In Netbeans 12.2 on Ubuntu 18.04 (using that snap install), for my C++ plugin I have that first image. When I try to create a new project I get that second image. That is some kind of a lightweight version that does not do your makefiles for you. If I try to open an existing C++ project it just never IDs any project file or folder as the right one. And notice that this version does not include a "Create from source code".
Does anyone know how I can install the "real" c++ plugin? I've looked in a lot of tutorials but they all say it should be there under Available Plugins, but it is not there.
This comes very late but it seems that Netbeans 12 lacks some components for this.
Therefore you must enable Netbeans 8.2 Plugin Portal from Plugins Settings.
Then deactivate the C/C++ and then force updates from Updates -> Check for Updates. Restart IDE and install 8.2 C/C++ plugin.
Note: I have lead into this problem now because unpack2000 is no more present.
The validation of downloaded plugins cannot be completed, cause: NBM ../.netbeans/12.4/update/download/org-netbeans-modules-cnd-kit.nbm needs unpack200 to process following entries:
netbeans/modules/locale/org-netbeans-modules-cnd-kit_ja.jar.pack.gz
netbeans/modules/locale/org-netbeans-modules-cnd-kit_pt_BR.jar.pack.gz
netbeans/modules/locale/org-netbeans-modules-cnd-kit_ru.jar.pack.gz
netbeans/modules/locale/org-netbeans-modules-cnd-kit_zh_CN.jar.pack.gz
netbeans/modules/org-netbeans-modules-cnd-kit.jar.pack.gz
This can be resolved by installing jre-11 (if it is not present already. I have it on Opensuse Thubleweed amogst with jre-16).
So then you just start netbeans from terminal with:
$ netbeans --jdkhome "/usr/lib64/jvm/jre-11"
...and then install blugin, and when it is ready close netbeans and start it normally again.
Just wanted to report that the answer from Devspain also works with Netbeans 14, in Ubuntu 22.04.
Related
Before you write me off, please consider that neither of these are answers to my question:
How to setup SDK in IntelliJ IDEA?
How do I change the IntelliJ IDEA default JDK?
In IntelliJ IDEA 2017.2.6, attempting to add JDK9 as an SDK passes but does not work as the classpaths end up empty. Steps to reproduce:
Open 'Add new SDK dialog'
(go to Project Settings > Project > Project SDK > New > JDK)
Select JDK 9
Passes, but if you look under SDK > JDK9 classpaths are empty and your code errors out due to base classes not being found. See image:
In IntelliJ IDEA 2017.3 EAP you get an error about JDK classes not being found. See images below:
Open 'Add new SDK dialog'
(go to Project Settings > Project > Project SDK > New > JDK)
Select JDK 9
Should pass, but produces error popup
Command line compilation of HelloWorld example with jdk9 works as expected.
EDIT: Found an almost-duplicate: Intellij IDEA 2017.2 can't add openjk 9 on Linux Mint 18. Key differences:
Linux version: they're using Mint 18, and I'm using Debian Stretch.
OpenJDK is the latest from the repo at the moment of writing: 9~b181-4~bpo9+1. Even though is the same version, it still does not work in my case.
EDIT: Another possible duplicate: intellij idea does not see java 9 standard classes
I did not understand the answer from the comments though. Tried setting different names for JDK (9 and 1.9) but it still did not show modules instead of classpaths and classpaths remained empty.
Current debian binary package openjdk-9-jre-headless 9~b181-4 contains incorrectly compiled lib/jrt-fs.jar file.
There are 2 filed issues separately on both idea youtrack and also ubuntu launchpad.
As it is indicated here:
Probable reason:
Classes in lib/jrt-fs.jar were compiled by Java 9 with options "-source 8"/"target 8". They should be compiled with "--release 8" option instead (or by Java 8)
A temporary workaround may be replacing /usr/lib/jvm/java-9-openjdk-amd64/lib/jrt-fs.jar with the one from Oracle JDK.
You may also try to recompile the openjdk-9 source using the advised option "--release 8".
Anyway I advice to vote up this issue on the above link to attract more attention by dev team.
Use Oracle Java instead of OpenJDK for now. You can pull that in through WebUpd8's repository.
sudo add-apt-repository ppa:webupd8team/java &&
sudo apt-get update &&
sudo apt-get install oracle-java9-installer
It doesn't look like this is going to work with OpenJDK, so if you want to play with the latest and greatest Java, this is going to be the way to do it for now. Otherwise, from what I've seen, you've done this correctly and once this gets actually fixed, it will work just fine.
Summary: The pkg-bootstrap.jar and related files are missing from the latest GlassFish 4.1.2 and this prevents the updatetool from running. What is the proper way to install and run updatetool on Windows 10?
