I am building an Addon to point a compass to another player constantly, and I do not want to do this via command blocks. I think I should use .MCFUNCTION files, but I am not sure. What should I do? I have already tried searching Google, but there seems to be no information on building add-ons.
This is for Minecraft: Bedrock Edition 1.16.
The command I would use is /execute <playerName> ~ ~ ~ setworldspawn ~ ~ ~. What this means is is will execute the setworldspawn ~ ~ ~ command on behalf of whoever <playerName> is. Then, the ~ ~ ~ means it would set the spawn to the player. Compasses always point to the spawn, and if this command was executed every tick, anyone with a compass could track the person because the person is at spawn.
Another question: Is there a way to make a command that lets players set who the <playerName> is? I don't need that to be in, but it would be nice if it was a possibility.
Is the tick.json the way to go? I cannot seem to find any information about it.
This is a little late, but you can set the player! Not in the way you might think, though. Let's say this is our original code: execute JohnUsername ~ ~ ~ spawnpoint
What you can actually do is use tags: execute #a[tag=targ] ~ ~ ~ spawnpoint
Now a player has to just do /tag #s add targ and they will become the target.
So you can have the player do this. One problem: You have to make sure to do /tag #s remove targ if you wanna switch. How do you counteract this? Make a function like this: [targetme.mcfunction]
tag #a remove targ
tag #p add targ
Now whenever i run /function targetme in the chat, I become the target and it takes away the target from whoever was before, and if no ones the target it still works and just gives me target. Sadly you can't do like /function targetadd Jim though :(. You need the player that wants to be hunter to run the function. (Or you can set up a system that selects a random player, such as replace tag #p add targ with tag #r add targ and when the function gets run someone is randomly selected)
Related
I'm having a weird issue in which I can't get parentheses to match in VB files in vim or gvim.
For example, if I start vim and insert Iif(test, 0, 1), I can use % to jump between the two parentheses like normal. Then if I run :set ft=vb, it stops working. Actually, I get one more jump, then it stops working.
I have tested this on two different machines running Windows and Linux and I get the same results.
Does anyone know why this might be?
You're using the matchit plugin that comes with Vim. In $VIMRUNTIME/ftplugin/vb.vim, it defines custom pairs (e.g. If...End If) which override the default pairs. To re-enable those (in addition), put the following into ~/.vim/after/ftplugin/vb.vim:
let b:match_words .= ',(:)'
Cp. :help b:match_words.
I'm just switch to zsh and now adapting the alias in which was printing some text (in color) along with a command.
I have been trying to use the $fg array var, but there is a side effect, all the command is printed before being executed.
The same occur if i'm just testing a echo with a color code in the terminal:
echo $fg_bold[blue] "test"
]2;echo "test" test #the test is in the right color
Why the command print itself before to do what it's supposed to do ? (I precise this doesn't happen when just printing whithout any wariable command)
Have I to set a specific option to zsh, use echo with a special parameter to get ride of that?
Execute the command first (keep its output somewhere), and then issue echo. The easiest way I can think of doing that would be:
echo $fg[red] `ls`
Edit: Ok, so your trouble is some trash before the actual output of echo. You have some funny configuration that is causing you trouble.
What to do (other than inspecting your configuration):
start a shell with zsh -f (it will skip any configuration), and then re-try the echo command: autoload colors; colors; echo $fg_bold[red] foo (this should show you that the problem is in your configuration).
Most likely your configuration defines a precmd function that gets executed before every command (which is failing in some way). Try which precmd. If that is not defined, try echo $precmd_functions (precmd_functions is an array of functions that get executed before every command). Knowing which is the code being executed would help you search for it in your configuration (which I assume you just took from someone else).
If I had to guess, I'd say you are using oh-my-zsh without knowing exactly what you turned on (which is an endless source of troubles like this).
I don't replicate your issue, which I think indicates that it's either an option (that I've set), or it's a zsh version issue:
$ echo $fg_bold[red] test
test
Because I can't replicate it, I'm sure there's an option to stop it happening for you. I do not know what that option is (I'm using heavily modified oh-my-zsh, and still haven't finished learning what all the zsh options do or are).
My suggestions:
You could try using print:
$ print $fg_bold[red] test
test
The print builtin has many more options than echo (see man zshbuiltins).
You should also:
Check what version zsh you're using.
Check what options (setopt) are enabled.
Check your ~/.zshrc (and other loaded files) to see what, if any, options and functions are being run.
This question may suggest checking what TERM you're using, but reading your question it sounds like you're only seeing this behaviour (echoing of the command after entry) when you're using aliases...?
I've done very little with batch files but I'm trying to track down a strange bug I've been encountering on a legacy system.
I have a number of .exe files in particular folder. This script is supposed to duplicate them with a different file name.
