I've been using Rad Studio for some old projects on another Windows XP (32 bit) based PC. So, I wanted to move my projects new computer. But, after the setup, bds.exe didn't open. Same setup file works on Windows 10 PC (64 bit), but I am not able to open on Windows XP computer.
When I tried to open its closing immediately and giving just-in-time debug option from visual studio 2005. Also, it’s giving some error codes. But, I couldn’t find any solution for this issue.
When I wanted to open firstly following screen comes up.
Then, if I click no it’s closing. If I click yes following screen comes up.
Note: Closing Just-in-time debug doesn’t help to open bds.exe .
Related
Since some time i got some issue with my Visual Studio 2015 Community edition. When i am trying to debug my windows form application it's stack and when i click on visual studio window i see message
"Delay notification"
and i have to option either
"Switch To"
or
"Continue waiting"
. And it's never come back to work again i have to restart my computer to work again for some time again and then again. I am using windows 10. Do you have any clue why it happens?
Run Visual Studio's setup and click Repair. It's a long process, but works. Also, check if you have updated the Microsoft ASP.NET and Web Tools extension to the latest version.
On a Windows 8 machine with VS Express 2010, VS 2012, I've installed Visual Studio 2013 Ultimate Preview.
In the end of the installation, an error message appears, giving me this link to activate Hyper-V.
So i entered BIOS, I found a similar option for enabling Virtualization, and set it to Enable.
After finishing restart, I downloaded coreinfo.exe, opened the console as Admin, and checked for asterisk in the row where it said I should check. So there was, which means my computer supports SLAT.
When I go to Control Panel -> Programs -> Windows Features on/off, there is no Hyper-V there as is shown in the link that there will be, and I should select it and press OK to install/activate it.
Will this be fixed by reinstalling Visual Studio 2013 Ultimate Preview now?
Make sure you are running Windows 8 Pro 64-bit as the Hyper-V feature is a Pro Edition feature.
I am writing an application in VB.NET that will send emails using outlook. My problem is that I need the Office 2010 PIA to do this. The following are the steps I have already tried (I am using Visual Studio Express 2012):
Restarted the machine
Downloaded Office 2010 PIARedist and installed it
Restarted Visual Studio
Restarted the machine again
Uninstalled Office and the PIA and re-installed Office, making sure that the PIA was selected in the installation options (it was already selected by default, so presumably I installed it the first time I installed Office as well).
Restarted the machine again
Downloaded Office 2010 PIARedist and installed it again
Restarted VS
After each of these steps, the PIA is still not available in "Add Reference" in VS, nor do the files exist on my computer at all (a search for "Microsoft.Office.Interop.Outlook.dll" confirms this). I am running Windows 7 on my MacBook Pro. Does anyone know what my problem is here? This seems like a ridiculous amount of headache for such a simple feature.
PS The only reason I need the PIA is to be able to add CC recipients on the email. That's it. If anyone knows how to do that without the PIA, please let me know because I'd much rather just do that and be done with it.
PSS Both times when I installed the PIA itself, the installation ended silently (no indication of success or failure).
In case anyone stumbles on this question, I finally figured out how to add the interop. For some reason, it won't show up in the "Add References" window (maybe it's because I have VS2012 (11.0) and I'm using Office 2010...?) Anyway, I had to manually browse to it to add it. It was located in C:\Windows\assembly (all of the Office 2010 interops were in there). Also interesting was that a search of the entire C drive for 'Microsoft.Office.Interop.Outlook' or shortened versions of that string turned up absolutely no results, even though they are on the drive. One last note: although 'Microsoft Office 14.0 Object Library' shows up in the "Add References" window, adding that reference did not allow access to the interop.
"Unable to start debugging 'C:\Windows\System32\WWAHost.exe'. The Microsoft Visual Studio Remote Debugging Monitor (MSVSMON.EXE) does not appear to be running on the remote computer. This may be because a firewall is preventing communication to the remote computer. Please see Help for assistance on configuring remote debugging."
Searched for similar posts, but didn't found one. If duplicate just inform.
I am not trying to connect to any remote machine. Just testing on my local machine.
Is there any way to solve this issue. (I'm using Windows 8 Enterprise 64-bit, just a javascript project)
Problem solved. Installed Remote tools update from here and working fine. Thanks for responding. Closing the topic.
