your functions is causing an error. Your query uses multiple functions that run into trouble when your input doesn't meet that format, pre-filter instead of filtering on an error, since you can't filter on an error when appending: INSERT INTO tbl_MatomoRaw ( DownloadDate, IntExt, Publ, PublLong, PublDate, [Language], Download_Visits, PublMonth ) SELECT Date() AS DownloadDate, Left([Bezeichnung],InStr([Bezeichnung],".")-1) AS IntExt, Nz(Mid([Bezeichnung],InStrRev([Bezeichnung],"/")+1,InStr([Bezeichnung],"_")- InStrRev([Bezeichnung],"/")-1),"") AS Publ, Mid([Bezeichnung],InStrRev([Bezeichnung],"/")+1,InStrRev([Bezeichnung],"_")- InStrRev([Bezeichnung],"/")-1) AS PublLong, Mid([Bezeichnung],InStr([Bezeichnung],"_")+1,8) AS PublDate, Mid([Bezeichnung],Len([Bezeichnung])-5,2) AS [Language], [Eindeutige Downloads] AS Download_Visits, Mid([Bezeichnung],InStr([Bezeichnung],"_")+1,6) AS PublMonth FROM (SELECT * FROM xlsx_Output WHERE Len(Bezeichnung) > 5 AND Bezeichnung LIKE "*?.?*" AND Bezeichnung LIKE "*_????????*" AND Bezeichnung LIKE "*?\?*") WHERE (((Nz(Mid([Bezeichnung],InStrRev([Bezeichnung],"/")+1,InStr([Bezeichnung],"_")- InStrRev([Bezeichnung],"/")-1),"")) Not Like "#Func!")); Since I don't know exactly where the errors occur, I can't write up a proper filter to identify them, but judging by your query they should include a slash and a symbol after that slash, an underscore and at least 8 symbols after that underscore, and a dot with at least one symbol before and after the dot.