Code From Batch File
for %%i in (*.exe) do copy \\networkpath\folder\%%i \\networkpath\folder\%%i.backup.exe
(Note: The source and destination folders are THE SAME)
Example Of Desired Behavior:
File1.exe --> Becomes --> File1.exe.backup.exe
File2.exe --> Becomes --> File2.exe.backup.exe
Now first, let me say that this is not the approach I would take. I know there are other (potentially more straight forward) ways to do this. I also know that you might wonder WHY on earth we care about creating a FileX.exe.backup.exe. But this script has been running for years and I'm told the problem only started recently. I'm trying to pinpoint the problem, not rewrite the code (even if it would be trivial).
Example Buggy Output:
File1.exe.backup.exe
File1.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
etc...
File2.exe.backup.exe
File2.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
Not knowing anything about batch files, I looked at this and figured that the condition of the for statement was being re-evaluated after each iteration - creating a (near) infinite loop of copying (I can see that, eventually, the copy will fail when the names get too long).
This would explain the behaviour I'm seeing. And when cleaned the directory in question so that it had only the original File1.exe file and ran the script it produced the bug code. The problem is that I CANNOT replicate the behaviour anywhere else!?!
When I create a folder locally with a few .exe files and run the script - I get the expected output. And yes, if I run it again, I get one instance of 'File1.exe.backup.exe.backup.exe' (and each time I run it again, it increases in length by one). But I cannot get it to enter the near-infinite loop case.
It's been driving me crazy.
The bug is occurring on a networked location - so I've tried to recreate it on one - but again, no success. Because it's a shared network location, I wondered if it could have something to do with other people accessing or modifying files in the folder and even introduced delays and wrote a tiny program to perform actions in the same folder - but without any success.
The documentation I can find on the 'for' statement doesn't really help, but all of the tests I've run seem to suggest that the in (*.exe) section is only evaluated once at the beginning of execution.
Does anyone have any suggestions for what might be going on here?
I agree with Andriy M's comment - it looks to be related to Windows 7 Batch Script 'For' Command Error/Bug
The following change should fix the problem:
for /f "eol=: delims=" %%i in ('dir /b *.exe') do copy \\networkpath\folder\%%i \\networkpath\folder\%%i.backup.exe
Any file that starts with a semicolon (highly unlikely, but it can happen) would be skipped with the default EOL of semicolon. To be safe you should set EOL to some character that could never start a file name (or any path). That is why I chose the colon - it cannot appear in a folder or file name, and can only appear after a drive letter. So it should always be safe.
Copy supports wildcard characters also in target path. You can use
copy \\networkpath\folder\*.exe \\networkpath\folder\*.backup.exe
How do I navigate the MiniBufExplorer without going into the MiniBufExplorer window?
In lines 170-174 of minibufexpl.vim:
" To enable the optional mapping of <C-TAB> and <C-S-TAB> to a
" function that will bring up the next or previous buffer in the
" current window, you can put the following into your .vimrc:
"
" let g:miniBufExplMapCTabSwitchBufs = 1
I added that to my .vimrc, restarted a blank Vim, then did the following commands to bring up multiple buffers (and consequently, the MiniBufExplorer):
:e somefile
:e someotherfile
Now, with my cursor inside the file window (not the MiniBufExplorer window), I try CtrlTab and CtrlShiftTab to no effect. Something I missed?
I think this is most likely a conflict with snipMate, which I believe you have since you mention the tab mapping works in select mode. I tried to do it manually map <C-Tab> :bn<cr>,
and it did not work either. I now use map <C-P> :bp<cr> and map <C-N> :bn<cr> to navigate through buffers, and I suppose other mappings would work just as well as long as there is no conflict.
Minibuf explorer shortcuts (may require additional configuration):
[C-TAB] and [C-S-TAB] - move to next and prev buffers
Vim regular buffer shortcuts:
:bn and :bp - move to next and prev buffers
:b# - move to buffer of number #
:h :buffers - for additional help
Did you leave the " at the beginning of the let line? If so, it's commented out, and will not work. Otherwise, you may have a mapping conflict between plugins. The :map command will list current mappings.
It's easier to deal with mappings if you install headlights though.
So I found the question about how to view the change history of a file, but the change history of this particular file is huge and I'm really only interested in the changes of a particular method. So would it be possible to see the change history for just that particular method?
I know this would require git to analyze the code and that the analysis would be different for different languages, but method/function declarations look very similar in most languages, so I thought maybe someone has implemented this feature.
The language I'm currently working with is Objective-C and the SCM I'm currently using is git, but I would be interested to know if this feature exists for any SCM/language.
