Tried to make a single signature transfer between two address generated using node in regtest mode. During which I got the following
Error -> mandatory-script-verify-flag-failed (Signature must be zero for failed CHECK(MULTI)SIG operation) (code 16)
Following was the flow.
createrawtransaction -> args: [ UTXO (txid,vout,scriptPubKey,amount), Receiver address, change address]
-> Success
signrawtransactionwithkey -> args: [Hex-Transaction (output of createrawtransaction), PrivateKey, UTXO (txid,vout,scriptPubKey,amount) ] -> Success
sendrawtransaction -> args: [Hex- Signed Transaction (output of signrawtransactionwithkey)] -> Failed
From basic research, many suggested to add amount field in the signrawtransactionwithkey, Which I did, even after then I was getting the same error.
It is to be noted that the this error came all of a sudden, the Node setup was working fine for months. This happens only in a particular linux machine. Is there any other factors in the host machine can be affect Bitcoin Cash ABC node and cause this issue?
Bitcoin Cash ABC Node running in Regtest mode.
This error may arise due to older having older versions too, try updating the core. I got this error in 0.20.8 but later I updated the node to 0.21.8 it works fine. Not sure what is happening, or is there any kind of expiry to the Bitcoin Core ABC releases.
Related
I am trying to run the example "optaplanner-mixedvrp-experiment" developed by Geoffrey De Smet and when I run it it throws me the following error:
Caused by: java.lang.IllegalStateException: The entity (MY) has a
variable (previousStandstill) with value (MUNO) which has a
sourceVariableName variable (nextVisit) with a value (WERBOMONT) which
is not null. Verify the consistency of your input problem for that
sourceVariableName variable.
I have not made any change, I have only cloned and executed it, I import and solve it and it throws me this error.
Do you know what could be happening?
I am applying it in the development of a variant of VRP with multiple deliveries and collections, but it throws me the same error. I have activated the FULL_ASSERT mode and nextVisit, previousStandstill, visitIndex are always null
It's been a long time since I looked at that code, so it's using an old version of optaplanner. Our goal is still to clean it up and offer an out of the box example for VRPPD (and probably remove some boilerplate along the way, using the upcoming #CollectionPlanningVariabe etc). That being said, we have multiple users&customers who used that optaplanner-mixedvrp-experiment to successfully build VRPPD implementations.
Which dataset did you try?
FWIW, that IllegalStateException says that when A.previous = B, the B.next is not A. So either the dataset importer didn't import it correctly - before calling solve() - especially if it fails before the first CH step in FULL_ASSERT. Or one of the custom moves corrupted the model.
Using the following code to load data in Aerospike. data is a list of maps of type BinMap
for _, binMap := range data {
id, ok := binMap["id"].(string)
key, _ := as.NewKey("test", "myset", id)
err := shared.Client.Put(nil, key, binMap)
if err !=nil {
fmt.Println(err)
}
After loading few records, the following error message is received.
command execution timed out on client: Exceeded number of retries.
See `Policy.MaxRetries`. (last error: Node not found for partition
test:711 in partition table.)
For each iteration, the partition test number changes.
The error continues even after waiting for 5 seconds after each Put command. I am not sure what timeout is reported in the error message.What client configuration is required for go client?
Using MacOs 10.15.3; go client; Aerospike running on docker 2.2.0.3
There's a good chance your cluster hasn't formed correctly, or that its networking isn't properly set up to give clients access to all the nodes. Since you're using Docker, take a look at Lucien's Medium post How do I get a 2 nodes Aerospike cluster running quickly in Docker without editing a single file?.
Just starting with noflo, I'm baffled as why I'm not able to get a simple flow working. I started today, installing noflo and core components following the example pages, and the canonical "Hello World" example
Read(filesystem/ReadFile) OUT -> IN Display(core/Output)
'package.json' -> IN Read
works... so far fine, then I wanted to change it slightly adding "noflo-rss" to the mix, and then changing the example to
Read(rss/FetchFeed) OUT -> IN Display(core/Output)
'http://xkcd.com/rss.xml' -> IN Read
Running like this
$ /node_modules/.bin/noflo-nodejs --graph graphs/rss.fbp --batch --register=false --debug
... but no cigar -- there is no output, it just sits there with no output at all
If I stick a console.log into the sourcecode of FetchFeed.coffee
parser.on 'readable', ->
while item = #read()
console.log 'ITEM', item ## Hack the code here
out.send item
then I do see the output and the content of the RSS feed.