Detail: I was working with the Java EE 7 tutorial and downloaded the Java EE 7 SDK Update 3 (not Web Profile) which is based on GlassFish Open Source Edition 4.1.2. I ran into a problem running the updatetool on Windows 10. When run, it gives the option to install itself but the installation fails. It looks like the update tool uses the pkg tool, and that uses a pkg-bootstrap to install itself the first time. However, this is no longer included in GlassFish 4.1.2. When the updatetool is run, it produces the following errors:
C:\glassfish4\bin>updatetool
The software needed for this command (updatetool) is not installed.
If you choose to install Update Tool, your system will be automatically
configured to periodically check for software updates. If you would like
to configure the tool to not check for updates, you can override the
default behavior via the tool's Preferences facility.
When this tool interacts with package repositories, some system information
such as your system's IP address and operating system type and version
is sent to the repository server. For more information please see:
http://wikis.oracle.com/display/updatecenter/UsageMetricsUC2
Once installation is complete you may re-run this command.
Would you like to install Update Tool now (y/n): y
C:\glassfish4>"C:\Program Files\Java\jdk1.8.0_121\bin\java" -Dimage.path="C:\glassfish4\bin\\.." -jar "C:\glassfish4\bin\\..\pkg/lib/pkg-client.jar" refresh
Error: Unable to access jarfile C:\glassfish4\bin\\..\pkg/lib/pkg-client.jar
C:\glassfish4>"C:\Program Files\Java\jdk1.8.0_121\bin\java" -Dimage.path="C:\glassfish4\bin\\.." -jar "C:\glassfish4\bin\\..\pkg/lib/pkg-bootstrap.jar" "C:\Users\[userid]\AppData\Local\Temp\pkg-bootstrap21687.props"
Error: Unable to access jarfile C:\glassfish4\bin\\..\pkg/lib/pkg-bootstrap.jar
C:\glassfish4\bin\pkg does not exist in either the latest Java EE 7 SDK Update 3 or the latest GlassFish 4.1.2. Some research on the nightly builds shows that the directory trees glassfish4/.org.opensolaris,pkg and glassfish4/pkg were removed between builds glassfish-4.1.2-b03-02_25_2017 and glassfish-4.1.2-b03-03_07_2017. I can't find anything that explains why they were removed or an alternate way to install the updatetool. My work around was to copy the two trees from glassfish-4.1.2-b03-02_25_2017 into c:\glassfish4 (from the Java EE 7 SDK Update 3) and that seems to work. But, I figure that if this was removed, there was a good reason for it, and I shouldn't be hacking it.
If there was a separate installation step for the package tool, I missed it. What is the proper way to get the updatetool to run on GlassFish 4.1.2?
I have jdk1.8.0_121 and jre1.8.0_121.
Thanks for your help.
I had the same problem as DevDevDev.
I went to the link in his post:
http://download.oracle.com/glassfish/4.1.2/nightly/index.html
Downloaded the archive:
glassfish-4.1.2-b03-02_25_2017
http://download.oracle.com/glassfish/4.1.2/nightly/glassfish-4.1.2-b03-02_25_2017.zip
Extracted the missing folders into my glassfish directory:
/glassfish4/pkg
/glassfish4/.org.opensolaris,pkg
As DevDevDev I have questions about why it was removed but it works for me...for now.... Hope it helps someone else. Thank you DevDevDev I would not have solved this without your post!
I was working with Java SE. Then I needed to work with JAX-WS, so I went into the same website as you.
Basically, it says that you have to:
Download the package (a compressed file with a folder called glassfish4)
Unzip the downloaded file (does not specify where)
voilá
It did not work for me, so I kept searching and I found this: https://forums.netbeans.org/post-91328.html
You just need to download this update from netbeans plugin Manager:
"Java EE Base"
Good luck!
I got the same problem too. It seems that glassfish 4.1 did not integrate the Update Tool, so as doc of oracle suggests, we'd better install SDK 6(glassfish 3). Here is Java EE 6 SDK Update 3, note that the version provided here is with JDK 7. If you already installed JDK in your windows 10, you may ignore it.
When you finish downloading the .exe file, you should not install SDK by double-click the .exe file. Instead, you should run below command:
java_ee_sdk-6u3-jdk7-windows-x64.exe -j [JRE-Home]
note, command here is the name of your .exe file and it needs console arg of JRE Home, mine command is as below:
java_ee_sdk-6u3-jdk7-windows-x64.exe -j D:\JDK\jre
It seems that unzipping the file using Windows explorer's zip support doesn't work properly. If you instead do as described in the README and run:
jar xvf glassfish-4.1.zip
The archive is extracted properly and all the needed pkg files are there.