Recent versions of git log learned a special form of the -L parameter:
-L :<funcname>:<file>
Trace the evolution of the line range given by "<start>,<end>" (or the function name regex <funcname>) within the <file>. You may not give any pathspec limiters. This is currently limited to a walk starting from a single revision, i.e., you may only give zero or one positive revision arguments. You can specify this option more than once.
...
If “:<funcname>” is given in place of <start> and <end>, it is a regular expression that denotes the range from the first funcname line that matches <funcname>, up to the next funcname line. “:<funcname>” searches from the end of the previous -L range, if any, otherwise from the start of file. “^:<funcname>” searches from the start of file.
In other words: if you ask Git to git log -L :myfunction:path/to/myfile.c, it will now happily print the change history of that function.
Using git gui blame is hard to make use of in scripts, and whilst git log -G and git log --pickaxe can each show you when the method definition appeared or disappeared, I haven't found any way to make them list all changes made to the body of your method.
However, you can use gitattributes and the textconv property to piece together a solution that does just that. Although these features were originally intended to help you work with binary files, they work just as well here.
The key is to have Git remove from the file all lines except the ones you're interested in before doing any diff operations. Then git log, git diff, etc. will see only the area you're interested in.
Here's the outline of what I do in another language; you can tweak it for your own needs.
Write a short shell script (or other program) that takes one argument -- the name of a source file -- and outputs only the interesting part of that file (or nothing if none of it is interesting). For example, you might use sed as follows:
#!/bin/sh
sed -n -e '/^int my_func(/,/^}/ p' "$1"
Define a Git textconv filter for your new script. (See the gitattributes man page for more details.) The name of the filter and the location of the command can be anything you like.
$ git config diff.my_filter.textconv /path/to/my_script
Tell Git to use that filter before calculating diffs for the file in question.
$ echo "my_file diff=my_filter" >> .gitattributes
Now, if you use -G. (note the .) to list all the commits that produce visible changes when your filter is applied, you will have exactly those commits that you're interested in. Any other options that use Git's diff routines, such as --patch, will also get this restricted view.
$ git log -G. --patch my_file
Voilà!
One useful improvement you might want to make is to have your filter script take a method name as its first argument (and the file as its second). This lets you specify a new method of interest just by calling git config, rather than having to edit your script. For example, you might say:
$ git config diff.my_filter.textconv "/path/to/my_command other_func"
Of course, the filter script can do whatever you like, take more arguments, or whatever: there's a lot of flexibility beyond what I've shown here.
The closest thing you can do is to determine the position of your function in the file (e.g. say your function i_am_buggy is at lines 241-263 of foo/bar.c), then run something to the effect of:
git log -p -L 200,300:foo/bar.c
This will open less (or an equivalent pager). Now you can type in /i_am_buggy (or your pager equivalent) and start stepping through the changes.
This might even work, depending on your code style:
git log -p -L /int i_am_buggy\(/,+30:foo/bar.c
This limits the search from the first hit of that regex (ideally your function declaration) to thirty lines after that. The end argument can also be a regexp, although detecting that with regexp's is an iffier proposition.
git log has an option '-G' could be used to find all differences.
-G Look for differences whose added or removed line matches the
given <regex>.
Just give it a proper regex of the function name you care about. For example,
$ git log --oneline -G'^int commit_tree'
40d52ff make commit_tree a library function
81b50f3 Move 'builtin-*' into a 'builtin/' subdirectory
7b9c0a6 git-commit-tree: make it usable from other builtins
The correct way is to use git log -L :function:path/to/file as explained in eckes answer.
But in addition, if your function is very long, you may want to see only the changes that various commit had introduced, not the whole function lines, included unmodified, for each commit that maybe touch only one of these lines. Like a normal diff does.
Normally git log can view differences with -p, but this not work with -L.
So you have to grep git log -L to show only involved lines and commits/files header to contextualize them. The trick here is to match only terminal colored lines, adding --color switch, with a regex. Finally:
git log -L :function:path/to/file --color | grep --color=never -E -e "^(^[\[[0-9;]*[a-zA-Z])+" -3
Note that ^[ should be actual, literal ^[. You can type them by pressing ^V^[ in bash, that is Ctrl + V, Ctrl + [. Reference here.
Also last -3 switch, allows to print 3 lines of output context, before and after each matched line. You may want to adjust it to your needs.
Show function history with git log -L :<funcname>:<file> as showed in eckes's answer and git doc
If it shows nothing, refer to Defining a custom hunk-header to add something like *.java diff=java to the .gitattributes file to support your language.
Show function history between commits with git log commit1..commit2 -L :functionName:filePath
Show overloaded function history (there may be many function with same name, but with different parameters) with git log -L :sum\(double:filepath
git blame shows you who last changed each line of the file; you can specify the lines to examine so as to avoid getting the history of lines outside your function.