I want to insert a line "new line" into a file "Textfile.txt" at line number 3 in AIX.
Before insertion Textfile.txt looks like
one
two
four
After Insertion Textfile.txt looks like
one
two
new line
four
I have already done it on Linux how ever with AIX I am finding it not working with solution of Linux.
Surprisingly I couldn't find a simple solution for this problem anywhere.
I am using this command in Linux and is working
echo "target_node = ${arr[0]}"
echo "target_file = ${arr[1]}"
echo "target_line = ${arr[2]}"
echo "target_text = ${arr[3]}"
escape "$(ssh -f ${arr[0]} "sed -i "${arr[2]}i$(escape ${arr[3]})" ${arr[1]}; exit")"
To sum the previous bits of information written as comments:
Option -i doesn't exist in AIX!sed, use a temporary file; the syntax of command is more strict than in Linux.
sed '2a\
Insert this after the 2nd line' "$target_file" >"$target_file.tmp"
mv -- "$target_file.tmp" "$target_file"
Hi Thanks for the help,
I created script in such a way that it copies the file to linux update changes and movies to AIX.
Related
I created a batch script for windows that I use for mux mkv files.
When launch this command:
ffprobe -v 0 -select_streams s -show_entries stream=index:disposition=default -of compact=nk=0 file.mkv | findstr disposition:default=1
Output is:
stream|index=3|disposition:default=1
How can filter and print only number "3" and put it in a variable?
I submit a new command that simplify output:
ffprobe -v 0 -select_streams s -show_entries stream=index:disposition=forced:stream_tags=language -of csv=nk=1:p=0 file.mkv | FINDSTR /C:"1,ita"
Output is:
3,1,ita
"3" is track id, "1" is forced flag, "ita" is track language. To create a variable that contains only the track id (e.g. 3) to be inserted in a mkvmerge command, I ran this command:
FOR /F "delims=, tokens=1" %%# IN ('ffprobe -v 0 -select_streams s -show_entries stream=index:disposition=forced:stream_tags=language -of csv=nk=1:p=0 file.mkv ^| FINDSTR /C:"1,ita"') DO SET subid=%%#
But nothing happens! Mkvmerge report this error: Error: Invalid track ID or language code in '-s '.
I don't really know where the mistake is!
Batchfile approach
You need to execute your command inside a for statement inside a batch file to be able to capture the output lines and process them further. Check for /? on the command line and the part with for /f and learn about "usebackq".
The key point is, that you need to escape several special characters from your command, if it is executed in the for statement and not on the command line prompt directly.
Try getting this piece to work and post your solution as update to your answer if you like. Then we can get to the second part of extracting the number.
I have a requirement for which I need to write a ksh script that reads command line parameters into arrays and creates DML statements to insert records into an oracle database. I've created a script as below to achieve this. However, the user invoking the script doesn't have permission to write into the directory where the script has to run. So, is there a way we can fire multiple inserts on the database without connecting to sqlplus multiple times within the loop and at the same time, NOT create temp sql file as below? Any ideas are highly appreciated. Thanks in advance!
i=0
while (( i<$src_tbl_cnt ))
do
echo "insert into temp_table values ('${src_tbl_arr[$i]}', ${ins_row_arr[$i]}, ${rej_row_arr[$i]});" >> temp_scrpt.sql
(( i+=1 ))
done
echo "commit; disc; quit" >> temp_scrpt.sql
sqlplus user/pass#db # temp_scrpt.sql
Just use the /tmp directory.
The /tmp directory is guaranteed to be present on any unix-family server. It is there precisely for needs like this. Definitely do something like add the current process ID in the file name so that multiple users don't step on each other. So the total name is something like /tmp/temp_$PID_scrpt.sql or the like.
When done, be sure to also delete that file--say, in a line right after the sqlplus call. Thus be sure to store the file name in a variable and delete what's in that variable.
It should go without saying, but in a well run shop: 1) The admins should have put more than enough space in /tmp, 2) All the users in the community should not be deleting other's files in /tmp or overloading it so it runs out of space. 3) The admins should setup a job that deletes files from /tmp after a certain age so that if your script fails before it deletes the temporary file, it won't be there forever.
So really, this answer is more about /tmp and managing it effectively--but that really is what you need. Using temporary files is a powerful technique, so your design is good. And the reality that users often won't have rights in a directory is common, so /tmp is your answer.
Instead of creating a temporary file you can directly pipe the output of an input generating block into sqlplus, in your shell script.
Example:
{
echo 'set auto off;'
for ((i=0; i<100; i++)); do
echo "insert into itest(i) values ($i);"
done
# echo 'rollback;' # for testing
echo 'commit;'
} | sqlplus -S juser/secret#db > /dev/null
This works with Ksh 93 and Bash (perhaps even with Ksh 88 modulo the (( expression syntax).