What files do you need? I had the save problem I was looking for the files of tutorial. Finally I found them here: ..../glassfish4/docs/javaee-tutorial/
Using the marketplace I installed a plugin (additional axis 2 tools) on a new Luna EE install.
I uninstalled it via the market place, and after a reboot it was still there. Tried this many times.
So I deleted the file manually from the plugins folder and the option was gone.
However, I want to reinstall it (I originally uninstalled it because the dialog kept containing the wrong information and stopping me from building aar file), but when I go to the marketplace it only gives me an option to 'uninstall'.
Ignoring how this is a bit crap, how do I remove this plugin so I can install it again?
I tried downloading the 1.6.2 jar direct from apache but it just gives me an error saying invalid jar repository.
(I know I can generate the service file/aar manually, but I want to do it this way).
thanks.
Go to Help, Instillation Details and try to remove it from installed software and then try to install it again.This works for me whenever I've to uninstall any software.
Okay, so here is the deal:
I was trying to install the java jdk so i can work on an android project in eclipse on this computer, but there are just so many different installations of java its impossible, for me atleast, to figure out exactly which one i needed. so i went with "JDK 7u3 with Java EE". But this also installed this GlassFish stuff, which i have no idea what is or what it does, and when i was going through all the eclipse stuff i decided to just keep my other computer for work. so i removed eclipsed and the stuff needed for that, and i removed the java stuff, but then when i try to uninstall the GlassFish, it can't, and gives me the error:
"Could not find the required version of the Java(TM) 2 Runtime Environment in '(null)'."
I have now been trying for several hours, scouring the web to figure out some way of removing this, install all kinds of java stuff, removing it again, reinstalling, but nothing works. I don't really care what GlassFish is or what it does, i just want it, and all the java stuff gone for good.
How can i accomplish this?
under Microsoft Windows 7 (or others), use that command line :
uninstall.exe -j "%JAVA_HOME%"
You installed first jdk1.6 then uninstalled it. In this time, you install glassfish3 and glassfish wrote set AS_JAVA=C:\Program Files (x86)\Java\jdk1.6.0_x in its config file but you use now jdk1.7
Open C:\glassfishv3\glassfish\config\asenv.bat
Search 'set AS_JAVA'
Change its value to your current jdk path ( eg. C:\Progra¨1\Java\jdk1.7.xx )
Try to uninstall again.
You can run the uninstall specifying the jvm to use:
try this following command to uninstall
C:\glassfish3\uninstall.exe -j <java home dir>
as stated in the error message. it worked for me.
GlassFish is a Java EE application server developed in open source, so you can create server-side services that your android apps can consume. Of course, is sounds like you are not really interested in this :-)
The Java EE SDK install/uninstall instructions are here: http://java.sun.com/javaee/sdk/javaee6sdk_install.jsp
What you probably want to download, the Java 7 SDK (JDK 7) is here: http://www.oracle.com/technetwork/java/javase/downloads/index.html
Make sure you download the JDK (Java Developer Kit) and not the JRE (Java Runtime Environment).
Hope this helps.
These didn't work for me running java 1.6.0_24 in Windows 7:
I tried modifying the asenv.bat file that glassfish uses to find the jre to point to my jre.
I tried manually putting it in as in C:\glassfish3\uninstall.exe -j . This was per the official Oracle documentation.
The only thing that worked was to use the original path and move the bin and lib folders from my java installation to the directory that the error dialog
specified. Then the Glassfish uninstall started up and completed with no problems.
I was able to uninstall the glasshfish server by using the below command
uninstall.exe -javahome "%JAVA_HOME%"
Note: We need to set the JAVA_HOME in the environment variable and classpath variable
I've tried multiple times to install the Zen Coding plugin for Gedit in Ubuntu 11.10. (I have all the latest updates installed.) I know I'm doing it correctly because I've done it on other installations with no problem but for some reason it doesn't even show up in the plugins list. Anyone else having this problem or know how to fix it? Thanks!
I found that for GEdit 3 this plugin works : https://github.com/mtrovo/zen-coding-gedit3.
Ubuntu 11.10 ships with Gedit 3, 11.04 had Gedit version 2. Plugins written for version 2 will (supposedly) not work with the newer version, as it uses GTK3, while Gedit2 used GTK2.
Some of the plugin changes are:
New folder: ~/.local/share/gedit/plugins
.gedit-plugin extension should be named .plugin
[Gedit Plugin] header should be [Plugin]
IAge=2 should be IAge=3
All plugins must have a .plugin file along side it.
Here's a blog post I found that covers making plugins for Gedit 3. And here's a relevant question on AskUbuntu.