I setup a clean Debian 10 vps, launch this setup script
https://raw.githubusercontent.com/Yenthe666/InstallScript/14.0/odoo_install_debian.sh
and all seems is correctly installed
I can't get the /odoo/custom/addons folder to work
Odoo Enterprise
This is the /etc/odoo-server.conf
[options]
; This is the password that allows database operations:
admin_passwd = xxxxxxxxxx
xmlrpc_port = 8069
logfile = /var/log/odoo/odoo-server.log
addons_path = /odoo/enterprise/addons,/odoo/odoo-server/addons,/odoo/custom/addons
proxy_mode = True
then
service odoo-server restart
checking on the log the directory is found
2020-11-18 09:32:46,144 4683 INFO ? odoo: addons paths: ['/odoo/odoo-server/odoo/addons',
'/odoo/.local/share/Odoo/addons/14.0', '/odoo/enterprise/addons', '/odoo/odoo-server/addons',
'/odoo/custom/addons']
All modules inside /odoo/custom/addons have correct permissions "odoo:odoo" and 755
Activated developer mode with assets
In apps menu clicked on update module list
New addon doesn't show in App list... :(
Same addon here /odoo/odoo-server/addons works
Before all things, change permissions using:
sudo chmod -R odoo:odoo /added_path_of_addons/
Stop server using:
sudo /etc/init.d/odoo-server stop
Then restart it again:
sudo /etc/init.d/odoo-server start
pic1:
enter image description here
pic1 stop and start servise odoo after check pic2
odoo---server---odoo.conf---addons_path:Give the address your module want
enter image description here
Related
Warning: ini_set(): Session save handler "redis" cannot be found on my page where I have use the code as shown below
ini_set('session.save_handler', 'redis');
This code works fine if the PHP version is 7.4 but when I upgraded PHP to PHP8 or PHP8.1 it stops working and gives me a warning "Warning: ini_set(): Session save handler "redis" cannot be found"
Also when I run the phpinfo() I do not find any PHP extension for Redis which is visible in case of PHP7.4
It looks like redis extension isn't available at your php modules. Check by using this command:
php -m | grep redis
So if it's empty, you need to install and configure it properly:
Visit this link to check how to install php redis extension.
Open your php.ini file (php --ini to check location)
Check for extension_dir property and make sure it points to correct extensions directory.
Add this code below - extension=redis.so
Restart your PHP-FPM service
Now try it once more:
php -m | grep redis
Should return redis now. Now ini_set command should work!
I need to install Odoo V12 in my laptop and I having some problems with it.
When I run the ./odoo-bin command for running the server this is the log.
It seems okey but when I run http://localhost:8069/ is not working.
[options]
; This is the password that allows database operations:
; admin_passwd = admin
db_host = localhost
db_port = 5432
db_user = odoo
db_password = False
logfile = /var/log/odoo/odoo-server.log
addons_path = /opt/odoo/core/addons,/opt/odoo/core/odoo/addons
xmlrpc_port = 8269
Postgres user list:
Anyone knows what's happening?
Thanks for reading!
Check if db is working and permission on config file.
sudo chown odoo: /etc/odoo-server.conf
sudo chmod 640 /etc/odoo-server.conf
actually problem is with process's pid.
You have to kill process which is running on localhost:8069 port.
fire this commands:-
ps aux|grep odoo
Their find your command like (ODOO_FOLDER_PATH/odoo-bin )
Kill this process with
sudo kill -9 pid(pid is the process id , find where you located the line : second column)
Is there a way to use the VSCode Remote SSH extension to interact with a remote host that does not allow outbound internet connections?
Is it possible to download the vscode-server files from another system and copy to host?
I read this but I can't connect the server to internet.
When you connect to a host it executes a bash script that wgets or curls a tarball and extracts it in a directory in your home directory. Here's an offline workaround.
Attempt to connect, let it fail
On server, get the commit id
$ ls ~/.vscode-server/bin
553cfb2c2205db5f15f3ee8395bbd5cf066d357d
Download tarball replacing $COMMIT_ID with the the commit number from the previous step
For Stable Version
https://update.code.visualstudio.com/commit:$COMMIT_ID/server-linux-x64/stable
For Insider Version
https://update.code.visualstudio.com/commit:$COMMIT_ID/server-linux-x64/insider
Move tarball to ~/.vscode-server/bin/$COMMIT_ID/vscode-server-linux-x64.tar.gz
Extract tarball in this directory
$ cd ~/.vscode-server/bin/$COMMIT_ID
$ tar -xvzf vscode-server-linux-x64.tar.gz --strip-components 1
Connect again
You'll still need to install any extensions manually. There's a download button next to all the extensions in the marketplace. Once you have the .vsix file you can install them through the GUI with the Install from VSIX option in the extensions manager.
This is kind of a pain and hopefully they improve this process, but if you have a network-based home directory, you only have to do this once.
open vscode -> about
Version: 1.46.1
Commit: cd9ea6488829f560dc949a8b2fb789f3cdc05f5d
Date: 2020-06-17T21:17:14.222Z
Electron: 7.3.1
Chrome: 78.0.3904.130
Node.js: 12.8.1
V8: 7.8.279.23-electron.0
OS: Darwin x64 17.7.0
$COMMIT_ID = cd9ea6488829f560dc949a8b2fb789f3cdc05f5d
A new feature is being added to support offline install
However, you can now solve this issue by a new user setting in the Remote - SSH extension. If you enable the setting remote.SSH.allowLocalServerDownload, the extension will install the VS Code Server on the client first and then copy it over to the server via SCP.