The corresponding DDL statement for the test table:
create table itest ( i number(36) ) ;
PS: Btw, even when creating a temporary file is preferred - redirecting the output is way more efficient than doing an append-style redirect for each line, e.g.:
{ for ((i=0; i<100; i++)); do echo "line $i"; done; echo end; } > foo.tmp
the below piece of code will keep connecting to SQLplus multiple times or it will connect only once ?
{
echo 'set auto off;'
for ((i=0; i<100; i++)); do
echo "insert into itest(i) values ($i);"
done
echo 'rollback;' # for testing
echo 'commit;'
} | sqlplus -S juser/secret#db > /dev/null
I have a long text file of redis commands that I need to execute using the redis command line interface:
e.g.
DEL 9012012
DEL 1212
DEL 12214314
etc.
I can't seem to figure out a way to enter the commands faster than one at a time. There are several hundred thousands lines, so I don't want to just pile them all into one DEL command, they also don't need to all run at once.
the following code works for me with redis 2.4.7 on mac
./redis-cli < temp.redisCmds
Does that satisfy your requirements? Or are you looking to see if there's a way to programmatically do it faster?
If you don't want to make a file, use echo and \n
echo "DEL 9012012\nDEL 1212" | redis-cli
The redis-cli --pipe can be used for mass-insertion. It is available since 2.6-RC4 and in Redis 2.4.14.
For example:
cat data.txt | redis-cli --pipe
More info in: http://redis.io/topics/mass-insert
I know this is an old old thread, but adding this since it seems missed out among other answers, and one that works well for me.
Using heredoc works well here, if you don't want to use echo or explicitly add \n or create a new file -
redis-cli <<EOF
select 15
get a
EOF
I am trying to delete last row in the file generated by nzsql.Please find the below query.
nzsql -A -c "SELECT * FROM AM_MAS_DIVISION_DIM" > abc.out
When I execute this query the output will be generated and stored in abc.out.This will include both header columns as well as some time information at the bottom.But I don't need the bottom metadata and want to keep only my header columns. How can I do this using only nzsql.Please help me.Thanks in advance.
use -r flag in the nzsql command to avoid getting that row [assuming the metadata referred in question is the row count summary line, ex: (3 rows)]
-r Suppresses the row count that is displayed at the end of the SQL output.
reference: http://pic.dhe.ibm.com/infocenter/ntz/v7r0m3/index.jsp?topic=%2Fcom.ibm.nz.adm.doc%2Fr_sysadm_nzsql_command.html
Why don't you just pipe the output to a unix command to remove it? I think something like this will work:
nzsql -A -c "SELECT * FROM AM_MAS_DIVISION_DIM" | sed '$d' > abc.out
Seems to be a recommended solution for getting rid of the last line (although ed, gawk, and other tools can handle it).
I'm trying to load a sql from a file in bash and execute the loaded sql. The sql file needs to be versatile, meaning it cannot be altered in order to make things easy while being run in bash (escaping special characters like * )
So I have run into some problems:
If I read my sample.sql
SELECT * FROM SAMPLETABLE
to a variable with
ab=`cat sample.sql`
and execute it
db2 `echo $ab`
I receive an sql error because by doing a cat the * has been replaced by all the files in the directory of sample.sql.
Easy solution would be to replace "" with "\" . But I cannot do this, because the file needs to stay executable in programs like DB Visualizer etc.
Could someone give me hint in the right direction?
The DB2 command line processor has options that accept a filename as input, so you shouldn't need to load statements from a text file into a shell variable.
This command will execute all SQL statements in the file, with newline treated as the statement terminator:
db2 -f sample.sql
This command will execute all SQL statements in the file, with semicolon treated as the statement terminator:
db2 -t -f sample.sql
Other useful CLP flags are:
-x : Suppress the column headings
-v : Echo the statement text immediately before execution
-z : Tee a copy of all CLP output to the filename immediately following this flag
Redirect stdin from the file.
db2 < sample.sql
In case, you have a variable used in your script and wanted to get it replaced by the shell before executed in DB2 then use this approach:
Contents of File.sql:
cat <<xEOF
insert values(1,2) into ${MY_SCHEMA}.${MY_TABLE};
select * from ${MY_SCHEMA}.${MY_TABLE};
xEOF
In command prompt do:
export MY_SCHEMA='STAR'
export MY_TAVLE='DIMENSION'
Then you are all good to get it executed in DB2:
eval File.sq |db2 +p -t
The shell will replace the global variables and then DB2 will execute it.
Hope it helps.