I had the same problem. I fixed it by changing properties/compile/target platform to x86 instead of Any CPU. It solved the problem in my case. Hope it helps.
This happened to me just now when I had a website set up in IIS for mydomain.com, and set my project's start up url (Local IIS) to mydomain.com, and then launched the project before remembering to add a record in the host files for the domain:
127.0.0.1 mydomain.com
This got me for a good hour before I remembered I never set the record. Adding the record fixed it right away.
Windows 7 x64, VS 2012
In my case, the Remote Debugging Monitor component was installed and the app was clearly configured to debug locally in settings. This was a WinForms app upgraded from VS 2008, .NET 3.5.
Turns out it was the Windows Firewall. By directly running:
C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Remote Debugger\x64\msvsmon.exe
A firewall dialog appeared where I could allow msvsmon.exe to run. After a VS 2012 re-start, debugging (locally) was fine!
Ensure you have Local Machine selected in this drop-down menu:
Windows 7 x64, VS 2012, VB.NET
I fixed it like this:-
Create a shortcut on your desktop to "C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Remote Debugger\x64\msvsmon.exe".
Right-click shortcut and select "Properties" from the dropdown menu. Select the "Compatibity" tab, tick "Run this program as administrator" and click OK
Create a shortcut on your desktop to "C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\devenv.exe".
Right-click shortcut and select "Properties" from the dropdown menu. Select the "Compatibity" tab, tick "Run this program as administrator" and click OK.
To start VS2012:-
Double-click the msvsmon shortcut icon (that you created above, to launch msvsmon). Wait for the "Visual Studio Remote Debugging Monitor (Administrator)" window to display before continuing ...
Double-click the "Visual Studio 2012 Professional" shortcut icon (that you created above, to launch VS2012)
In VS2012, ensure standard toolbar is visible.
In VS2012, ensure "Solution Platforms" dropdown (on standard toolbar) is visible and set to "x86".
and debug now works (for me anyway) ...
However after 15 minutes or so, debug may stop working and you may get the msvsmon error again. If that happens, simply close VS2012 and msvsmon and then start again (from "To start VS2012:-" above) ...
Myself and several other developers have been trying to look for a solution for this problem for about 3/4 hours as Visual Studio crashed then this error would occur (twice in 2 days). I then suddenly (after a lot of debugging and trying other suggestions and headbanging) I somehow realised that the file which was highlighted had changed and when I was trying to debug was not the MVC app project, once I changed it to my project's one it then worked.
Hope this helps and saves people from hours of pain!
I also got this error, I usually run sites under a named user (which is also a database user) and forgot to set the Application Pool. (parliament's answer also helped me)
For me this worked in VS2013:
Save your work, close Visual Studio then reopen your project
I encountered this error as well.
The cause of mine was that I had accidentally emptied out the following property
Properties->Debugging->WorkingDirectory
Changing it to:
inherit from parent or project defaults
Solved the issue.
If you are using Microsoft's Azure, try attaching manually the debugger:
I have outlined the steps in the following answer:
https://stackoverflow.com/a/35738995/1057052
I would like to run a .exe file made with visual studio 2003 but I get an error every time I run it on a windows 7 machine, vista machine, and xp machine. The error on Windows 7 and vista says "application has stopped working" and then makes me close the error box.
In windows xp it's a little different error, "the application failed to operate (0xc0000135) Click on OK to terminate the application."
That error code seems to indicate the application failed to initialize correctly.
It is possible that the anticipated .NET version is not present.
As far as I know, VS 2003 by default compiles against the .NET 1.1 library. There is no straightforward way of installing this on a Windows 7 or Vista box. Do you need to compile it against the .NET 1.1 library, or can you load it in VS2005, change the output .net version to 2.0 or higher, and recompile the application?
If you have the source code to the application, try running the application in debug mode and stepping through line by line until you find the exception. If you do not have the source code, possibly try running the application in a couple different compatibility modes. Another option to try is to check the windows event log for anything more specific.
If you want to get really deep into it, you can use SysInternals ProcMon.exe and filter on the failing exe to view the WinAPI calls that are happening during the failure.
Also, a basic search of forums shows that error is usually accompanied with framework issues. Either recompile the application or check out what your required framework is in the VS2003 project settings.