When I ran the gem5 in a server, the error appeared.
[libprotobuf FATAL google/protobuf/stubs/common.cc:68] This program requires version 3.5.0 of the Protocol Buffer runtime library, but the installed version is 3.4.0. Please update your library. If you compiled the program yourself, make sure that your headers are from the same version of Protocol Buffers as your link-time library. (Version verification failed in "build/X86_MESI_Two_Level/proto/inst_dep_record.pb.cc".)
terminate called after throwing an instance of 'google::protobuf::FatalException'
what(): This program requires version 3.5.0 of the Protocol Buffer runtime library, but the installed version is 3.4.0. Please update your library. If you compiled the program yourself, make sure that your headers are from the same version of Protocol Buffers as your link-time library. (Version verification failed in "build/X86_MESI_Two_Level/proto/inst_dep_record.pb.cc".)
Aborted (core dumped)
According to the error information, I need version 3.5.0 of libprotobuf. But when I ran the command protoc --version, The output is "libprotoc 3.5.0" which shows that I already have version 3.5.0.
The same code can be run in another server. I run the command protoc --version in that server. It shows
"libprotoc 2.6.1".
Related
I'm trying to upgrade my version of RabbitMQ using chocolatey. This package has Erlang as a dependency, so installs the relevant version required. I've gone from 3.9.19 to 3.10 fine. However, when I try and go from 3.10 to 3.11.7 I get the following error:
beam\beam_load.c(169): Error loading module elixir:
This BEAM file was compiled for a later version of the run-time system than 24.
To fix this, please recompile this module with an 24 compiler.
(Use of opcode 178; this emulator supports only up to 176.)
ERROR! Failed to start Elixir.
error: {error,
{elixir,
{bad_return,
{{elixir,start,[normal,[]]},
{'EXIT',
{undef,
[{elixir,start,[normal,[]],[]},
{application_master,start_it_old,4,
[{file,"application_master.erl"},
{line,293}]}]}}}}}}
I don't know why this is happening, or if it's even a problem. I've not been able to find anything on this error. When I run RabbitMQ it appears to be running ok with the right version of Erlang. However, this error suggests that it's attempting to use Erlang version 24 (which was already installed as part of installing 3.9.19). How is it deciding what version of Erlang to use here? I checked my environment variables and it the ERLANG_HOME is set correctly.
Update
I tried going through the process again and installing rabbitmq 3.9.19 from chocolatey, upgrading to 3.10.1, then using the choco command to uninstall just Erlang 24.0 (using force). I then upgraded rabbitmq to version 3.11.8. This got rid of the previous error but showed another one stating:
ERLANG_HOME not set correctly.
Please either set ERLANG_HOME to point to your Erlang installation or
place the RabbitMQ server distribution in the Erlang lib folder.
However, when I checked the ERLANG_HOME environment variable it seemed to be set correctly, in that it was pointing now at Erlang OTP and not erl-24.0. So why is this error thrown?
I have a problem with communication with Atmega644P. I am using C232HM Cable and avrdude. Unfortunately, every attempt of communication ends with the following comment from the command prompt: avrdude: Error: no libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. I installed following driver from Zadig 2.5: WinUSB (v6.1.7600.16385) and the error still occurs. What should I do?
To get past that error message, you have to do what it says: install the library that AVRDUDE needs and then build AVRDUDE from source in a way that it detects the library and uses it. But I am not sure exactly what you are trying to do and I cannot be sure that this will ultimately work for you. If you haven't built code from sourt before, it can be a challenge.
You never said how you installed AVRDUDE, but you might try downloading a binary version from a different place before you attempt to compile it yourself. The Arduino IDE comes with a version of AVRDUDE, and there is also an AVRDUDE package in MSYS2 (which I contributed).
I am trying to build tensorflow from source on a remote server (with no superuser privileges) because I got this error when I simply installed with pip:
Loaded runtime CuDNN library: 7.1.2 but source was compiled with: 7.4.2. CuDNN library major and minor version needs to match or have higher minor version in case of CuDNN 7.0 or later version. If using a binary install, upgrade your CuDNN library. If building from sources, make sure the library loaded at runtime is compatible with the version specified during compile configuration.
I completed all the steps listed here successfully, but I still get the same error as above, despite setting CudNN version as 7.1.2 before building.
Is there any way I can see the configurations to verify that they have been set properly?
A file is generated after running ./configure with the name .tf_configure.bazelrc you can inspect that file.
Hi i have installed tensorflow using
https://devtalk.nvidia.com/default/topic/1038957/jetson-tx2/tensorflow-for-jetson-tx2-/post/5278617/#5278617
when i run the python script i get the following error:
libprotobuf FATAL google/protobuf/stubs/common.cc:61] This program requires version 3.5.0 of the Protocol Buffer runtime library, but the installed version is 2.6.1. Please update your library. If you compiled the program yourself, make sure that your headers are from the same version of Protocol Buffers as your link-time library. (Version verification failed in "external/protobuf_archive/src/google/protobuf/any.pb.cc".)
terminate called after throwing an instance of 'google::protobuf::FatalException'
what(): This program requires version 3.5.0 of the Protocol Buffer runtime library, but the installed version is 2.6.1. Please update your library. If you compiled the program yourself, make sure that your headers are from the same version of Protocol Buffers as your link-time library. (Version verification failed in "external/protobuf_archive/src/google/protobuf/any.pb.cc".)
Aborted (core dumped)
pip show protobuf i get Version: 3.6.1
Summary: Protocol Buffers
Home-page: https://developers.google.com/protocol-buffers/
Author: protobuf#googlegroups.com
Author-email: protobuf#googlegroups.com
License: 3-Clause BSD License
Location: /home/nvidia/vitualenv/lib/python2.7/site-packages
Requires: setuptools, six
Required-by: tensorflow-gpu, tensorboard
someone have some ideas how to solve this?
Thanks
Finally i got it worked. In the end i have to import tensorflow at the beginning of the python file. No other solution worked for me except this one.
I do not understand why.
If someone know the answer can you please explain me why?
Thanks
I used the following instructions to install Mono on a clean install of Ubuntu 12.
http://forums.osgrid.org/viewtopic.php?f=14&t=4625
When I run mono --runtime=v4.5 Test.exe, I get the following error:
WARNING: The runtime version supported by this application is
unavailable. Using default runtime: v2.0.50727.
If I set the runtime to v4.0, the program will run initially until it reaches a .Net 4.5 only method, specifically Monitor.IsEntered, causing a MissingMethodException to be thrown.
I do have a directory called /opt/mono-3.2.3/lib/mono/4.5.
How do I fix Mono so I can run this program under the 4.5 framework?
It looks like you found the answer: Mono hasn't implement Monitor.IsEntered() yet.
It's interesting why this TODO is not evident from the Mono Class Status page, though...