Question: Why does out.send in rss/FetchFeed not feed the data to the core/Output for it to print? What dark magic makes the first example work, but not the second?
When running with --batch the process will exit when the network has stopped, as determined by a non-zero number of open connections between nodes.
The problem is that rss/FetchFeed does not open a connection on its outport, so the connection count drops to zero and the process exists.
One workaround is to run without --batch. Another one I just submitted as a pull request (needs review).
In MT4, there exists a stage/state: when we switch from AccountA to AccountB, when Connection is established and init() and start() are triggered by MT4; but before the "blinnnggg" (sound) when all the historical/outstanding trades are loaded from Server.
Switch Account>Establish Connection>Trigger Init()/Start() events>Start Downloading of Outstanding/Historical trades>Completed Downloading (issue "bliinng" sound).
I need to know (in MQL4) that all the trades are completed downloaded from the tradeServer --to know that the account is truly empty -vs- still downloading history from tradeServer.
Any pointer will be appreciated. I've explored IsTradeAllowed() IsContextBusy() and IsConnected(). All these are in "normal" state and the init() and start() events are all fired ok. But I cannot figure out if the history/outstanding trade lists has completed downloading.
UPDATE: The final workaround I finally implemented was to use the OrdersHistoryTotal(). Apparently this number will be ZERO (0) during downloading of order history. And it will NEVER be zero (due to initial deposit). So, I ended-up using this as a "flag".
Observation
As the problem was posted, there seems no such "integrated" method for MT4-Terminal.
IsTradeAllowed() reflects an administrative state of the account/access to the execution of the Trading Services { IsTradeAllowed | !IsTradeAllowed }
IsConnected() reflects a technical state of the visibility / login credentials / connection used upon an attempt to setup/maintain an online connection between a localhost <-> Server { IsConnected() | !IsConnected() }
init() {...} is a one-stop setup facility, that is/was being called once an MT4-programme { ExpertAdvisor | Script | TechnicalIndicator } was launched on a localhost machine. This facility is strongly advised to be non-blocking and non-re-entrant. A change from the user account_A to another user account_B is typically ( via an MT4-configuration options ) a reason to stop an execution of a previously loaded MQL4-code ( be it an EA / a Script / a Technical Indicator ) )
start() {...} is an event-handler facility, that endlessly waits, for a next occurrence of an FX-Market Event appearance ( being propagated down the line by the Broker MT4-Server automation ) that is being announced via an established connection downwards, to the MT4-Terminal process, being run on a localhost machine.
A Workaround Solution
As understood, the problem may be detected and handled indirectly.
While the MT4 platform seems to have no direct method to distinguish between the complete / in-complete refresh of the list of { current | historical } trades, let me propose a method of an indirect detection thereof.
Try to launch a "signal"-trade ( a pending order, placed geometrically well far away, in the PriceDOMAIN, from the current Ask/Bid-levels ).
Once this trade would be end-to-end registered ( Server-side acknowledged ), the local-side would have confirmed the valid state of the db.POOL
Making this a request/response pattern between localhost/MT4-Server processes, the localhost int init(){...} / int start(){...} functionality may thus reflect a moment, when the both sides have synchronised state of the records in db.POOL
I am running a Spark job on a two node standalone cluster (v 1.0.1).
Spark execution often gets stuck at the task mapPartitions at Exchange.scala:44.
This happens at the final stage of my job in a call to saveAsTextFile (as I expect from Spark's lazy execution).
It is hard to diagnose the problem because I never experience it in local mode with local IO paths, and occasionally the job on the cluster does complete as expected with the correct output (same output as with local mode).
This seems possibly related to reading from s3 (of a ~170MB file) immediately prior, as I see the following logging in the console:
DEBUG NativeS3FileSystem - getFileStatus returning 'file' for key '[PATH_REMOVED].avro'
INFO FileInputFormat - Total input paths to process : 1
DEBUG FileInputFormat - Total # of splits: 3
...
INFO DAGScheduler - Submitting 3 missing tasks from Stage 32 (MapPartitionsRDD[96] at mapPartitions at Exchange.scala:44)
DEBUG DAGScheduler - New pending tasks: Set(ShuffleMapTask(32, 0), ShuffleMapTask(32, 1), ShuffleMapTask(32, 2))
The last logging I see before the task apparently hangs/gets stuck is:
INFO NativeS3FileSystem: INFO NativeS3FileSystem: Opening key '[PATH_REMOVED].avro' for reading at position '67108864'
Has anyone else experience non-deterministic problems related to reading from s3 in Spark?