Note: This is currently an experimental feature but will be turned on by default in the next release
https://code.visualstudio.com/blogs/2019/10/03/remote-ssh-tips-and-tricks
A a work around I have done the following:
Desktop ~/.ssh/config
...
Host *
RemoteForward 54321
...
Remote: ~/bin/wget in which ~/bin is added to PATH via .bashrc
#!/bin/bash
export LD_LIBRARY_PATH=$HOME/opt/lib/tsocks/
export TSOCKS_CONF_FILE=$HOME/opt/tsocks/tsocks.conf
$HOME/bin/tsocks /usr/bin/wget $#
Remote: ~/opt/tsocks/tsocks.conf
server = 127.0.0.1
server_port = 54321
server_type = 5
note tsocks binary has been scp-ed to ~/bin/tsocks and ~/opt/tsocks/ has been created with libtsocks.so which is normally stored in /usr/lib64/libtsocks.so
This is a work around that allows me to have wget functionality with out messing with anything outside my profile to get it to work (eg: no root required ... even though I have it).
Current Version of VS Code: 1.48.2
I just kill the wget process on the server end, and let the client download the archive and transfer it to the server end. That's quite easy as below.
make sure that you set in settings.json
"remote.SSH.allowLocalServerDownload": true,
execute the shell scrpits below.
# to find the <pid>
ps aux | grep wget | grep vscode-server
# kill the process
kill -9 <pid>
# then wait for the client downloading and transferring
# optional: If you want to know the progress, just
cd ~/.vscode-server/bin/<commit-id>/
watch -n 1 -d ls -rthl
I have a problem whith my installation of docker. When I launch my docker-compose up I have this error :
front_1 | /var/lock/apache2 already exists but is not a directory owned by www-data.
front_1 | Please fix manually. Aborting.
I have this error because I add this line in my dockerfile conf :
RUN usermod -u 1000 www-data
But if I delete this line, my symfony project doesn't work with docker.
Do you have any ideas to solve my problem ?
Best regards
As I see it, you are trying to change UID of user www-data inside docker to have the same ID as host machine user UID (you), so you can open project files in your IDE.
This introduces file permissions problems on apache2 service, which can't read it's own files (config, pid,...), simply because it is not the same user anymore.
Quick 'dirty' solution is to change only owner of symfony project files to UID 1000, but keep group (GID) to the www-data. This applies only for dev machine. Else you don't needed it. Run command inside container.
chown -R 1000:www-data /home/project
You can create some bash alias inside docker to have it at hand.
Other option is to use ACL which will set existing files and folder with permissions, which will get inherited to newly created files under given folder. This could be put to bootstrap script inside container. But only for DEV mode. This way you won't need to run chown.
chown -R 1000:www-data /home/project #set for existing files
/usr/bin/setfacl -R -m u:www-data:rwx -m u:0:rwx -m u:1000:rwx /home/project
/usr/bin/setfacl -dR -m u:www-data:rwx -m u:0:rwx -m u:1000:rwx /home/project
Each -m is for a different user. First is www-data (apache2), second is 0 (root) and third is 1000 (you).
Remember UID can change anytime. So this could create security hole if mentioned users are not having proper UID.
I used second method only for folders, where PHP via apache2 sets permissions (uploaded files, cache,...), but host user needs to access these files.
I'm a beginner Ruby on Rails Programmer and I'm trying to install Apache2 + Passenger(That's for Rails Deployment).. and at the end of the installation process, Passenger gave me a few lines to add to the file apache2.conf at /etc/apache2/ but I can't override this file.. I have no permission =( I've also uploaded an image showing me the error.
P.S => I'm logged into Ubuntu with my username and password.
Please help! and thanks,
Rodrigo.
The simplest way is to open the file with the sudoedit program, as in
sudoedit /etc/apache2/apache2.conf
which will prompt for your password and then open your editor.
After the installation has completed, add phpmyadmin to the apache configuration.
sudo nano /etc/apache2/apache2.conf
Add the phpmyadmin config to the file. Include
/etc/phpmyadmin/apache.conf
Restart apache:
sudo service apache2 restart
If you are a beginner in GNU/Linux, I want to notice, for run command with root privileges run it with sudo:
sudo <your_command>
If you want to get root privileges for current terminal session (no need to type sudo each command) run:
sudo -i
I hope this will help someone considering the number of years since the last post. I tried this, and it worked for me.
sudo bash
Then the command to edit. Then save the file. Below is the site I got the procedure from.
https://ubuntuforums.org/showthread.php?t=1845306
Enter the command:
sudo nano /etc/apache2.conf
Or you can use the following chmod 777 usr/local/apache2/conf/httpd.conf
this will enable you to read/write the config file but be warned if you are planning on putting apache2 online you must revert it back to the old permissions chmod 640 usr/local/apache2/conf/httpd.conf